| Identification | More | [Name]
LEAD TELLURIDE | [CAS]
1314-91-6 | [Synonyms]
LEAD(II) TELLURIDE
LEAD TELLURIDE
Lead telluride (PbTe)
PbTe
plumbous telluride
LEAD(II) TELLURIDE, 99.998%
Lead(Ii)Telluride99.999%
Lead(II) telluride,-60 mesh, 99.99%
Lead(II)telluride,99%(99.9+%-Pb)
TELLURICACID,LEAD(2+)SALT
Lead(II) telluride, 99.999% (metals basis)
Lead(II) telluride, 99.99% (metals basis)
LEAD TELLURIDE, 99.99%
Altaite | [EINECS(EC#)]
215-247-1 | [Molecular Formula]
PbTe | [MDL Number]
MFCD00016274 | [Molecular Weight]
334.8 | [MOL File]
1314-91-6.mol |
| Chemical Properties | Back Directory | [Appearance]
irregular chunks with metal lustre | [Melting point ]
905 °C | [density ]
8,164 g/cm3 | [solubility ]
insoluble in H2O, acid solutions | [form ]
Powder | [color ]
Gray | [Specific Gravity]
8.164 | [Water Solubility ]
Insoluble in water. | [Crystal Structure]
Cubic, Halite Structure - Space Group Fm3m | [Merck ]
14,5422 | [Exposure limits]
ACGIH: TWA 0.05 mg/m3; TWA 0.1 mg/m3
NIOSH: IDLH 25 mg/m3; IDLH 100 mg/m3; TWA 0.1 mg/m3; TWA 0.050 mg/m3 | [CAS DataBase Reference]
1314-91-6(CAS DataBase Reference) | [EPA Substance Registry System]
Lead(II) telluride (1314-91-6) |
| Safety Data | Back Directory | [Hazard Codes ]
N-T,N,T | [Risk Statements ]
R62:Possible risk of impaired fertility.
R61:May cause harm to the unborn child.
R50/53:Very Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment .
R33:Danger of cumulative effects.
R20/22:Harmful by inhalation and if swallowed . | [Safety Statements ]
S61:Avoid release to the environment. Refer to special instructions safety data sheet .
S60:This material and/or its container must be disposed of as hazardous waste .
S53:Avoid exposure-obtain special instruction before use .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) . | [RIDADR ]
3284 | [WGK Germany ]
3 | [TSCA ]
Yes | [HazardClass ]
6.1 | [PackingGroup ]
III | [HS Code ]
28429010 |
| Hazard Information | Back Directory | [Chemical Properties]
irregular chunks with metal lustre | [Chemical Properties]
Lead telluride, PbTe, forms white cubic crystals, sp gr 8.16, and has a hardness of 3 on the Mohs’ scale. It is very slightly soluble in water, melts at 917 °C, and is prepared by melting lead and tellurium together. Lead telluride has semiconductive and photoconductive properties. | [Uses]
In photoconductor cells; in semiconductor research. | [Uses]
In semiconductor research, photoconductor cellsLead(II) telluride is used as an infrared detector material. It is also used in spacecraft power applications. Further, it is used in infrared detection, imaging and in solar cells. In addition, it acts as a semiconductor and photoconductor in the form of single crystals. | [Uses]
Lead telluride is used in pyrometry, in heat-sensing instruments such as bolometers and infrared spectroscopes, and in thermoelectric elements to convert heat directly to electricity. Lead telluride is also used in catalysts for oxygen reduction in fuel cells, as cathodes in primary batteries with lithium anodes, in electrical contacts for vacuum switches, in lead-ion selective electrodes, in tunable lasers, and in thermistors. | [General Description]
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here. | [Structure and conformation]
The space lattice of PbTe belongs to the cubic system, and its rock salt structure has a lattice
constant of a=0.317 nm. |
|
|