| Identification | More | [Name]
Sodium peroxide | [CAS]
1313-60-6 | [Synonyms]
DI-SODIUM PEROXIDE
SODIUM DIOXIDE
SODIUM PEROXIDE
Disodium dioxide
disodiumdioxide
Flocool 180
flocool180[qr]
Na2-(O2)
Oxolin
Oxygen powder
Sodium peroxide (Na2(O2))
sodiumdioxide[qr]
sodiumoxide(na2o2)
sodiumoxide,per-[qr]
sodiumperoxide(na2(o2))
sodiumperoxide[na2(o2)]
Solozone
solozone[qr]
flocool
Sodium binoxide | [EINECS(EC#)]
215-209-4 | [Molecular Formula]
Na2O2 | [MDL Number]
MFCD00003497 | [Molecular Weight]
77.98 | [MOL File]
1313-60-6.mol |
| Chemical Properties | Back Directory | [Definition]
Exists as impurity
(about 10%) in sodium peroxide, obtained by heat-
ing sodium peroxide in oxygen, reacts with water
to yield hydrogen peroxide, oxygen, and sodium
hydroxide.
| [Appearance]
light yellow granular powder | [Melting point ]
460 °C (dec.)(lit.) | [Boiling point ]
657°C | [density ]
2.8
| [vapor pressure ]
0.001Pa at 20℃ | [Fp ]
657°C | [storage temp. ]
Store at +15°C to +25°C. | [solubility ]
Soluble in acid. Insoluble in alkali. | [form ]
beads (small)
| [color ]
Yellow | [Specific Gravity]
2.805 | [Odor]
Odorless | [PH]
12.8 (100g/l, H2O, 20℃) | [PH Range]
12.8 | [Stability:]
Reacts violently with water. Contact with combustible materials may cause fire or explosion. Incompatible with strong oxidizing agents, alcohols, organic materials, acids, powdered metals. Absorbs carbon dioxide from the air. | [Water Solubility ]
Soluble in water, forming NaOH and H{2}O{2}. Soluble in acid. Insoluble in alkali. | [Sensitive ]
Air Sensitive & Hygroscopic | [Merck ]
14,8655 | [Dielectric constant]
2.7（Ambient） | [CAS DataBase Reference]
1313-60-6(CAS DataBase Reference) | [EPA Substance Registry System]
Sodium peroxide (1313-60-6) |
| Safety Data | Back Directory | [Hazard Codes ]
O,C | [Risk Statements ]
R8:Contact with combustible material may cause fire.
R35:Causes severe burns. | [Safety Statements ]
S8:Keep container dry .
S27:Take off immediately all contaminated clothing .
S39:Wear eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) . | [RIDADR ]
UN 1504 5.1/PG 1
| [WGK Germany ]
1
| [RTECS ]
WD3450000 | [F ]
3-9-23 | [TSCA ]
Yes | [HazardClass ]
5.1 | [PackingGroup ]
I | [HS Code ]
28153000 | [Safety Profile]
A severe irritant to shin, eyes, and mucous membranes. Dangerous fire hazard by chemical reaction; a powerfuloxidizing agent. Reacts explosively or violently under the appropriate conditions with water, acids, powdered metals, acetic acid, acetic anhydride, Al, (Al + CO2), aluminum + aluminum chloride, almond oil, (NH4)2S208, aniline, Sb, As, benzene, boron nitride, calcium aceqlide, charcoal, Cu, cotton wool, (KNO3 + dextrose), diethyl ether, fibrous materials + water, glucose + potassium nitrate, hexamethylene-tetramine, hydrogen sulfide, hydroxy compounds (e.g., ethanol, ethylene glycol, glycerol, sugar), magnesium, (Mg + CO2), MnO2, metals, metals + carbon dioxide + water, nonmetals (e.g., carbon, phosphorus, antimony, arsenic, boron, sulfur, selenium), nonmetal halides (e.g., diselenium dichloride, disulfur dichloride, phosphorus trichloride), organic matter, paraffin, K, silver chloride + charcoal, soap, Na, sodium dioxide, SCl, Sn, Zn, wood, peroxyformic acid, reducing materials. Will react with water or steam to produce heat and toxic fumes. To fight fire, use carbon dioxide or dry chemical. Combustible materials ignited by contact with sodium peroxide should be smothered with soda ash, salt or dolomite mixtures. Chemical fire extinguishers should not be used. If the fire cannot be smothered, it should be flooded with large quantities of water from a hose. When heated to decomposition it emits toxic fumes of Na2O. See also SODIUM HYDROXIDE and PEROXIDES, INORGANIC. | [Hazardous Substances Data]
1313-60-6(Hazardous Substances Data) |
| Hazard Information | Back Directory | [General Description]
A yellow-white to yellow granular solid. Mixtures with combustible material are readily ignited by friction, heat, or contact with moisture. May vigorously decompose under prolonged exposure to heat, causing the rupture of the containers. | [Reactivity Profile]
SODIUM PEROXIDE(1313-60-6) reacts violently with reducing agents, combustible materials and light metals. Reacts exothermically and rapidly or even explosively with water to form a strong base (NaOH) and oxygen (O2) [Handling Chemicals Safely 1980 p. 854]. A mixture with ammonium persulfate can explode if subjected to friction (crushing in a mortar), if heated, or if a stream of gaseous carbon dioxide is passed over SODIUM PEROXIDE(1313-60-6) [Mellor 10:464 1946-47]. Reacts very vigorously with gaseous hydrogen sulfide; even in the absence of air, the reaction may be accompanied by flame [Mellor 10:132 1946-47]. An explosion results when gaseous carbon dioxide is passed over a mixture of SODIUM PEROXIDE(1313-60-6) with powdered magnesium [Mellor 2:490 1946-47] . Mixtures with acetic acid or acetic anhydride can explode if not kept cold [Von Schwartz 1918 p. 321]. Spontaneously flammable in contact with aniline, benzene, diethyl ether, or organic materials such as paper and wood. Mixtures with charcoal, glycerine, certain oils, and phosphorus burn or explode [Mellor 2:490 1946-47]. A mixture with calcium carbide (powdered) burst into flame when exposed to damp air and exploded when heated [Mellor 2:490 1946-47]. Decomposes, often violently in the presence of catalytic quantities of manganese dioxide [Mellor 2 Supp. 2:635 1961]. Mixing with sulfur monochloride leads to a violent reaction [Mellor 2 Supp. 2:634 1961]. Can react with and cause the ignition of fuels. | [Air & Water Reactions]
Reacts vigorously with water, large amounts react explosively [Haz. Chem. Data 1969. p. 201]. | [Hazard]
Dangerous fire and explosion risk in contact
with water, alcohols, acids, powdered metals, and
organic materials. Strong oxidizing agent. Keep dry.
Irritant. | [Health Hazard]
TOXIC; inhalation or contact with vapor, substance, or decomposition products may cause severe injury or death. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may cause pollution. | [Fire Hazard]
May ignite combustibles (wood, paper, oil, clothing, etc.). React vigorously and/or explosively with water. Produce toxic and/or corrosive substances on contact with water. Flammable/toxic gases may accumulate in tanks and hopper cars. Some may produce flammable hydrogen gas upon contact with metals. Containers may explode when heated. Runoff may create fire or explosion hazard. | [Description]
Sodium peroxide has a molecular formula of Na2O2 and is an inorganic peroxide salt. It is a yellowish-white powder that turns yellow when heated. Sodium peroxide absorbs water and carbon dioxide from the air and is soluble in cold water. It is a strong oxidizing agent, is corrosive and can cause burns to the eyes and skin, and is also toxic by ingestion and inhalation. Sodium peroxide is water reactive and a dangerous fire and explosion risk in contact with water, alcohol, or acids. Sodium peroxide forms self-igniting mixtures with powdered metals and organic materials. It is incompatible with ethyl or methyl alcohol, glacial acetic acid, carbon disulfide, glycerin, ethylene glycol, and ethyl acetate. The four-digit UN identification number is 1504. The NFPA 704 designation is health 3, flammability 0, and reactivity 1. The 704 diamond has the prefix “oxy” in the white space at the bottom. It is used as bleach and as an oxygen-generating material for diving bells and submarines. | [Chemical Properties]
Sodium peroxide, Na202, is a fire-hazardous white powder that yellows when heated and causes ignition when in contact with water. Sodium peroxide is decomposed by heating, although this is not easily accomplished. It is stable in dry air; however, in moist air,or when acted on by water, it decomposes readily. It can be a powerful oxidizer and a powerful reducing agent, depending on conditions. Sodium peroxide is also used as a bleach, in medicine soap, and in the decomposition of minerals.
| [Chemical Properties]
Sodium peroxide, Na2O2, is a pale yellow solid, stable at ambient temperature, and hygroscopic. On heating, it starts to liberate oxygen at about 300 °C and decomposes rapidly above its melting point of 460 °C. | [Uses]
As an oxidizing agent, a bleaching agent, deodorant, pharmaceuticals and dyes, and as an analytical reagent.Sodium peroxide acts as a bleaching agent in laundry and wood pulp. It finds application in the extraction of minerals from various ores. It acts as an oxidizing agent as well as an oxygen source by reacting with carbon dioxide. Furthermore, it is used as a deodorant and an analytical reagent. It is also useful in scuba gear and in submarines. | [Uses]
Bleaching animal and vegetable fibers, feathers, bones, ivory, wood, wax, sponges, coral; rendering air charged with CO2 respirable as in torpedo boats, submarines, diving bells, etc.; purifying air in sick rooms; dyeing and printing textiles; chemical analysis. General oxidizing agent. | [Uses]
Sodium peroxide historically was used to bleach wood pulp
for the production of paper and textiles. It is mainly used for
specialized laboratory operations, for example, the extraction
of minerals from various ores. Sodium peroxide is used
as an oxidizing agent and is used as an oxygen source by
reacting with carbon dioxide to produce oxygen and sodium
carbonate; it is thus particularly useful in scuba gear, submarines,
and so on. | [Flammability and Explosibility]
Notclassified |
| Questions And Answer | Back Directory | [Preparation]
Although sodium peroxide, Na202, is the principal product of the combustion of sodium, sodium monoxide is prepared commercially by carefully permitting sodium to react with a limited amount of oxygen according to the equation 
If the sodium monoxide thus prepared is exposed to further dry oxygen or air, it is oxidized to the peroxide; this is the commercial method of preparing Na202 , the most important alkali peroxide,
|
|