| Product Identification | Back to Contents | 【Product Name】
6-Undecanone | 【Synonyms】
Amyl ketone
Diamyl ketone
Dipentyl ketone
Pentyl ketone | 【CAS】
927-49-1 | 【Formula】
C11H22O | 【Molecular Weight】
170.33 | 【EINECS】
213-150-9 | 【RTECS】
YQ2828000 | 【RTECS Class】
Drug | 【Beilstein/Gmelin】
1749440 | 【Beilstein Reference】
4-01-00-03376 |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
Colorless liquid. | 【Solubility in water】
Insoluble | 【Melting Point】
15.5 | 【Boiling Point】
228 | 【Vapor Pressure】
0.08 (25 C) | 【Density】
0.831 g/cm3 (20 C) | 【Partition Coefficient】
4.09 | 【Heat Of Vaporization】
46.3 kJ/mol | 【Vapor Density】
5.87 | 【Refractive Index】
1.4268 (20 C) |
| First Aid Measures | Back to Contents | 【Ingestion】
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. | 【Inhalation】
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. | 【Skin】
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. | 【Eyes】
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. |
| Handling and Storage | Back to Contents | 【Storage】
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. | 【Handling】
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. |
| Hazards Identification | Back to Contents | 【Ingestion】
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. | 【Inhalation】
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. | 【Skin】
May cause skin irritation. | 【Eyes】
May cause eye irritation. | 【Hazards】
During a fire, irritating and highly toxic gasesmay be generated by thermal decomposition or combustion. | 【EC Safety Phrase】
S 24/25 | 【UN (DOT)】
1224 |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | 【Respirators】
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
88 | 【Fire Fighting】
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Containers may explode when heated. Extinguishing media: Use water spray to cool fire-exposed containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam. | 【Fire Potential】
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Provide ventilation. |
| Stability and Reactivity | Back to Contents | 【Stability】
Stable under normal temperatures and pressures. | 【Incompatibilities】
Strong oxidizing agents, strong reducing agents. | 【Decomposition】
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, acrid smoke and fumes. | 【Combustion Products】
Fire may produce irritating, corrosive and/or toxic gases. |
|
| Company Name: |
J & K SCIENTIFIC LTD. |
| Tel: |
010-82848833 400-666-7788 |
| Fax: |
86-10-82849933 |
| WebSite: |
http://www.jkchemical.com |
| Company Name: |
China DongFan Chemical Co.,LTD |
| Tel: |
86-0571-85151182 |
| Fax: |
86-0571-85151182 |
| WebSite: |
www.chemicalbook.com/ShowSupplierProductsList14819/0.htm |
|