Chemical Safety Data Sheet MSDS / SDS

2-PHENOXYPROPANOL

Revision Date:2026-03-20Revision Number:1

SECTION 1: Identification of the substance/mixture and of the company/undertaking

Product identifier

Product name: 2-PHENOXYPROPANOL
CBnumber: CB4158174
CAS: 4169-04-4
EINECS Number: 224-027-4
Synonyms: 1-Propanol, 2-phenoxy-

Relevant identified uses of the substance or mixture and uses advised against

Relevant identified uses: For R&D use only. Not for medicinal, household or other use.
Uses advised against: none

Company Identification

Company: Chemicalbook
Address: Building 1, Huihuang International, Shangdi 10th Street, Haidian District, Beijing
Telephone: 010-86108875

SECTION 2: Hazards identification

GHS Label elements, including precautionary statements

Symbol(GHS)

Signal wordDanger

Precautionary statements

P310 Immediately call a POISON CENTER or doctor/physician.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

Hazard statements

H318 Causes serious eye damage

SECTION 3: Composition/information on ingredients

Substance

Product name: 2-PHENOXYPROPANOL
Synonyms: 1-Propanol, 2-phenoxy-
CAS: 4169-04-4
EC number: 224-027-4
MF: C9H12O2
MW: 152.19

SECTION 4: First aid measures

If inhaled

Remove person to fresh air and keep comfortable for breathing. Get medical advice/ attention if you feel unwell.

In case of skin contact

Take off all contaminated clothing immediately. If on skin, rinse well with water. If skin irritation or rash occurs: Get medical advice/ attention.

In case of eye contact

Rinse with plenty of water. If easy to do, remove contact lens, if worn. If eye irritation persists: Get medical advice/ attention.

If swallowed

Call a POISON CENTER or doctor/ physician if you feel unwell. Rinse mouth.

Most important symptoms and effects, both acute and delayed

None known.

SECTION 5: Firefighting measures

Suitable extinguishing media

Dry powder, Foam, Water spray, Carbon dioxide (CO2)

Specific hazards during fire fighting

No information available.

Specific extinguishing methods

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Immediately evacuate personnel to safe areas. Remove undamaged containers from fire area if it is safe to do so.

Special protective equipment for fire-fighters

Use personal protective equipment.

SECTION 6: Accidental release measures

Personal precautions, protective equipment and emergency procedures

Wear suitable protective equipment. Keep people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-involved personnel should be controlled around the leakage area by roping off, etc.

Environmental precautions

Prevent product from entering drains.

Methods and materials for containment and cleaning up

Collect as much of the spill as possible with a suitable absorbent material.

SECTION 7: Handling and storage

Handling

Technical measures

Prevent generation of vapor or mist.

Local/Total ventilation

Ensure adequate ventilation. Use a local exhaust ventilation.

Advice on safe handling

Avoid contact with skin, eyes and clothing. Wear personal protective equipment. Wash hands and face thoroughly after handling.

Avoidance of contact

Oxidizing agents

Storage

Conditions for safe storage

Keep container tightly closed. Store in a cool and shaded area.

SECTION 8: Exposure controls/personal protection

Ingredients with workplace control parameters

Contains no substances with occupational exposure limit values.

Engineering measures

Install a closed system or local exhaust.
Also install safety shower and eye bath.

Personal protective equipment

Respiratory protection

Gas mask

Eye/face protection

Safety glasses
Face-shield

Skin and body protection

Protective suit

Hand protection

Protective gloves *Use personal protective equipment(PPE) approved under appropriate government standards and follow local and national regulations.

SECTION 9: Physical and chemical properties

Information on basic physicochemical properties

Physical stateclear liquid
Viscosity, dynamicNo data available
Viscosity, kinematicNo data available
Molecular weight152.19 g/mol
Decomposition temperatureNo data available
Autoignition temperatureNo data available
Partition coefficient: n-octanol/water (log value)No data available
Solubility in other solventsNo data available
Water solubilityNo data available
Relative density1.07
Vapor pressureNo data available
Lower explosion limit / Lower flammability limitNo data available
Upper explosion limit / Upper flammability limitNo data available
FlammabilityNo data available
Evaporation rateNo data available
Flash pointNo data available
Boiling point/boiling range244 °C
Melting point/freezing pointNo data available
pHNo data available
Odor ThresholdNo data available
OdorNo data available
Colorcolorless - yellow
Appearanceliquid

SECTION 10: Stability and reactivity

Reactivity

No data available

Chemical stability

Stable under normal conditions.

Possibility of hazardous reactions

None under normal processing.

Incompatible materials

Oxidizing agents

Hazardous decomposition products

Carbon monoxide, Carbon dioxide (CO2)

SECTION 11: Toxicological information

Acute toxicity

Product

Acute oral toxicity

Assessment: The component/mixture is minimally toxic after single ingestion.

Components

2-Phenoxypropanol

Acute oral toxicity

LD50 (Rat): 2,830 mg/kg Assessment: The component/mixture is minimally toxic after single ingestion.