Ethylquecksilberchlorid Chemische Eigenschaften,Einsatz,Produktion Methoden
R-Sätze Betriebsanweisung:
R26/27/28:Sehr giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
R33:Gefahr kumulativer Wirkungen.
R50/53:Sehr giftig für Wasserorganismen, kann in Gewässern längerfristig schädliche Wirkungen haben.
S-Sätze Betriebsanweisung:
S13:Von Nahrungsmitteln, Getränken und Futtermitteln fernhalten.
S28:Bei Berührung mit der Haut sofort abwaschen mit viel . . . (vom Hersteller anzugeben).
S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.
S60:Dieses Produkt und sein Behälter sind als gefährlicher Abfall zu entsorgen.
Chemische Eigenschaften
silver crystals or white solid
Verwenden
Applied at 2% strength (soln or mixed with solids) as a fungicide for treating seeds.
Allgemeine Beschreibung
Silver iridescent crystals or white fluffy solid . Sublimes easily. Sensitive to light. Highly toxic. Causes skin burns and is absorbed through the skin.
Air & Water Reaktionen
Insoluble in water.
Reaktivität anzeigen
ETHYLMERCURIC CHLORIDE is sensitive to prolonged exposure to light. Incompatible with strong oxidizers such as chlorine .
Hazard
Strong irritant.
Brandgefahr
Flash point data for ETHYLMERCURIC CHLORIDE are not available; however, ETHYLMERCURIC CHLORIDE is probably combustible.
Sicherheitsprofil
Poison by ingestion,
inhalation, skin contact, and intraperitoneal
routes. An experimental teratogen. Other
experimental reproductive effects. Human
mutation data reported. See also
MERCURY COMPOUNDS, ORGANIC.
When heated to decomposition it emits very
toxic fumes of Cland Hg.
mögliche Exposition
This chemical is used in manufacture of
coatings, resins, and lacquers. Widely known as “Plexiglass”
(in the polymer form), ethyl methacrylate is used to make
polymers, which in turn are used for building, automotive,
aerospace, and furniture industries. It is also used by dentists
as dental plates, artificial teeth, and orthopedic cement.
Versand/Shipping
UN2277 Ethyl methacrylate, stabilized, Hazard
Class: 3; Labels: 3-Flammable liquid
läuterung methode
Mercuric chloride can be removed by suspending ethylmercuric chloride in hot distilled water, filtering with suction onto a sintered-glass crucible and drying it. Then crystallise it from ethanol and sublime it under reduced pressure. It can also be crystallised from water. [Marvel et al. J Am Chem Soc 47 3009 1925.]
Inkompatibilitäten
May form explosive mixture with air.
Incompatible with oxidizers (chlorates, nitrates, peroxides,
permanganates, perchlorates, chlorine, bromine, fluorine,etc.); contact may cause fires or explosions. Keep away
from alkaline materials, strong bases, strong acids, oxoacids, and epoxides. Corrodes some metals. Unless inhibited,
violent polymerization can occur from heat, sunlight, and
contact with strong oxidizers
Waste disposal
In accordance with 40CFR
165 recommendations for the disposal of pesticides and
pesticide containers. Must be disposed properly by following package label directions or by contacting your local or
federal environmental control agency, or by contacting
your regional EPA office.
Ethylquecksilberchlorid Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
