| Identification | More | [Name]
4-Amino-benzenesulfonic acid monosodium salt | [CAS]
515-74-2 | [Synonyms]
4-AMINOBENZENESULFONIC ACID SODIUM SALT
4-SULFOANILINE SODIUM SALT
P-ANILINESULFONIC ACID SODIUM SALT
SODIUM ANILINESULFONATE
SODIUM SULFANILATE
SULFANILIC ACID SODIUM SALT
SULPHANILIC ACID SODIUM SALT
4-amino-benzenesulfonicacimonosodiumsalt
Benzenesulfonicacid,4-amino-,monosodiumsalt
p-Aminobenzenesulfonicacidsodiumsalt
Sodium,4-aminobenzenesulfonate
sodium4-aminobenzenesulfonate
Sodiump-aminobenzenesulfonate
sodiumsulphanilate
sulphate p-aminobenzensulfonate
SODIUM-P-AMINOBENZENSULFONATE
SULFANILICACIDSODIUMSALT,REAGENT
4-AMPYRONE 99% HIGH GRADE
4-Amino-benzenesulfonic acid monosodium salt
4-Aminobenzenesulfonic acid sodium | [EINECS(EC#)]
208-208-5 | [Molecular Formula]
C6H6NNaO3S | [MDL Number]
MFCD00064394 | [Molecular Weight]
195.17 | [MOL File]
515-74-2.mol |
| Questions And Answer | Back Directory | [Preparation method]
4-Amino-benzenesulfonic acid monosodium salt is obtained by transposition and neutralization of aniline sulfonated.
 | [Production process flow chart]
Put 98% sulphuric acid in the oil bath sulfonated cauldron and add 99% aniline to it after stirring the sulphuric acid for 1 hour. Raise the temperature of the cauldron to 160℃. Launch the vacuum system and make the vacuum degree0.053MPa in the cauldron.Then the temperature of the cauldron is raised to 200℃. The heat preservation lasts for half an hour before the temperature is raised to 260℃ and the completion of heat preservation to transposition. At this time cool and close the vacuum system, keep 10 minutes and discharge the vacuum in the cauldron, gradually cooling to 80℃ . Add water and stir it before putting in the storage tank. In the storage tank, the material is heated to 70-80 degrees centigrade. Add the sodium carbonate and neutralize it to pH=7.0 - 7.5 before moving into the neutralization cauldron with the batch mother liquid. The relative density of water is adjusted to 1.12 before being heated to boiling. Then the activated carbon will be added and stirring is made for half an hour followed by the thermal filtration. The filter cake is washed with water, and the filtrate is steamed to a relative density of 1.18. Afterwards, it is put into the crystallizer and cooled to 30 ℃ in 8 hours followed by the centrifuge filtration. The filtrate can be used as the next batch of mother liquid and the filter cake is p-aminophenylsulfonic acid.
 | [Uses]
4-Amino-benzenesulfonic acid monosodium salt can be used as a fungicide. It is mainly used to control the rust of wheat and the rust of other crops.It can also be used for the prevention and control of wheat rust, dilute the original fungicide with 250 times of liquid to spray the occurrence of the disease points and range. |
|
|