2-Hydroxy-ethyl-acrylat Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
FARBLOSE FLüSSIGKEIT MIT CHARAKTERISTISCHEM GERUCH.
CHEMISCHE GEFAHREN
Der Stoff kann polymerisieren beim Erhitzen, bei Kontakt mit Peroxiden und unter Einfluss von Licht. Erhitzen kann zu sehr heftiger Verbrennung oder Explosion führen, unter Bildung von beißendem Rauch. Der Stoff kann auch spontan polymerisieren, falls nicht stabilisiert.
ARBEITSPLATZGRENZWERTE
TLV nicht festgelegt.
MAK: Sensibilisierung der Haut (Sh); (DFG 2008).
AUFNAHMEWEGE
Aufnahme in den Körper durch Inhalation der Dämpfe, über die Haut und durch Verschlucken.
INHALATIONSGEFAHREN
Beim Verdampfen bei 20°C kann sehr schnell eine gesundheitsschädliche Kontamination der Luft eintreten.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: Die Substanz reizt stark die Augen, die Haut und die Atemwege. Verschlucken der Flüssigkeit kann zur Aufnahme in der Lunge führen; Gefahr der Aspirationspneumonie.
WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION
Wiederholter oder andauernder Kontakt kann zu Hautsensibilisierung führen. (Siehe ANMERKUNGEN.)
LECKAGE
Persönliche Schutzausrüstung: Chemikalienschutzanzug. Atemschutzfilter für organische Gase und Dämpfe. Ausgelaufene Flüssigkeit in abgedeckten Behältern sammeln. Reste mit Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. NICHT in die Umwelt gelangen lassen.
R-Sätze Betriebsanweisung:
R24:Giftig bei Berührung mit der Haut.
R34:Verursacht Verätzungen.
R43:Sensibilisierung durch Hautkontakt möglich.
R50:Sehr giftig für Wasserorganismen.
R20/22:Gesundheitsschädlich beim Einatmen und Verschlucken.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/39:Bei der Arbeit geeignete Schutzkleidung und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
Beschreibung
2-Hydroxyethyl acrylate (HEA) forms homopolymers and copolymers. HEA is used mainly either as a co-monomer in the manufacture of polymers or as a chemical reactant in the manufacture of chemical intermediates. In the manufacture of polymers, HEA can be co-polymerized with acrylic acid, acrylates, methacrylates, vinyl acetate, vinyl chloride, vinylidene chloride, styrene, butadiene, and the like. Co-reactants with HEA include aromatic and aliphatic isocyanates, anhydrides, and epoxides. The polymers and chemical intermediates made with HEA find applications in automotive top coatings, architectural coatings, photocure resins, and adhesives. Globally about half of the HEA produced is used in the production of acrylic enamels for the automotive industry, where a clear topcoat is applied to a pigmented base coat to increase corrosion protection and durability.
Chemische Eigenschaften
Hydroxyethyl acrylate is a clear colorless liquid. miscible with water, soluble in general organic solvents. The commodity generally contains 400ppm of hydroquinone methylether, a polymerization inhibitor. Hydroxyethyl acrylate is a difunctional acrylate monomer with the characteristic high reactivity. Hydroxyethyl acrylate is used in a crylics for coatings, adhesives and UV reacitve oligomers. It can be used for crosslinking with isocyantes or melamines.
Verwenden
2-Hydroxyethyl acrylate is an acrylic monomer for use in UV inks, adhesives, lacquers, artificial nails, etc.
Definition
ChEBI: 2-Hydroxyethyl acrylate is a functional monomer for the manufacture of thermosetting acrylic resins.
Allgemeine Beschreibung
A clear colorless liquid. Less dense than water. Vapors heavier than air. Corrosive to tissue. Flash point 120°F. May polymerize exothermically if heated or contaminated. If the polymerization takes place inside a container, the container may rupture violently. Used to make plastics.
Air & Water Reaktionen
Flammable. Slightly soluble in water.
Reaktivität anzeigen
A functional monomer of thermosetting acrylic resins.
Health Hazard
Inhalation causes irritation of nose and throat. Contact with liquid irritates eyes and skin.
Brandgefahr
Behavior in Fire: Containers may explode
2-Hydroxy-ethyl-acrylat Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte