ChemicalBook >>Diallyl bisphenol A>>2,2'-Diallylbisphenol A(1745-89-7)

2,2'-Diallylbisphenol A(1745-89-7)

2,2'-Diallylbisphenol A(1745-89-7)
Product IdentificationBack to Contents
【Product Name】

2,2'-Diallylbisphenol A
【Synonyms】

1-Butene, 2,3,4-trichloro
2,3,4-Trichlorobutene
Trichlorobutylene
【CAS】

2431-50-7
【CAS】

51023-22-4
【Formula】

C4H5Cl3
【Molecular Weight】

159.44
【EINECS】

219-397-9
【RTECS】

EM9044633
【RTECS】

EM9046000
【RTECS Class】

Other
【RTECS Class】

Tumorigen
【Beilstein/Gmelin】

1745897
【Beilstein Reference】

3-01-00-00725
【EC Index Number】

602-076-00-6
【EC Class】

Carcinogenic Category 3; Toxic; Harmful; Irritant; Dangerous for the Environment
Physical and Chemical PropertiesBack to Contents
【Appearance】

A colorless liquid.
【Appearance】

Mixture of isomers. Only one example shown.
【Solubility in water】

Insoluble
【Melting Point】

-52
【Boiling Point】

155
【Boiling Point】

157 - 160 (680 torr)
【Density】

1.3382 g/cm3 (20 C)
【Refractive Index】

1.4861 (24 C)
First Aid MeasuresBack to Contents
【Ingestion】

Seek medical assistance.
【Inhalation】

Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult.
【Inhalation】

Highly toxic, may be fatal if inhaled, swallowed or absorbed through skin. Effects of contact or inhalation may be delayed.
【Skin】

Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.
【Skin】

Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact.
【Eyes】

See Skin.
【Eyes】

Immediately flush with running water for at least 20 minutes.
Handling and StorageBack to Contents
【Storage】

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
【Handling】

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards IdentificationBack to Contents
【Inhalation】

Highly toxic, may be fatal if inhaled, swallowed or absorbed through skin. Effects of contact or inhalation may be delayed.
【Skin】

Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact.
【Eyes】

See Skin.
【Hazards】

Containers may explode when heated.
【Hazards】

Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form.
【UN (DOT)】

2322
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Wear appropriate protective gloves, clothing and goggles.
【Respirators】

Wear positive pressure self-contained breathing apparatus (SCBA).
【Exposure Effects】

The toxological properties of this substance have not been fully investigated.
Fire Fighting MeasuresBack to Contents
【Fire Fighting】

Small Fires: Dry chemical, carbon dioxide or water spray. Large Fires: Water spray, fog or regular foam.
【Fire Fighting】

Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. Keep run-off water out of sewers and water sources. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible.
【Fire Potential】

Combustible material: may burn but does not ignite readily.
【Fire Potential】

May burn but does not ignite readily.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Cover with plastic sheet to prevent spreading. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS.
【Small spills/leaks】

Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Attempt to stop leak if without undue personnel hazard.
Stability and ReactivityBack to Contents
【Incompatibilities】

May react vigorously with strong oxidizing agents May react exothermically with reducing agents to release hydrogen gas.
【Stability】

No data.
【Combustion Products】

Fire may produce irritating, corrosive and/or toxic gases.
Transport InformationBack to Contents
【UN Number】

2322
【Hazard Class】

6.1
【Packing Group】

II
Company Name: Chengdu Yuanda chemical co.,ltd
Tel: 028-85356300 18980937689
Fax: +86-28-85356300
WebSite: http://www.ydachem.com
Company Name: BeiJing Hwrk Chemicals Limted
Tel: 0757-86329057 18501085097
Fax: 010-89508210
WebSite: www.hwrkchemical.com
Company Name: BeiJing Hwrk Chemicals Limted
Tel: 0757-86329057 18934348241
Fax: 010-89508210
WebSite: www.hwrkchemical.com/
Company Name: Energy Chemical
Tel: 021-021-58432009 400-005-6266
Fax: 021-58436166
WebSite: http://www.energy-chemical.com
Company Name: Shanghai Hanhong Scientific Co.,Ltd.
Tel: 021-54306202 13764082696;
Fax:
WebSite: https://www.hanhongsci.com
Company Name: Chemsky (shanghai) International Co.,Ltd
Tel: 021-50135380
Fax:
WebSite: www.shchemsky.com
Company Name: Aemon Chemical
Tel: 0086-755-86198205
Fax:
WebSite: www.aemonchem.com
Company Name: Yan Tai Heng Nuo Chemical Technology Co., Ltd.
Tel: 0535-6397790 18653519533
Fax: 0535-6397740
WebSite: http://www.hengnuochem.com