| Identification | Back Directory | [Name]
MOLYBDENUM SELENIDE | [CAS]
12058-18-3 | [Synonyms]
Nsc378344
MoSe2 Crystal
Molydenum selenide
Molybdaendiselenid
MOLYBDENUM SELENIDE
DISELENOXOMOLYBDENUM
molybdenum diselenide
MOLYBDENUM (IV) SELENIDE
bis(selanylidene)molybdenum
Molybdenum selenide (MoSe2)
Molybdenum(IV) selenide(MoSe2)
MOLYBDENUM(IV) SELENIDE: 99.9%
Molybdenum(IV)selenide(99.9%-Mo)
Molybdenum Diselenide (MoSe2) Powder
Molybdenum Diselenide Monolayer Film
Molybdenum Diselenide (MoSe2) Crystal
(metals basis) Molybdenum(IV) selenide
Molybdenum diselenide Crystal, 99.995%
MOLYBDENUM SELENIDE ISO 9001：2015 REACH
IV) 99.9% metel basisMolybdenum selenide
Molybdenum(IV) selenide, 99.9% (metals basis)
Molybdenum(IV) selenide, 99.9% trace metals basis
Molybdenum(IV) selenide -325 mesh, 99.9% trace metals basis | [EINECS(EC#)]
235-027-9 | [Molecular Formula]
MoSe2 | [MDL Number]
MFCD00014216 | [MOL File]
12058-18-3.mol | [Molecular Weight]
253.86 |
| Chemical Properties | Back Directory | [Definition]
Available as a 40-micron powder. | [Melting point ]
>1200°C | [density ]
6 g/cm3 | [form ]
Powder | [color ]
Dark gray | [Specific Gravity]
6 | [Water Solubility ]
Insoluble in water. | [Exposure limits]
ACGIH: TWA 10 mg/m3; TWA 3 mg/m3; TWA 0.2 mg/m3
NIOSH: IDLH 5000 mg/m3; IDLH 1 mg/m3; TWA 0.2 mg/m3 | [Uses]
Solid lubricant. | [CAS DataBase Reference]
12058-18-3 | [EPA Substance Registry System]
Molybdenum selenide (MoSe2) (12058-18-3) | [Bandgap]
1.41 - 1.58 eV | [Electronic properties]
2D semiconductor |
| Hazard Information | Back Directory | [Description]
Molybdenum(IV) selenide, also known as molybdenum diselenide or 12058-18-3, is an inorganic compound with the chemical formula MoSe2. It belongs to a group of compounds called transition metal disulfides (TMDCs), which are formed by combining a transition metal with an element from group 16 on the periodic table. MoSe2 has higher electrical conductivity than MoS2.
| [Chemical Properties]
gray powder(s); used as a solid lubricant and lubricant film prepared by sputtering 99.9% pure material [HAW93] [STR93] [CER91] | [Physical properties]
The monolayer film of molybdenum diselenide, with a direct optical band gap of 1.48 eV and a photoluminescence peak at 840 nm, is highly suitable for optoelectronic applications. Moreover, when compared to MoS2, MoSe2 ultrathin films demonstrate a narrower bandgap, higher optical absorbance, and larger spin-splitting energy. These characteristics make MoSe2 films potentially superior to MoS2 for the utilization in tunnel FETs and optoelectronic devices. | [Preparation]
Mo and Se were mixed at a molar ratio of 1:2, and molybdenum and selenium reacted at a temperature of 800 to 1150°C to form mainly molybdenum diselenide(MoSe2). High-quality monolayer films of molybdenum diselenide were successfully grown directly on SiO2/Si substrates using the chemical vapor deposition (CVD) method. | [Synthesis]
Chemical exfoliation, utilizing N-methyl pyrrolidone (NMP) as a solvent, allows for the large-scale production of nano-particles and nano-sheets. This method enables the direct preparation of molybdenum diselenide (MoSe2) quantum dots from bulk powder of molybdenum diselenide.? |
|
| Company Name: |
Alfa Aesar
|
| Tel: |
400-6106006 |
| Website: |
http://chemicals.thermofisher.cn |
| Company Name: |
Energy Chemical
|
| Tel: |
021-021-58432009 400-005-6266 |
| Website: |
http://www.energy-chemical.com |
|