- Molybdenum hexacarbonyl
-
- $1.10 / 1g
-
2021-09-19
- CAS:13939-06-5
- Min. Order: 1g
- Purity: 99.00%
- Supply Ability: 100 Tons min
|
| | Molybdenum hexacarbonyl Basic information |
| Product Name: | Molybdenum hexacarbonyl | | Synonyms: | MOLYBDENUM (VI) HEXACARBONYL;MOLYBDENUM HEXACARBONYL;(OC-6-11)-Molybdenumcarbonyl;(oc-6-11)-molybdenumcarbonyl(mo(co)6;MOLYBDENUM HEXACARBONYL, SUBLIMED, 99.9&;Molybdenum carbonyl (Mo(CO)6);Molybdenum carbonyl (Mo(CO)6), (OC-6-11)-;Molybdenumcarbonyl(Mo(CO)6) | | CAS: | 13939-06-5 | | MF: | C6MoO6 | | MW: | 264 | | EINECS: | 237-713-3 | | Product Categories: | metal carbonyl complexes | | Mol File: | 13939-06-5.mol |  |
| | Molybdenum hexacarbonyl Chemical Properties |
| Melting point | 150 °C (dec.) (lit.) | | Boiling point | 156 °C (lit.) | | density | 1.96 g/mL at 25 °C (lit.) | | vapor density | 9.1 (vs air) | | vapor pressure | 0.13 hPa (20 °C) | | storage temp. | Store at <= 20°C. | | solubility | Slightly soluble in tetrahydrofuran, diglyme and acetonitrile. | | form | crystal | | Specific Gravity | 1.960 | | color | white | | Water Solubility | insoluble | | Hydrolytic Sensitivity | 4: no reaction with water under neutral conditions | | Exposure limits | ACGIH: TWA 10 mg/m3; TWA 3 mg/m3
NIOSH: IDLH 5000 mg/m3 | | InChIKey | KMKBZNSIJQWHJA-UHFFFAOYSA-N | | CAS DataBase Reference | 13939-06-5(CAS DataBase Reference) | | NIST Chemistry Reference | Molybdenum hexacarbonyl(13939-06-5) | | EPA Substance Registry System | Molybdenum carbonyl (Mo(CO)6), (OC-6-11)- (13939-06-5) |
| Hazard Codes | T+,Xi | | Risk Statements | 26/27/28 | | Safety Statements | 36/37/39-45-36/37-28A-22 | | RIDADR | UN 3466 6.1/PG 2 | | WGK Germany | 3 | | Hazard Note | Irritant | | TSCA | Yes | | HazardClass | 6.1 | | PackingGroup | II | | HS Code | 29310095 |
| | Molybdenum hexacarbonyl Usage And Synthesis |
| Chemical Properties | WHITE TO LIGHT YELLOW CRYSTALLINE POWDER | | Uses | Alumina supported molybdenum hexacarbonyl acts as an active catalyst. It is used to synthesize MoO and MoC nanowires by electron beam induced deposition. | | Uses | It is used as a catalyst in many organicsynthetic reactions. | | Uses | Plating molybdenum, i.e., molybdenum mir-rors; intermediate. | | General Description | Molybdenum hexacarbonyl is a colorless compound that sublimates and decomposes without melting at 150oC. It has an octahedral structure. Inherent sublimation of molybdenum hexacarbonyl permits it to perform as an active liquefaction catalyst. To form a catalyst it is adsorbed on dehydroxylated alumina forming subcarboyls. | | Hazard | Decomposes above 150C to evolve carbonmonoxide. | | Health Hazard | Molybdenum hexacarbonyl is a highly toxicsubstance. It is listed in Toxic SubstanceControl Act. Acute symptoms includeheadache, dizziness, nausea, vomiting, andfever. Because of its low vapor pressure,the risk of exposure of this compound,however, by inhalation is lower than thatfrom the volatile tetra- or pentacoordinatedmetal carbonyls. Ingestion of the compoundcan cause death. Absorption of its solutionthrough skin may cause severe poisoning,manifesting the same effects as those fromother routes of exposure. | | Fire Hazard | It reacts violently with strong oxidizers. Contact
with concentrated acids is expected to be
violent. Its solutions are susceptible to detonate
spontaneously (Owen 1950). Ethereal
solutions of this compound can explode on
extended storage (Bretherick 1995). | | Purification Methods | Sublime it in a vacuum before use [Connor et al. J Chem Soc, Dalton Trans 511 1986]. TOXIC. |
| | Molybdenum hexacarbonyl Preparation Products And Raw materials |
|