| Identification | More | [Name]
DIALLYL ISOPHTHALATE | [CAS]
1087-21-4 | [Synonyms]
DIALLYL ISOPHTHALATE
ISOPHTHALIC ACID DIALLYL ESTER
TIMTEC-BB SBB009971
1,3-Benzenedicarboxylic acid, di-2-propenyl ester
1,3-Benzenedicarboxylicacid,di-2-propenylester
dappu100
Di-2-Propenyl isophthalate
di-2-propenylisophthalate
Diallylm-phthalate
Isophthalic acid, di-(2-propenyl) ester
Di-amyl phathalate(TMP-511)
Dipropen-2-yl isophthalate
1,3-Benzenedicarboxylic acid diallyl ester
Isophthalic acid diallyl
Allyl Isophthalate | [EINECS(EC#)]
214-122-9 | [Molecular Formula]
C14H14O4 | [MDL Number]
MFCD00048174 | [Molecular Weight]
246.26 | [MOL File]
1087-21-4.mol |
| Safety Data | Back Directory | [Risk Statements ]
R36/37/38:Irritating to eyes, respiratory system and skin . | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection . | [RTECS ]
CZ4230000 | [TSCA ]
TSCA listed | [REACH Registrations]
Active | [HS Code ]
29155090 | [Toxicity]
mammal (species unspecified),LD50,oral,1700mg/kg (1700mg/kg),Gigiena i Sanitariya. For English translation, see HYSAAV. Vol. 39(4), Pg. 86, 1974. |
| Hazard Information | Back Directory | [Uses]
Diallyl isophthalate (DAIP) has the advantage over the ortho isomer that it polymerizes faster and gives polymers of better heat resistance. The DAIP prepolymer is less stable than the diallyl phthalate prepolymer. Cured moldings from DAIP monomer-prepolymer compositions can be better processed than cured diallyl phthalate moldings because of their greater fluidity. Compositions containing DAIP prepolymers can be used for the production of hard, translucent, abrasive-resistant, and laser-trimmable coatings.
| [Preparation]
Diallyl isophthalate (DAIP) is prepared by esterification of isophthalic acid
with allyl alcohol:
The polymers of diallyl isophthalate are very similar in preparation,
properties and application to the polymers of diallyl phthalate described
above. Mouldings based on diallyl isophthalate are more expensive but have
enhanced thermal stability (withstanding up to about 220??C for long periods)
and resistance to organic solvents. | [Flammability and Explosibility]
Notclassified |
|
|