Product Identification | Back to Contents | 【Product Name】
2-(Diethylamino)ethyl methacrylate | 【Synonyms】
2-(Diethylamino)ethyl methacrylate 2-Diethylaminoethyl methacrylate beta-(Diethylamino)ethyl methacrylate beta-(N,N-Diethylamino)ethyl methacrylate Diethylaminoethyl methacrylate N,N-Diethylaminoethyl methacrylate | 【CAS】
105-16-8 | 【Formula】
C10H19NO2 | 【Molecular Weight】
185.26 | 【EINECS】
203-275-7 | 【RTECS】
OZ4150000 | 【RTECS Class】
Other | 【Beilstein/Gmelin】
1761794 | 【Beilstein Reference】
4-04-00-01477 | 【EC Index Number】
607-127-00-6 | 【EC Class】
Harmful; Irritant; Sensitising |
Physical and Chemical Properties | Back to Contents | 【Appearance】
A clear light colored liquid. | 【Boiling Point】
62 - 63 (1 torr) | 【Density】
0.918 g/cm3 (20 C) | 【Usage】
Proposed for or used in manufacture of graft polymers, hair sprays, dental materials, treatment of synthetic pelts, preparation of copolymers for waste water purification. | 【Refractive Index】
1.444 (20 C) |
First Aid Measures | Back to Contents | 【Ingestion】
Significant systemic toxicity is not expected after acute ingestion; gastrointestinal decontamination is generally not warranted. | 【Inhalation】
If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention. | 【Skin】
Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician should examine the area if irritation or pain persists. | 【Eyes】
Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility. |
Handling and Storage | Back to Contents | 【Storage】
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage. | 【Handling】
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. |
Hazards Identification | Back to Contents | 【Inhalation】
Respiratory depression, pulmonary edema, emphysema, and atelectasis have occurred in animals following large doses. | 【Skin】
Allergic contact dermatitis has been reported. Eczematous reactions of onychial and paronychial tissues have been reported in patients using acrylic plastic nails. Dystrophic nail changes may persist for months. Irreversible loss of the fingernails has occurred. | 【Ingestion】
Anorexia and nausea has been reported from inhalational exposure. Stomatitis has resulted from contact. Administration to rats by lavage failed to produce gastric lesions. |
Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Suitable protective clothing and self-contained resp protective apparatus should be available for use of those who may have to rescue persons overcome by fumes. | 【Respirators】
Use NIOSH/MSHA approved respirator appropriate for exposure of concern. | 【Exposure Effects】
Paresthesia have been reported. Headache, irritability, drowsiness and dizziness may occur. There is no evidence of methyl methacrylate-induced teratogenicity in humans but there are conflicting reports in animals. |
Fire Fighting Measures | Back to Contents | 【Fire Fighting】
Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use foam, dry chemical, or carbon dioxide. Keep run-off water out of sewers and water sources. |
Stability and Reactivity | Back to Contents | 【Stability】
No data. | 【Incompatibilities】
Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products Incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides Flammable gaseous hydrogen is generated in combination with strong reducing agents, such as hydrides. |
|
Company Name: |
Hubei Honghan Biotech Co., Ltd |
Tel: |
0719-0719-7199239 15675290733 |
Fax: |
|
WebSite: |
https://www.chemicalbook.com/ShowSupplierProductsList1901393/0.htm |
Company Name: |
J & K SCIENTIFIC LTD. |
Tel: |
010-82848833 400-666-7788 |
Fax: |
86-10-82849933 |
WebSite: |
http://www.jkchemical.com |
|