| HEALTH | 2 | Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury (e.g. diethyl ether, ammonium phosphate, iodine) | |
| FIRE | 0 | Materials that will not burn under typical fire conditions, including intrinsically noncombustible materials such as concrete, stone, and sand. Materials that will not burn in air when exposed to a temperature of 820 °C (1,500 °F) for a period of 5 minutes.(e.g. Carbon tetrachloride) | |
| REACT | 0 | Normally stable, even under fire exposure conditions, and is not reactive with water (e.g. helium,N2) | |
| SPEC. HAZ. |
| Chemical Name | ACGIH TLV | OSHA PEL | NIOSH IDLH |
|---|---|---|---|
| Copper(I) telluride 12019-52-2 | TWA: 1 mg/m3 Cu dust and mist TWA: 0.1 mg/m3 Te except Hydrogen telluride and tellurium hexafluoride | TWA: 0.1 mg/m3 Te (vacated) TWA: 0.1 mg/m3 Te | IDLH: 100 mg/m3 Cu dust and mist IDLH: 25 mg/m3 Te TWA: 1 mg/m3 Cu dust and mist TWA: 0.1 mg/m3 except Tellurium hexafluoride and Bismuth telluride Te |
| Chemical Name | California Hazardous Waste Status |
|---|---|
| Copper(I) telluride 12019-52-2 | Toxic |
| Chemical name | TSCA | DSL | NDSL | EINECS | ELINCS | ENCS | IECSC | KECL | PICCS | AICS |
|---|---|---|---|---|---|---|---|---|---|---|
| Copper(I) telluride | X | - | X | X | - | - | - | X | - | - |
| Chemical Name | CWA - Reportable Quantities | CWA - Toxic Pollutants | CWA - Priority Pollutants | CWA - Hazardous Substances |
|---|---|---|---|---|
| Copper(I) telluride 12019-52-2 | X |
| Chemical Name | New Jersey | Massachusetts | Pennsylvania |
|---|---|---|---|
| Copper(I) telluride 12019-52-2 | X | Not Listed | X |
The information in this MSDS is only applicable to the specified product, unless otherwise specified, it is not applicable to the mixture of this product and other substances. This MSDS only provides information on the safety of the product for those who have received the appropriate professional training for the user of the product. Users of this MSDS must make independent judgments on the applicability of this SDS. The authors of this MSDS will not be held responsible for any harm caused by the use of this MSDS.