CYCLODODECANE manufacturers and suppliers

Cyclododecane suppliers

Properties

Melting point:: 59-61°C

Boiling point:: 111 °C / 17mmHg

Density: 0.790

vapor pressure: 9.83Pa at 20℃

refractive index: 1.4860 (estimate)

Flash point:: 88℃

storage temp.: Sealed in dry,Room Temperature

Appearance: White to off-white Solid

Water Solubility: 16μg/L at 20℃

Henry's Law Constant: 6.4×10^-6 mol/(m³Pa) at 25℃, HSDB (2015)

Stability:: Stable. Combustible. Incompatible with strong oxidizing agents.

InChI: InChI=1S/C12H24/c1-2-4-6-8-10-12-11-9-7-5-3-1/h1-12H2

InChIKey: DDTBPAQBQHZRDW-UHFFFAOYSA-N

SMILES: C1CCCCCCCCCCC1

LogP: 7.6 at 25℃

CAS DataBase Reference: 294-62-2(CAS DataBase Reference)

EPA Substance Registry System: Cyclododecane (294-62-2)

Safety Information

Symbol(GHS): GHS07,GHS08,GHS09

Signal word: Danger

Hazard statements: H413

Precautionary statements: P273-P501

Safety Statements: 24/25

RIDADR: 1325

RTECS: GV2295000

TSCA: TSCA listed

HazardClass: 4.1

PackingGroup: III

HS Code: 29021990

Hazardous Substances Data: 294-62-2(Hazardous Substances Data)

REACH Registrations: Active

Use

Cyclododecane can be applied as a solvent solution or a melt. There should be a consideration of the substrate when selecting an application methods. Cyclododecane is generally reapplied between treatments for works of art paper. Cyclododecane melts at about 60oC and can applied with a wax-melting stylus, heated spatula, melting the compound, and spraying machine. A rheostat may be used to control the temperatures of the tools used to apply cyclododecane. Brush application should not be used unless a solvent is added at lower melting point. Cyclododecane will solidify and form a film after cooling. On the other hand, an immediate transition in temperature will form a dense, homogeneous film. Cyclododecane can be dissolved in aromatic and non-polar solvents and applied by syringe, brush, or aerosol-spray. However, it is almost impossible to produce uniform films and numerous applications are needed to build up the film. It is important to note that a film layer should be produced using a saturated solution. The concentration of solid will fluctuate with use of a heated stirring tool and the choice of solvent.

You can find Cyclododecane suppliers, manufacturers, and distributors from countries such as China, United States and the Germany here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.