脂肪酸甲酯2级
分 子 式:C19H36O2 物化性质:脂肪酸甲酯系淡黄色液体,熔点2℃,相对密度0.875(20/4℃),不溶于水。结构稳定,没有腐蚀性。用 途:主要用于生产环氧脂肪酸甲酯,应用于增塑剂行业。可加氢制作高级脂肪醇,亦可直接用作柴油及燃料或复配燃烧,可降低二氧化硫的排放量,同时也是生产脱脂剂﹑渗透剂﹑乳化剂﹑油漆的主要原料。
Fatty acid methyl ester Grade-2
Molecular Formula: C19H36O2
Physicochemical properties: Fatty Acid epoxy methyl ester is yellowish liquid with melting point of 2℃,and relative density of 0.875(20/4℃),it is insoluble in water with structural stability and no corrosion.
Purpose:it is applied in plasticizer line,mainly used in producing epoxy fatty acid methyl ester.it can be made into higher aliphatic alcohol by adding hydrogen,.and also can be directly used as diesel fuel and fuel or compound burning,to reduce the emissions of sulfur dioxide.it is also the raw material of procucing the degreaser,penetrant, emulsifier and paint.
产品指标(Product Index)
项目
标准要求
检验结果
含量 (Content)(%)
≥95
98
水份(Moisture) (%)
≤0.1
0.05
皂化价
(Saponification value) (mgkoh/g)
160-190
185
碘值(Iodine value)(g/100g)
80-120
120
酸值(Acid value) (mg koh/g)
≤2
0.8
密度 (Density)(g/ml)
0.87-0.89
0.875
闪点(Flash point)
160℃
178℃
凝固点
(condensation point)
≤5℃
2℃
备注 Remarks
含量检测采用气象色谱法
Analysed by Gas Chromatography
河北金谷油脂科技有限公司
联系商家时请提及chemicalbook,有助于交易顺利完成!