Ferrocene manufacturers and suppliers

Ferrocene suppliers

Properties

Melting point:: 172-174 °C (lit.)

Boiling point:: 249 °C (lit.)

bulk density: 500kg/m3

Density: 1.490

vapor pressure: 0.03 mm Hg ( 40 °C)

Flash point:: 100°C

storage temp.: Store below +30°C.

solubility: insoluble in H2O; soluble in ethanol, ethyl ether,benzene, dilute HNO 3

form: crystal

color: orange

Water Solubility: practically insoluble

λmax: 358 nm

Sensitive: Air & Moisture Sensitive

Merck: 14,4037

Sublimation: 100 ºC

Exposure limits: ACGIH:TLV-TWA 10 mg/m3,as Fe
OSHA:PEL-TWA 15 mg/m3 (total dust),5 mg/m3 (respirable fraction)
NIOSH:REL-TWA 10 mg/m3 (total dust),5 mg/m3 (respirable fraction)

Stability:: Stable at room temperature. Incompatible with strong oxidizing agents. Highly flammable.

InChI: 1S/2C5H5.Fe/c2*1-2-4-5-3-1;/h2*1-5H;

InChIKey: DFRHTHSZMBROSH-UHFFFAOYSA-N

SMILES: [Fe].[CH]1[CH][CH][CH][CH]1.[CH]2[CH][CH][CH][CH]2

LogP: 3.711 at 22℃

CAS DataBase Reference: 102-54-5(CAS DataBase Reference)

NIST Chemistry Reference: Ferrocene(102-54-5)

EPA Substance Registry System: Ferrocene (102-54-5)

Safety Information

Symbol(GHS): GHS02,GHS07,GHS08,GHS09

Signal word: Danger

Hazard statements: H228-H302+H332-H360FD-H373-H410

Precautionary statements: P202-P210-P273-P301+P312-P304+P340+P312-P308+P313

target organs: Liver

PPE: Eyeshields, Gloves, type P3 (EN 143) respirator cartridges

Hazard Codes: F,Xn,N

Risk Statements: 11-22-51/53-2017/11/22

Safety Statements: 61-22-24/25

RIDADR: UN 1325 4.1/PG 2

OEB: B

OEL: TWA: 10 mg/m3 (total)

WGK Germany: 2

RTECS: LK0700000

Autoignition Temperature: >150 °C

TSCA: TSCA listed

HazardClass: 4.1

PackingGroup: II

HS Code: 29310095

Storage Class: 4.1B - Flammable solid hazardous materials

Hazard Classifications: Acute Tox. 4 Inhalation
Acute Tox. 4 Oral
Aquatic Chronic 1
Flam. Sol. 1
Repr. 1B
STOT RE 2 Inhalation

Hazardous Substances Data: 102-54-5(Hazardous Substances Data)

Toxicity: LD50 orally in Rabbit: 1320 mg/kg LD50 dermal Rat > 3000 mg/kg

REACH Registrations: Active

Limited Quantities: 1.0 Kg (2.2 lbs)

Excepted Quantities: Max Inner Pack (30g or 30ml) and Max Outer Pack (500g or 500ml)

Use

Ferrocene can be used as the additives of rocket fuel, the antiknock agent of gasoline and the curing agent of rubber and silicone resin as well as the ultraviolet absorber.

You can find Ferrocene suppliers, manufacturers, and distributors from countries such as China, United States and the India here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.