| Company Name: |
Mainchem Co., Ltd.
|
| Tel: |
+86-0592-6210733 |
| Email: |
sale@mainchem.com |
| Products Intro: |
Product Name:BIS(2-CHLOROISOPROPYL)ETHER
CAS:108-60-1
|
|
| | BIS(2-CHLOROISOPROPYL)ETHER Basic information |
| Product Name: | BIS(2-CHLOROISOPROPYL)ETHER | | Synonyms: | (2-Chloro-1-methylethyl) ether;(2-chloro-1-methylethyl)ether;1-Chloro-2-(2-chloro-1-methylethoxy)propane;2,2’-dichlorodiisopropylether;2,2’-dichloroisopropylether;2,2’-oxybis(1-chloro-propan;2,2’-oxybis(1-chloropropane);2,2’-oxybis[1-chloro-propan | | CAS: | 108-60-1 | | MF: | C6H12Cl2O | | MW: | 171.06 | | EINECS: | 203-598-3 | | Product Categories: | | | Mol File: | 108-60-1.mol |  |
| | BIS(2-CHLOROISOPROPYL)ETHER Chemical Properties |
| Melting point | -97℃ | | Boiling point | 242.21°C (rough estimate) | | density | 1.1030 | | vapor pressure | 0.56 (quoted, Kawamoto and Urano, 1989) | | refractive index | 1.4505 (estimate) | | Fp | 11 °C | | storage temp. | 0-6°C | | solubility | Soluble in acetone, ethanol, benzene, ether (Weast, 1986), and many other solvents including
methanol, propanol, and 2-butanone. | | Henry's Law Constant | 0.24 at 25 °C (static headspace-GC, Kawamoto and Urano, 1989) | | Exposure limits | No exposure limit is set for this compound. Carcinogen — Animal Limited Evidence (IARC). | | CAS DataBase Reference | 108-60-1 | | IARC | 3 (Vol. 41, Sup 7, 71) 1999 | | EPA Substance Registry System | Bis(2-chloro-1-methylethyl) ether (108-60-1) |
| | BIS(2-CHLOROISOPROPYL)ETHER Usage And Synthesis |
| Description | Bis-(2-chloroisopropyl) ether is a byproduct in the synthesis of ethylene and propylene glycol that has been found in municipal drinking water in the United States and waterways in the Netherlands where it is considered a persistent organic pollutant (POP). It is mutagenic in the S. typhimurium strains TA 1535 and TA 100 but lacks mutagenic activity in mice. | | Chemical Properties | Clear Colourless Oil | | Chemical Properties | Dichloroisopropyl ether is a colorless liquid. | | Physical properties | Colorless to light brown oily liquid. Verschueren (1983) reported an odor threshold concentration
of 320 ppb. | | Uses | Bis(2-chloroisopropyl)ether is used as a sol vent for resins, waxes, and oils, and inorganic synthesis. | | Uses | Apparently used as a nematocide in Japan but is not registered in the U.S. for use
as a pesticide. | | Uses | Bis(2-chloroisopropyl) Ether is an organochlorine pesticide. Bis(2-chloroisopropyl) Ether is used as a nematicide to control parasitic nematodes in agriculture. | | Definition | ChEBI: Bis(2-chloro-1-methylethyl)ether is an ether. | | General Description | Colorless to light brown liquid. Odor threshold concentration 200 μg/L. | | Air & Water Reactions | Subject to peroxidation in air. Insoluble in water. | | Reactivity Profile | BIS(2-CHLOROISOPROPYL)ETHER oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick 1979 p.151-154, 164]. | | Health Hazard | Bis(2-chloroisopropyl)ether exhibited moderately toxic and carcinogenic actions intest animals. The acute inhalation toxicity of this compound is considerably lowerthan those of bis(chloromethyl)ether and bis(chloroethyl)ether. Exposure to its vapors cancause irritation of the eyes and upper respiratory tract. Inhalation of 700 ppm of this com pound in air for 5 hours proved fatal to rats
The oral toxicity of bis(2-chloroisopropyl)ether in rats was found to be moderate, withan LD50 value of 240 mg/kg.
The compound is carcinogenic to animals.Although there is no evidence of its carcino genicity in humans, exposure may cause lungcancer. | | Fire Hazard | BIS(2-CHLOROISOPROPYL)ETHER is combustible. | | Potential Exposure | BCIE was previously used as a solvent
and as an extractant. It may be formed as a by-product of
propylene oxide production. It has been found in industrial
waste water and in natural water. | | First aid | If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least20 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit. | | Source | No MCLGs or MCLs have been proposed, however, a DWEL of 1
mg/L was recommended (U.S. EPA, 2000).
A waste by-product in the manufacture of propylene glycol (quoted, Verschueren, 1983). | | Environmental Fate | Biological. When bis(2-chloroisopropyl)ether (5 and 10 mg/L) was statically incubated
in the dark at 25°C with yeast extract and settled domestic wastewater inoculum, complete
biodegradation was achieved after 14 days (Tabak et al., 1981).
Chemical/Physical. Kollig (1993) reported that bis(2-chloroisopropyl)ether is subject
to hydrolysis forming hydrochloric acid and the intermediate (2-hydroxy-isopropyl-2-
chloroisopropyl)ether. The latter undergoes further hydrolysis yielding bis | | storage | Color Code—Blue: Health Hazard/Poison:Store in a secure poison location. Ethers tend to formunstable peroxides. Before entering confined space whereBCIE may be present, check to make sure that an explosiveconcentration does not exist. Store in tightly closed containers in a cool, well-ventilated area away from oxidizingmaterials. Metal containers involving the transfer of thischemical should be grounded and bonded. Where possible,automatically pump liquid from drums or other storage containers to process containers. Drums must be equipped withself-closing valves, pressure vacuum bungs, and flamearresters. Use only nonsparking tools and equipment, especially when opening and closing containers of this chemical.Sources of ignition, such as smoking and open flames,are prohibited where this chemical is used, handled, orstored in a manner that could create a potential fire orexplosion hazard. | | Shipping | UN2490 Dichloroisopropyl ether, Hazard Class:
6.1; Labels: 6.1—Poisonous materials. | | Incompatibilities | Incompatible with oxidizers (chlorates,
nitrates, peroxides, permanganates, perchlorates, chlorine,
bromine, fluorine, etc.); contact may cause fires or explosions.
Keep away from alkaline materials, strong bases,
strong acids, oxoacids, epoxides. It may form dangerous
peroxides upon standing; may explode when heated. | | Waste Disposal | Use special incinerator due to
high HCl content, such as seagoing incinerator ships. |
| | BIS(2-CHLOROISOPROPYL)ETHER Preparation Products And Raw materials |
|