Chemical Safety Data Sheet MSDS / SDS
β-Lonone
Revision Date:2026-03-22Revision Number:1
Product identifier
- Product name: β-Lonone
- CBnumber: CB6456520
- CAS: 79-77-6
- EINECS Number: 201-224-3
- Synonyms: beta-Ionone;B-IONONE
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses: For R&D use only. Not for medicinal, household or other use.
- Uses advised against: none
Company Identification
- Company: Chemicalbook
- Address: Building 1, Huihuang International, Shangdi 10th Street, Haidian District, Beijing
- Telephone: 010-86108875
GHS Label elements, including precautionary statements
-
Symbol(GHS)
- Signal wordWarning
P501 Dispose of contents/container to..…
P391 Collect spillage. Hazardous to the aquatic environment
P273 Avoid release to the environment.
Hazard statements
H411 Toxic to aquatic life with long lasting effects
Substance
- Product name: β-Lonone
- Synonyms: beta-ionone,oil
- CAS: 79-77-6
- EC number: 201-224-3
- MF: C13H20O
- MW: 192.3
4.1 Description of first-aid measures
General adviceShow this material safety data sheet to the doctor in attendance.
If inhaled
After inhalation: fresh air.
In case of skin contact
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
In case of eye contact
After eye contact: rinse out with plenty of water. Remove contact lenses.
If swallowed
After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
5.1 Extinguishing media
Suitable extinguishing mediaFoam Carbon dioxide (CO2) Dry powder
Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.
5.2 Special hazards arising from the substance or mixture
Carbon oxides
Combustible.
Development of hazardous combustion gases or vapours possible in the event of fire.
Combustible.
Development of hazardous combustion gases or vapours possible in the event of fire.
5.3 Advice for firefighters
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
5.4 Further information
Prevent fire extinguishing water from contaminating surface water or the ground water system.
NFPA 704
0
| HEALTH | |||
| FIRE | 0 | Materials that will not burn under typical fire conditions, including intrinsically noncombustible materials such as concrete, stone, and sand. Materials that will not burn in air when exposed to a temperature of 820 °C (1,500 °F) for a period of 5 minutes.(e.g. Carbon tetrachloride) | |
| REACT | |||
| SPEC. HAZ. |
6.1 Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
For personal protection see section 8.
For personal protection see section 8.
6.2 Environmental precautions
Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ).
Dispose of properly. Clean up affected area.
Dispose of properly. Clean up affected area.
6.4 Reference to other sections
For disposal see section 13.
7.1 Precautions for safe handling
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Storage conditionsTightly closed.
Storage class
Storage class (TRGS 510): 10: Combustible liquids
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
8.1 Control parameters
Ingredients with workplace control parameters8.2 Exposure controls
Personal protective equipmentEye/face protection
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
Skin protection
required
Body Protection
protective clothing
Respiratory protection
required when vapours/aerosols are generated.
Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.
Recommended Filter type: Filter type ABEK
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer.
These measures have to be properly documented.
Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.
Recommended Filter type: Filter type ABEK
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer.
These measures have to be properly documented.
Control of environmental exposure
Do not let product enter drains.
Information on basic physicochemical properties
- a) Physical stateliquid
- b) ColorClear Colorless to Light Yellow
- c) Odorat 10.00 % in dipropylene glycol. dry powdery floral woody orris berry seedy
- d) Melting point/freezing pointNo data available
- e) Initial boiling point and boiling range126 - 128 °C at 16 hPa 266 - 269 °C at 1.013 hPa
- f) Flammability (solid, gas)No data available
- g) Upper/lower flammability or explosive limitsNo data available
- h) Flash point> 113 °C - closed cup
- i) Autoignition temperatureNo data available
- j) Decomposition temperatureNo data available
- k) pH5,67 at 24 °C (as aqueous solution)
- l) ViscosityViscosity, kinematic: No data available
Viscosity, dynamic: No data available - m) Water solubility10.000 g/l at 27 °C
- n) Partition coefficient n-octanol/waterlog Pow: 1,90 at 27 °C - (Lit.), Bioaccumulation is not expected.
- o) Vapor pressure<1 hPa (25 °C)
- p) Density0,945 g/cm3
- Relative density0.945 g/mL at 25 °C(lit.)
- q) Relative vapor densityNo data available
- r) Particle characteristicsNo data available
- s) Explosive propertiesNo data available
- t) Oxidizing propertiesnone
- Solubility0.11g/l insoluble
- Dielectric constant12.0（20℃）
9.2 Other safety information
No data available
10.1 Reactivity
No data available
10.2 Chemical stability
The product is chemically stable under standard ambient conditions (room temperature) .
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
no information available
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
In the event of fire: see section 5
11.1 Information on toxicological effects
Acute toxicityLD50 Oral - Rat - 4.590 mg/kg
Remarks: (RTECS)
Inhalation: No data available
Dermal: No data available
LD50 Intraperitoneal - Mouse - 2.277 mg/kg
Skin corrosion/irritation
Remarks: (RTECS)
Inhalation: No data available
Dermal: No data available
LD50 Intraperitoneal - Mouse - 2.277 mg/kg
Remarks: No data available
Serious eye damage/eye irritation
Remarks: No data available
Respiratory or skin sensitization
Prolonged or repeated exposure may cause allergic reactions in certain sensitive individuals. The preceding data, or interpretation of data, was determined using
Quantitative Structure Activity Relationship (QSAR) modeling.
Germ cell mutagenicity
Quantitative Structure Activity Relationship (QSAR) modeling.
Test Type: Ames test
Test system: Escherichia coli/Salmonella typhimurium
Metabolic activation: with and without metabolic activation
Result: negative
Remarks: (Lit.)
Carcinogenicity
Test system: Escherichia coli/Salmonella typhimurium
Metabolic activation: with and without metabolic activation
Result: negative
Remarks: (Lit.)
Classified based on available data. For more details, see section 2
Reproductive toxicity
Classified based on available data. For more details, see section 2
Specific target organ toxicity - single exposure
Classified based on available data. For more details, see section 2
Specific target organ toxicity - repeated exposure
Classified based on available data. For more details, see section 2
Aspiration hazard
Classified based on available data. For more details, see section 2
11.2 Additional Information
Endocrine disrupting propertiesProduct:
Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
12.1 Toxicity
Toxicity to fish LC50 - Pimephales promelas (fathead minnow) - 4,7 - 5,4 mg/l - 96 h
Remarks: (Lit.)
Remarks: (Lit.)
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Endocrine disrupting properties
Product:
Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission
Delegated regulation (EU) 2017/2100 or Commission
Regulation (EU) 2018/605 at levels of 0.1% or higher.
Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission
Delegated regulation (EU) 2017/2100 or Commission
Regulation (EU) 2018/605 at levels of 0.1% or higher.
12.7 Other adverse effects
No data available
14.1 UN number
ADR/RID: 3082
IMDG: 3082
IATA: 3082
IMDG: 3082
IATA: 3082
14.2 UN proper shipping name
ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (4-(2,6,6- trimethylcyclohex-1-ene-1-yl)-but-3-ene-2-one)
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (4-(2,6,6- trimethylcyclohex-1-ene-1-yl)-but-3-ene-2-one)
IATA: Environmentally hazardous substance, liquid, n.o.s. (4-(2,6,6-trimethylcyclohex- 1-ene-1-yl)-but-3-ene-2-one)
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (4-(2,6,6- trimethylcyclohex-1-ene-1-yl)-but-3-ene-2-one)
IATA: Environmentally hazardous substance, liquid, n.o.s. (4-(2,6,6-trimethylcyclohex- 1-ene-1-yl)-but-3-ene-2-one)
14.3 Transport hazard class(es)
ADR/RID: 9
IMDG: 9
IATA: 9
IMDG: 9
IATA: 9
14.4 Packaging group
ADR/RID: III
IMDG: III
IATA: III
IMDG: III
IATA: III
14.5 Environmental hazards
ADR/RID: yes
IMDG Marine pollutant: yes
IATA: yes
IMDG Marine pollutant: yes
IATA: yes
14.6 Special precautions for user
Tunnel restriction code : (-)
Further information: EHS-Mark required (ADR 2.2.9.1.10, IMDG code 2.10.3) for single packagings and combination packagings containing inner packagings with Dangerous Goods > 5L for liquids or > 5kg for solids.Packages smaller than or equal to 5 kg / L , not dangerous goods of
Class 9
Further information: EHS-Mark required (ADR 2.2.9.1.10, IMDG code 2.10.3) for single packagings and combination packagings containing inner packagings with Dangerous Goods > 5L for liquids or > 5kg for solids.Packages smaller than or equal to 5 kg / L , not dangerous goods of
Class 9
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
This material safety data sheet complies with the requirements of Regulation (EC) No.
1907/2006.
National legislation
Seveso III: Directive 2012/18/EU of the E2 ENVIRONMENTAL HAZARDS
European Parliament and of the Council on the control of major-accident hazards involving dangerous substances.
Other regulations
Take note of Dir 94/33/EC on the protection of young people at work.
1907/2006.
National legislation
Seveso III: Directive 2012/18/EU of the E2 ENVIRONMENTAL HAZARDS
European Parliament and of the Council on the control of major-accident hazards involving dangerous substances.
Other regulations
Take note of Dir 94/33/EC on the protection of young people at work.
15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
Full text of other abbreviations
ADN - European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR - Agreement concerning the International Carriage ofDangerous Goods by Road
AIIC - Australian Inventory of Industrial Chemicals
ASTM -American Society for the Testing of Materials
bw - Body weight
CMR - Carcinogen,Mutagen or Reproductive Toxicant
DIN - Standard of the German Institute forStandardisation
DSL - Domestic Substances List (Canada)
ECx - Concentration associated with x% response
ELx - Loading rate associated with x% response
EmS -Emergency Schedule
ENCS - Existing and New Chemical Substances (Japan)
ErCx -Concentration associated with x% growth rate response
GHS - Globally HarmonizedSystem
GLP - Good Laboratory Practice
IARC - International Agency for Research onCancer
IATA - International Air Transport Association
IBC - International Code for theConstruction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IC50 - Half maximal inhibitory concentration
ICAO - International Civil Aviation Organization
IECSC - Inventory of Existing Chemical Substances in China
IMDG - InternationalMaritime Dangerous Goods
IMO - International Maritime Organization
ISHL - IndustrialSafety and Health Law (Japan)
ISO - International Organisation for Standardization
KECI - Korea Existing Chemicals Inventory
LC50 - Lethal Concentration to 50 % of a test population
LD50 - Lethal Dose to 50% of a test population (Median Lethal Dose)
MARPOL - International Convention for the Prevention of Pollution from Ships
n.o.s. -Not Otherwise Specified
NO(A)EC - No Observed (Adverse) Effect Concentration
NO(A)EL - No Observed (Adverse) Effect Level
NOELR - No Observable Effect LoadingRate
NZIoC - New Zealand Inventory of Chemicals
OECD - Organization for EconomicCo-operation and Development
OPPTS - Office of Chemical Safety and PollutionPrevention
PBT - Persistent, Bioaccumulative and Toxic substance
PICCS - PhilippinesInventory of Chemicals and Chemical Substances
(Q)SAR - (Quantitative) StructureActivity Relationship
REACH - Regulation (EC) No 1907/2006 of the EuropeanParliament and of the Council concerning the Registration, Evaluation, Authorisation andRestriction of Chemicals
RID - Regulations concerning the International Carriage ofDangerous Goods by Rail
SADT - Self-Accelerating Decomposition Temperature
SDS -Safety Data Sheet
TCSI - Taiwan Chemical Substance Inventory
TECI - ThailandExisting Chemicals Inventory
TSCA - Toxic Substances Control Act (United States)
UN - United Nations
UNRTDG - United Nations Recommendations on the Transport ofDangerous Goods
vPvB - Very Persistent and Very Bioaccumulative
ADR - Agreement concerning the International Carriage ofDangerous Goods by Road
AIIC - Australian Inventory of Industrial Chemicals
ASTM -American Society for the Testing of Materials
bw - Body weight
CMR - Carcinogen,Mutagen or Reproductive Toxicant
DIN - Standard of the German Institute forStandardisation
DSL - Domestic Substances List (Canada)
ECx - Concentration associated with x% response
ELx - Loading rate associated with x% response
EmS -Emergency Schedule
ENCS - Existing and New Chemical Substances (Japan)
ErCx -Concentration associated with x% growth rate response
GHS - Globally HarmonizedSystem
GLP - Good Laboratory Practice
IARC - International Agency for Research onCancer
IATA - International Air Transport Association
IBC - International Code for theConstruction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IC50 - Half maximal inhibitory concentration
ICAO - International Civil Aviation Organization
IECSC - Inventory of Existing Chemical Substances in China
IMDG - InternationalMaritime Dangerous Goods
IMO - International Maritime Organization
ISHL - IndustrialSafety and Health Law (Japan)
ISO - International Organisation for Standardization
KECI - Korea Existing Chemicals Inventory
LC50 - Lethal Concentration to 50 % of a test population
LD50 - Lethal Dose to 50% of a test population (Median Lethal Dose)
MARPOL - International Convention for the Prevention of Pollution from Ships
n.o.s. -Not Otherwise Specified
NO(A)EC - No Observed (Adverse) Effect Concentration
NO(A)EL - No Observed (Adverse) Effect Level
NOELR - No Observable Effect LoadingRate
NZIoC - New Zealand Inventory of Chemicals
OECD - Organization for EconomicCo-operation and Development
OPPTS - Office of Chemical Safety and PollutionPrevention
PBT - Persistent, Bioaccumulative and Toxic substance
PICCS - PhilippinesInventory of Chemicals and Chemical Substances
(Q)SAR - (Quantitative) StructureActivity Relationship
REACH - Regulation (EC) No 1907/2006 of the EuropeanParliament and of the Council concerning the Registration, Evaluation, Authorisation andRestriction of Chemicals
RID - Regulations concerning the International Carriage ofDangerous Goods by Rail
SADT - Self-Accelerating Decomposition Temperature
SDS -Safety Data Sheet
TCSI - Taiwan Chemical Substance Inventory
TECI - ThailandExisting Chemicals Inventory
TSCA - Toxic Substances Control Act (United States)
UN - United Nations
UNRTDG - United Nations Recommendations on the Transport ofDangerous Goods
vPvB - Very Persistent and Very Bioaccumulative
Disclaimer:
The information in this MSDS is only applicable to the specified product, unless otherwise specified, it is not applicable to the mixture of this product and other substances. This MSDS only provides information on the safety of the product for those who have received the appropriate professional training for the user of the product. Users of this MSDS must make independent judgments on the applicability of this SDS. The authors of this MSDS will not be held responsible for any harm caused by the use of this MSDS.