| Identification | More | [Name]
MOLYBDENUM HEXAFLUORIDE | [CAS]
7783-77-9 | [Synonyms]
MOLYBDENUM FLUORIDE
MOLYBDENUM HEXAFLUORIDE
MOLYBDENUM(VI) FLUORIDE
(oc-6-11)-molybdenumfluoride(mof6
Hexafluoromolybdenum
MoF6
Molybdenum fluoride (MoF6)
Molybdenum fluoride (MoF6), (OC-6-11)-
MOLYBDENUM(VI) FLUORIDE, CYLINDER
MOLYBDENUM(VI) FLUORIDE 99.9+%
Molybdenum hexafluoride 99%
Molybdenumhexafluoride99%
molydenum ftuoride
Molybdenum(VI)hexafluoride | [EINECS(EC#)]
232-026-5 | [Molecular Formula]
F6Mo | [MDL Number]
MFCD00014220 | [Molecular Weight]
209.93 | [MOL File]
7783-77-9.mol |
| Chemical Properties | Back Directory | [Appearance]
liquid | [Melting point ]
17.5 °C(lit.)
| [Boiling point ]
37 °C(lit.)
| [density ]
2.3 g/mL at 25 °C(lit.)
| [Fp ]
35°CC | [solubility ]
Miscible with saturated hydrocarbons, chlorinated and fluorinated hydrocarbons. | [form ]
Liquid | [color ]
Colorless | [Water Solubility ]
hydrolyzed in H2O; soluble anhydrous HF: 1.5 moles/1000g HF [MER06] | [Specific Heat Capacity]
Cp(liquid):169.8J/(g·K);Cp(gas):0.574477J/(g·K),at 25℃ | [Crystal Structure]
Cubic | [Sensitive ]
Hygroscopic | [Merck ]
14,6237 | [Exposure limits]
ACGIH: TWA 2.5 mg/m3
NIOSH: IDLH 250 mg/m3 | [InChI]
InChI=1S/6FH.Mo/h6*1H;/q;;;;;;+6/p-6 | [InChIKey]
RLCOZMCCEKDUPY-UHFFFAOYSA-H | [SMILES]
[Mo](F)(F)(F)(F)(F)F | [Uses]
Separation of molybdenum isotopes. | [CAS DataBase Reference]
7783-77-9(CAS DataBase Reference) | [EPA Substance Registry System]
Molybdenum fluoride (MoF6), (OC-6-11)- (7783-77-9) |
| Hazard Information | Back Directory | [Chemical Properties]
liquid | [Hazard]
Strong irritant. | [Physical properties]
White cubic crystals or colorless volatile liquid; hygroscopic; density 2.54 g/cm3; melts at 17.5°C; boils at 34°C; critical temperature 200°C; critical pressure 46.88 atm; critical volume 226 cm3/mol; reacts with water (hydrolyzed). | [Definition]
ChEBI: Molybdenum hexafluoride is a molybdenum halide. | [Preparation]
Molybdenum hexafluoride is prepared by passing fluorine over molybdenum powder:
Mo + 3F2 → MoF6. | [Purification Methods]
Purify the hexafluoride by low-temperature trap-to-trap distillation over pre-dried NaF. It is hygroscopic, fumes in moist air and is hydrolysed readily by H2O. [Oppengard et al. J Am Chem Soc 82 3825 1960, Anderson & Winfield J Chem Soc, Dalton Trans 337 1986, Kwasnik in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol I p 259 1963.] Poisonous vapours. |
| Safety Data | Back Directory | [Hazard Codes ]
C | [Risk Statements ]
R34:Causes burns. | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) . | [RIDADR ]
UN 3264 8/PG 2
| [WGK Germany ]
3
| [RTECS ]
QA4681450
| [F ]
10-21 | [Hazard Note ]
Corrosive | [TSCA ]
Yes | [HazardClass ]
6.1 | [PackingGroup ]
II | [HS Code ]
28261990 |
|
| Company Name: |
Alfa Aesar
|
| Telephone: |
400-6106006 |
| Website: |
http://chemicals.thermofisher.cn |
| Company Name: |
Energy Chemical
|
| Telephone: |
400-0056266 |
| Website: |
www.energy-chemical.com |
|