Chemical Safety Data Sheet MSDS / SDS

Methylene dithiocyanate

Revision Date:2026-08-01Revision Number:1

SECTION 1: Identification of the substance/mixture and of the company/undertaking

Product identifier

Product name: Methylene dithiocyanate
CBnumber: CB6360991
CAS: 6317-18-6
EINECS Number: 228-652-3
Synonyms: mbt,Methylene dithiocyanate

Relevant identified uses of the substance or mixture and uses advised against

Relevant identified uses: For R&D use only. Not for medicinal, household or other use.
Uses advised against: none

Company Identification

Company: Chemicalbook
Address: Building 1, Huihuang International, Shangdi 10th Street, Haidian District, Beijing
Telephone: 010-86108875

SECTION 2: Hazards identification

GHS Label elements, including precautionary statements

Symbol(GHS)

Signal wordDanger

Precautionary statements

P260 Do not breathe dust/fume/gas/mist/vapours/spray.

P262 Do not get in eyes, on skin, or on clothing.

P264 Wash skin thouroughly after handling.

P270 Do not eat, drink or smoke when using this product.

P272 Contaminated work clothing should not be allowed out of the workplace.

P273 Avoid release to the environment.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P391 Collect spillage. Hazardous to the aquatic environment

P405 Store locked up.

P501 Dispose of contents/container to..…

P303+P361+P353 IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P304+P340 IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P320 Specific treatment is urgent (see … on this label).

Hazard statements

H301 Toxic if swalloed

H310 Fatal in contact with skin

H314 Causes severe skin burns and eye damage

H317 May cause an allergic skin reaction

H400 Very toxic to aquatic life

H330 Fatal if inhaled

SECTION 3: Composition/information on ingredients

Substance

Product name: Methylene dithiocyanate
Synonyms: mbt,Methylene dithiocyanate
CAS: 6317-18-6
EC number: 228-652-3
MF: C3H2N2S2
MW: 130.18

SECTION 4: First aid measures

First Aid Measures

General advice

Immediate medical attention is required.

Eye contact

Immediate medical attention is required. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing.

Skin Contact

Wash off immediately with soap and plenty of water. Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.

Inhalation

Remove to fresh air If not breathing, give artificial respiration If breathing is difficult, give oxygen Call a physician or poison control center immediately

Ingestion

Immediate medical attention is required. Remove from exposure, lie down. Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Call a physician or poison control cente immediately.

Most important symptoms and effects, both acute and delayed

Symptoms

No information available.

Indication of any immediate medical attention and special treatment needed

Note to physicians

Treat symptomatically.

SECTION 5: Firefighting measures

Suitable Extinguishing Media

Suitable Extinguishing Media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable Extinguishing Media

No information available.

Specific hazards arising from the chemical

Specific hazards arising from the chemical

Thermal decomposition can lead to release of irritating and toxic gases and vapors. In the event of fire and/or explosion do not breathe fumes.

Hazardous combustion products

Carbon oxides. Hydrogen cyanide. Nitrogen oxides (NOx). Hydrogen sulfide.

Explosion data

Sensitivity to Mechanical Impact

No information available.

Sensitivity to Static Discharge

No information available.

Protective equipment and precautions for firefighters

Protective equipment and precautions for firefighters

As in any fire, wear self contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

NFPA 704

HEALTH	4	Very short exposure could cause death or major residual injury (e.g. hydrogen cyanide, phosgene, methyl isocyanate, hydrofluoric acid)
FIRE	1	Materials that require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Includes some finely divided suspended solids that do not require heating before ignition can occur. Flash point at or above 93.3 °C (200 °F). (e.g. mineral oil, ammonia)
REACT	0	Normally stable, even under fire exposure conditions, and is not reactive with water (e.g. helium,N2)
SPEC. HAZ.

SECTION 6: Accidental release measures

Personal precautions, protective equipment and emergency procedures

Personal precautions

Use personal protective equipment as required. Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak.

Environmental precautions

Environmental precautions

See Section 12 for additional Ecological Information. Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. Prevent product from entering drains.

Methods and material for containment and cleaning up

Methods for containment

Prevent further leakage or spillage if safe to do so.

Methods for cleaning up

Use personal protective equipment as required. Take up mechanically, placing in appropriate containers for disposal. Clean contaminated surface thoroughly. Cover powde spill with plastic sheet or tarp to minimize spreading and keep powder dry. Avoid creating dust. Soak up with inert absorbent material. Dam up. After cleaning, flush away traces with water.

SECTION 7: Handling and storage

Precautions for safe handling

Advice on safe handling

Avoid contact with skin and eyes. In case of insufficient ventilation, wear suitable respiratory equipment. Use only with adequate ventilation and in closed systems.

Conditions for safe storage, including any incompatibilities

Storage Conditions

Protect from moisture. Keep containers tightly closed in a cool, well-ventilated place. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep in properly labeled containers. Store at room temperature.

Incompatible materials

Incompatible with strong acids and bases. Incompatible with oxidizing agents.

SECTION 8: Exposure controls/personal protection

Control parameters

Exposure Guidelines

This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies.

Appropriate engineering controls

Engineering Controls

Showers
Eyewash stations
Ventilation systems

Individual protection measures, such as personal protective equipment

Eye/face protection

Tight sealing safety goggles. Face protection shield.

Skin and Body Protection

Wear protective gloves and protective clothing.

Respiratory protection

If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Positive-pressure supplied air respirators may be required for high airborne contaminant concentrations. Respiratory protection must be provided in accordance with current local regulations.

General Hygiene Considerations

Keep away from food, drink and animal feeding stuffs. When using do not eat, drink or smoke. Contaminated work clothing should not be allowed out of the workplace. Regula cleaning of equipment, work area and clothing is recommended. Avoid contact with skin, eyes or clothing. Take off all contaminated clothing and wash it before reuse. Wear suitable gloves and eye/face protection.

SECTION 9: Physical and chemical properties

Information on basic physicochemical properties

Physical StateSolid
AppearanceNo information available
OdorNo information available
pHNo information available
Melting point/freezing point102 °C
Boiling point285.2±23.0 °C(Predicted)
Flash point110 °C
Liquid DensityNo information available
Evaporation rateNo information available
Upper flammability limitsNo information available
Lower flammability limitNo information available
Vapor pressureNo information available
Vapor densityNo information available
Specific gravityNo information available
Water solubilityDecomposes in water. Slightly soluble in organic solvents.
Solubility in other solventsNo information available
Partition coefficientNo information available
Autoignition temperatureNo information available
Decomposition temperatureNo information available
Kinematic viscosityNo information available
Explosive propertiesNo information available
Oxidizing propertiesNo information available
Density and/or relative density1.492 (estimate)
Solubilityvery slightly in Methanol
ColourWhite to Light yellow to Light orange

SECTION 10: Stability and reactivity

Reactivity

Not applicable

Chemical stability

Stable under recommended storage conditions.

Possibility of Hazardous Reactions

Contact with acids may liberate toxic gas.

Hazardous polymerization

No information available.

Conditions to avoid

Exposure to air or moisture over prolonged periods.

Incompatible materials

Incompatible with strong acids and bases. Incompatible with oxidizing agents.

Hazardous Decomposition Products

Carbon oxides. Hydrogen cyanide. Nitrogen oxides (NOx). Hydrogen sulfide. Thermal decomposition can lead to release of irritating and toxic gases and vapors.