- 2-Isocyanatoethyl Acrylate
-
- $8.00 / 1KG
-
2024-03-29
- CAS:13641-96-8
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: g-kg-tons, free sample is available
|
| 2-Isocyanatoethyl Acrylate Basic information |
Product Name: | 2-Isocyanatoethyl Acrylate | Synonyms: | 2-IsocyanatoethylAcrylate;2-Propenoic acid 2-isocyanatoethyl ester;2-isocyanatoethyl prop-2-enoate;2-Isocyanatoethyl Acrylate (stabilized with BHT);2-IsocyatoethylAcrylate;2-IsocyanatoethylAcrylate(stabilizedwithBHT)>2-(Acryloyloxy)ethyl Isocyanate;Acrylic Acid 2-Isocyanatoethyl Ester | CAS: | 13641-96-8 | MF: | C6H7NO3 | MW: | 141.12 | EINECS: | 482-140-6 | Product Categories: | | Mol File: | 13641-96-8.mol | |
| 2-Isocyanatoethyl Acrylate Chemical Properties |
Melting point | -25 °C | Boiling point | 80-95 °C(Press: 15 Torr) | density | 1.05 | vapor pressure | 21.4Pa at 20℃ | refractive index | 1.4470 to 1.4510 | Fp | 97°C(lit.) | storage temp. | Keep in dark place,Inert atmosphere,2-8C | form | clear liquid | color | Colorless to Almost colorless | Specific Gravity | 1.10 | EPA Substance Registry System | 2-Propenoic acid, 2-isocyanatoethyl ester (13641-96-8) |
RIDADR | UN 2206 6.1/PG III | HazardClass | 6.1 | PackingGroup | III | HS Code | 2929100090 |
| 2-Isocyanatoethyl Acrylate Usage And Synthesis |
Uses | 2-Isocyanatoethyl Acrylate is an important compound intermediate commonly used in chemical research and development as an API for organic synthesis. | Synthesis | 2-Isocyanatoethyl Acrylate is prepared by the reaction of phosgene, ethanolamine and 2-chloropropionyl chloride. The steps are as follows: In a 500 mL four-necked flask equipped with a stirrer, condenser, thermometer and inner tube, 250 mL of toluene and 25 g (0.41 mol) of 2-aminoethanol were added, heated to 90° C. and supplied with about 20 g of hydrogen chloride gas. Then 56 g (0.44 mol) of 3-chloropropionic acid chloride was added dropwise over 90 minutes and heated at 90° C. for 1 hour. Thereafter, 80 g (0.81 mol) of phosgene was supplied. Dissolved phosgene was then removed by nitrogen gas bubbling. Subsequently, 0.4 g of phenothiazine and 0.4 g of 2,6-bis-t-butylhydroxytoluene were added, and 50 g of triethylamine (0.49 mol) was supplied, and the mixture was heated and stirred at 50° C. for 6 hours. Thereafter, the mixture was cooled to room temperature, the formed hydrochloride salt was filtered, and toluene was distilled off. By the above process, Mixture 2 containing the main product of 2-acryloyloxyethyl isocyanate (AOI) 55 g (0.35 mol) (87% yield) and the by-product of 2-acryloyloxyethyl acrylate (2547 ppm by mass) was obtained.
|
| 2-Isocyanatoethyl Acrylate Preparation Products And Raw materials |
|