| Identification | More | [Name]
NEODYMIUM | [CAS]
7440-00-8 | [Synonyms]
Nd
ND007940
ND007910
ND005110
NEODYMIUM
NEW NEODYMIUM
neodymium atom
Neodymium foil
Neodymium ingot
Neodymium chips
NEODYMIUM METAL
Neodymium (Reo)
NEODYMIUM, 99.9%
Neodymium powder
Neodymium Pieces
NeodymiumchipsNREO
NEODYMIUM STANDARD
Neodymium solution
lump,vacuumremelted
Nd Standard Solution
Neodymium foil50x50mm
Neodymium foil25x25mm
NeodyMiuM Metal powder
NEODYMIUM, CHIP, 99.9%
Neodymium, Chips 99.9%
NEODYMIUM ICP STANDARD
NEODYMIUM, INGOT, 99.9%
Neodymiumfoil(99.9%REO)
NEODYMIUM: 99.9%, INGOT
NEODYMIUM, 99.90%, INGOT
Neodymium, ingot, 99.90%
Neodymiumchips(99.9%REO)
INDIUM 10,000PPM FOR ICP
Neodymiumpowder(99.9%REO)
Neodymium, Powder 40 Mesh
Neodymiumlumpvacuumremelted
NeodyMiuM powder (99.8% REO)
NEODYMIUM ISO 9001：2015 REACH
Neodymium rod, dia 8 mm, 99%+
Neodymium, Powder 40 Mesh 99.9%
NEODYMIUM FOIL, 3N: (99.9% REO)
NEODYMIUM CHIPS, 3N: (99.9% REO)
NEODYMIUM INGOT, 3N: (99.9% REO)
NEODYMIUM, AAS STANDARD SOLUTION
Neodymium rod, dia 12.7mm, 99.9%
Neodymium rod, dia 6.35 mm, 99.9%
NEODYMIUM POWDER, 3N: (99.9% REO)
NEODYMIUM, POWDER, -40 MESH, 99+%
NEODYMIUM SINGLE ELEMENT STANDARD
NEODYMIUM PLASMA EMISSION STANDARD
NEODYMIUM, PLASMA STANDARD SOLUTION
Neodymium lump, 10-40 mm max, 99.9%
NEODYMIUM ATOMIC ABSORPTION STANDARD
NeodymiumingotNREOpackedinmineraloil
NeodymiumpowderNREOmicronsunderargon
Neodymium rod, 12.7mm (0.5 in.) dia.
Neodymium ingot, 99.9% (metals basis)
NeodymiumfoilNREOmmthickcagxmmpackedi
NeodyMiuM ingot, 99.1% (Metals basis)
Neodymium foil, 1.0mm (0.04 in.) thick
Neodymium foil, 0.3mm (0.012 in.) thick
Neodymium foil, 0.1mm (0.004 in.) thick
Neodymium ingot, 99% trace metals basis
NEODYMIUM ICP STANDARD TRACEABLE TO SRM
Neodymium powder, -325 mesh, 99.9% (REO)
Neodymium rod, &ap:6.35mm (0.25 in.) dia.
NEODYMIUM ATOMIC ABSORPTION STANDARD SOLUTION
NEODYMIUM, POWDER, -40 MESH, 99+% METALS BASIS
NEODYMIUM PLASMA EMISSION SPECTROSCOPY STANDARD
Neodymium plasma standard solution, Nd 1000μg/mL
Neodymium plasma standard solution, Nd 10000μg/mL
Neodymium foil (99.9% REO)(packed in mineral oil)
Neodymium standard solution, 1 mg/ml Nd in 2% HNO3
Neodymium, AAS standard solution, Specpure(R), Nd 1000μg/ml
Neodymium, plasma standard solution, Specpure(R), Nd 1000μg/ml
Neodymium, plasma standard solution, Specpure(R), Nd 10,000μg/ml
Neodymium rod, 12.7mm dia., 99.5% trace metals basis excluding Ta
Neodymium rod, 6.35mm dia., 99.5% trace metals basis excluding Ta
Neodymium, Natural Nd, plasma standard solution, Natural Nd 10μg/mL | [EINECS(EC#)]
231-109-3 | [Molecular Formula]
Nd | [MDL Number]
MFCD00011130 | [Molecular Weight]
144.24 | [MOL File]
7440-00-8.mol |
| Chemical Properties | Back Directory | [Definition]
Metallic element having atomic number 60, group
IIIB of the periodic table, aw 144.24, valence of
3. A rare-earth element of the lanthanide (cerium)
group. There are seven isotopes | [Appearance]
grey metal ingot | [Melting point ]
1021 °C (lit.) | [Boiling point ]
3074 °C (lit.) | [density ]
7.003 g/mL at 25 °C(lit.)
| [form ]
ingot
| [color ]
Silver | [Specific Gravity]
7.003 | [Resistivity]
64.0 μΩ-cm, 20°C | [Water Solubility ]
Soluble in dilute acids. Decomposes in water. | [Sensitive ]
Air & Moisture Sensitive | [Merck ]
13,6478 | [Exposure limits]
ACGIH: TWA 2 ppm; STEL 4 ppm
OSHA: TWA 2 ppm(5 mg/m3)
NIOSH: IDLH 25 ppm; TWA 2 ppm(5 mg/m3); STEL 4 ppm(10 mg/m3) | [History]
In 1841 Mosander extracted from cerite a
new rose-colored oxide, which he believed contained a new element. He named the element didymium, as it was an inseparable
twin brother of lanthanum. In 1885 von Welsbach
separated didymium into two new elemental components,
neodymia and praseodymia, by repeated fractionation of ammonium
didymium nitrate. While the free metal is in misch
metal, long known and used as a pyrophoric alloy for light
flints, the element was not isolated in relatively pure form
until 1925. Neodymium is present in misch metal to the extent
of about 18%. It is present in the minerals monazite and
bastnasite, which are principal sources of rare-earth metals.
The element may be obtained by separating neodymium salts
from other rare earths by ion-exchange or solvent extraction
techniques, and by reducing anhydrous halides such as NdF3
with calcium metal. Other separation techniques are possible.
The metal has a bright silvery metallic luster. Neodymium is
one of the more reactive rare-earth metals and quickly tarnishes
in air, forming an oxide that splits off and exposes metal
to oxidation. The metal, therefore, should be kept under light
mineral oil or sealed in a plastic material. Neodymium exists
in two allotropic forms, with a transformation from a double
hexagonal to a body-centered cubic structure taking place at
863°C. Natural neodymium is a mixture of seven isotopes, one
of which has a very long half-life. Twenty-seven other radioactive
isotopes and isomers are recognized. Didymium, of which
neodymium is a component, is used for coloring glass to make
welder’s goggles. By itself, neodymium colors glass delicate
shades ranging from pure violet through wine-red and warm
gray. Light transmitted through such glass shows unusually
sharp absorption bands. The glass has been used in astronomical
work to produce sharp bands by which spectral lines may
be calibrated. Glass containing neodymium can be used as a
laser material to produce coherent light. Neodymium salts
are also used as a colorant for enamels. The element is also
being used with iron and boron to produce extremely strong
magnets. These are the most compact magnets commercially
available. The price of the metal is about $4/g. Neodymium
has a low-to-moderate acute toxic rating. As with other rare
earths, neodymium should be handled with care. | [Uses]
Neodymium salts, electronics, alloys, colored
glass, (especially in astronomical lenses and lasers),
to increase heat resistance of magnesium, metallurgical research, yttrium-garnet laser dope, gas scavenger in iron and steel manufacture | [CAS DataBase Reference]
7440-00-8(CAS DataBase Reference) | [EPA Substance Registry System]
Neodymium (7440-00-8) |
| Safety Data | Back Directory | [Hazard Codes ]
F,Xi | [Risk Statements ]
R11:Highly Flammable.
R36/37/38:Irritating to eyes, respiratory system and skin .
R14/15:Reacts violently with water, liberating extremely flammable gases .
R36/38:Irritating to eyes and skin . | [Safety Statements ]
S16:Keep away from sources of ignition-No smoking .
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S33:Take precautionary measures against static discharges .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S43:In case of fire, use ... (indicate in the space the precise type of fire-fighting equipment. If water increases the risk add-Never use water) . | [RIDADR ]
UN 3208 4.3/PG 1
| [WGK Germany ]
3
| [RTECS ]
QO8575000
| [F ]
10 | [TSCA ]
Yes | [HazardClass ]
8 | [PackingGroup ]
III | [HS Code ]
28053011 | [Safety Profile]
Human systemic effects
by intracerebral route: blood changes. It may
be an anticoagulant lanthanoid. Care in
handling is advised. Flammable in the form
of dust when exposed to heat or flame.
Slight explosion hazard in the form of dust
when exposed to flame. Can react violently
with air, halogens, N2.Violent reaction with
phosphorus above 4OOOC. Many of its
compounds are poisons. |
| Hazard Information | Back Directory | [Hazard]
(Salts) Irritant to eyes and abraded skin | [Chemical Properties]
grey metal ingot | [Physical properties]
Neodymium is the third most abundant rare-earth element in the Earth’s crust (24 ppm). Itis reactive with moist air and tarnishes in dry air, forming a coating of Nd3O3, an oxide witha blue tinge that flakes away, leaving bare metal that then will continue to oxidize.
Its melting point is 1,021°C, its boiling point is 3,074°C, and its density is 7,01 g/cm3. | [Isotopes]
There are 47 isotopes of neodymium, seven of which are considered stable.Together the stable isotopes make up the total abundance in the Earth’s crust. Twoof these are radioactive but have such long half-lives that they are considered stablebecause they still exist on Earth. They are Nd-144 (half-life of 2.29×10+15 years) andNd-150 (half-life of 6.8×10+15years). All the other isotopes are synthetic and havehalf-lives ranging from 300 nanoseconds to 3.37 days. | [Origin of Name]
Derived from the two Greek words neos and didymos. When combined,
they mean “new twin.” | [Occurrence]
Although neodymium is the 28th most abundant element on Earth, it is third in abundanceof all the rare-earths. It is found in monazite, bastnasite, and allanite ores, where it isremoved by heating with sulfuric acid (H2SO4). Its main ore is monazite sand, which is amixture of Ce, La, Th, Nd, Y, and small amounts of other rare-earths. Some monazite sandsare composed of over 50% rare-earths by weight. Like most rare-earths, neodymium can beseparated from other rare-earths by the ion-exchange process. | [Characteristics]
As an element, neodymium is a soft silver-yellow metal. It is malleable and ductile. It canbe cut with a knife, machined, and formed into rods, sheets, powder, or ingots. Neodymiumcan form trivalent compounds (salts) that exhibit reddish or violet-like colors.
Neodymium reacts with water to form Nd(OHO)3 and hydrogen (H2), which can explodeif exposed to a flame or spark. It is shipped and stored in containers of mineral oil. | [Production Methods]
Neodymium is recovered mostly from mineral monazite and bastnasite, thetwo most abundant rare-earth minerals. Monazite is a rare earth-thorium phosphate usually containing between 9 to 20% neodymium. Bastnasite is a rare earth fluocarbonate ore containing 2 to 15% neodymium. Both ores are first cracked by heating with concentrated sulfuric acid or sodium hydroxide. The recovery process from monazite ore using sulfuric acid is described below:
Heating the ore with sulfuric acid converts neodymium to its water soluble sulfate. The product mixture is treated with excess water to separate neodymium as soluble sulfate from the water-insoluble sulfates of other metals, as well as from other residues. If monazite is the starting material, thorium is separated from neodymium and other soluble rare earth sulfates by treating the solution with sodium pyrophosphate. This precipitates thorium pyrophosphate. Alternatively, thorium may be selectively precipitated as thorium hydroxide by partially neutralizing the solution with caustic soda at pH 3 to 4. The solution then is treated with ammonium oxalate to precipitate rare earth metals as their insoluble oxalates. The rare earth oxalates obtained are decomposed to oxides by calcining in the presence of air. Composition of individual oxides in such rare earth oxide mixture may vary with the source of ore and may contain neodymium oxide, as much as 18%.
The oxalates obtained above, alternatively, are digested with sodium hydroxide converting the rare earth metals to hydroxides. Cerium forms a tetravalent hydroxide, Ce(OH)4, which is insoluble in dilute nitric acid. When dilute nitric acid is added to this rare earth hydroxide mixture, cerium(IV) hydroxide forms an insoluble basic nitrate, which is filtered out from the solution. Cerium also may be removed by several other procedures. One such method involves calcining rare earth hydroxides at 500°C in air. Cerium converts to tetravalent oxide, CeO2,while other lanthanides are oxidized to trivalent oxides. The oxides are dissolved in moderately concentrated nitric acid. Ceric nitrate so formed and any remaining thorium nitrate present is now removed from the nitrate solution by contact with tributyl phosphate in a countercurrent
After removing cerium (and thorium), the nitric acid solution of rare earths is treated with ammonium nitrate. Lanthanum forms the least soluble double salt with ammonium nitrate, which may be removed from the solution by repeated crystallization. Neodymium is recovered from this solution as the double magnesium nitrate by continued fractionation.
Three alternative methods may be mentioned here, which give high purity material and are less tedious than the one described above. These are (1) ion exchange, (2) metallothermic reduction, and (3) electrolysis
In the ion exchange process, the nitric acid solution of the rare earth oxides obtained above is passed through a sulfonated styrene-divinylbenzene copolymer or other cation exchange resin in the hydrogen form. The rare earths are selectively eluted by flowing down a chelating solution of ethylenediamine tetraacetic acid (EDTA), or citric acid, or nitrilotriacetate (NTA) through the loaded column. The most stable complexes are eluted first. Metal ions are selectively stripped out in successive stages.
In the metallothermal reduction, the mixture of rare earth oxides obtained above is first converted to their halide salts. This is done by heating the oxidesat 300 to 400°C with dry and purified hydrogen fluoride, or preferably, by allowing dry hydrogen fluoride to pass over rare earth oxides and ammonium fluoride at 300-400°C. If chloride salt is desired, the oxides must be heated with ammonium chloride. For example, neodymium oxide may be converted to its fluoride or chloride:
Nd2O3 + 6NH4F?HF → 2NdF3 + 6NH4F↑ + 3H2O↑
Nd2O3 + 6NH4Cl → 2NdCl3 + 6NH3↑ + 3H2O↑
Neodymium, along with lanthanum, cerium and praseodymium, has low melting points and high boiling points. The fluorides of these and other rare earth metals are placed under highly purified helium or argon atmosphere in a platinum, tantalum or tungsten crucible in a furnace. They are heated under this inert atmosphere or under vacuum at 1000 to 1500°C with an alkali or alkaline earth metal. The halides are reduced to their metals:
2NdF3 + Ca → 2Nd + 3CaF2
NdCl3 + 3Li → Nd + 3LiCl
The crucible is allowed to cool and is held at a temperature slightly above the melting point of neodymium for a sufficient time to allow separation of the metal.
In the electrolytic process, a fused mixture of anhydrous rare earth chlorides (obtained above) and sodium or potassium chloride is electrolyzed in an electrolytic cell at 800 to 900°C using graphite rods as the anode. The cell is constructed of iron, carbon or refractory linings. Molten metal settles to the bottom and is removed periodically. |
| Questions And Answer | Back Directory | [General Description]
Neodymium is the most abundant of the rare earths after Cerium and Lanthanum. It shows similar characteristics to the other trivalent Lanthanides.
Primary applications include lasers, glass coloring and tinting, dielectrics and, most importantly, as the fundamental basis for Neodymium-Iron-Boron (Nd2Fe14B) permanent magnets.
Neodymium has a strong absorption band centered at 580 nm, which is very close to the human eye's maximum level of sensitivity making it useful in protective lenses for welding goggles. It is also used in CRT displays to enhance contrast between reds and greens. It is highly valued in glass manufacturing for its attractive purple coloring to glass.
Neodymium is included in many formulations of barium titanate, used as dielectric coatings and in multi-layer capacitors essential to electronic equipment.
Yttrium-Aluminum-Garnet (YAG) solid state lasers utilize neodymium because it has optimal absorption and emitting wavelengths. Nd-based YAG lasers are used in various medical applications, drilling, welding and material processing.
Neodymium has an unusually large specific heat capacity at liquid-helium temperatures, so is useful in cryocoolers.
Probably because of similarities to Ca2+, Nd3+ has been reported to promote plant growth. Rare earth element compounds are frequently used in China as fertilizer.
It is still a popular additive in glasses. Neodymium is also used to make some of the strongest permanent magnets. These magnets are widely used in electrical motors, generators and some other electronics such as microphones, loudspeakers and computer hard disks. Neodymium is also used with other substrate crystals to make high-powered infrared lasers.
Neodymium Metal is mainly used in manufacturing very powerful permanent magnets-Neodymium-Iron-Boron magnets, and also are applied in making specialty superalloy and sputtering targets. Neodymium is also used in the electric motors of hybrid and electric automobiles, and in the electricity generators of some designs of commercial wind turbines.
 |
|
| Company Name: |
Alfa Aesar
|
| Tel: |
400-6106006 |
| Website: |
http://chemicals.thermofisher.cn |
| Company Name: |
Energy Chemical
|
| Tel: |
021-021-58432009 400-005-6266 |
| Website: |
http://www.energy-chemical.com |
|