| Physical and Chemical Properties | Back to Contents | 【Appearance】
White solid. A complex combination produced in mammary tissue from amino acids supplied by the blood. | 【Melting Point】
280 | 【Density】
1.25 g/cm3 (20 C) | 【Usage】
Substance is used in the production of molded plastics, adhesives, paints, textile finishes, paper coatings, man-made fibers. |
| First Aid Measures | Back to Contents | 【Ingestion】
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid. | 【Inhalation】
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear. | 【Skin】
Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse. | 【Eyes】
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. If irritation develops, get medical aid. |
| Handling and Storage | Back to Contents | 【Storage】
Store in a tightly closed container. Keep from contact with oxidizing materials. Storage under a nitrogen blanket has been recommended. | 【Handling】
Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. |
| Hazards Identification | Back to Contents | 【Ingestion】
Ingestion of large amounts may cause gastrointestinal irritation. | 【Inhalation】
May cause respiratory tract irritation. Low hazard for usual industrial handling. | 【Skin】
May cause skin irritation. Low hazard for usual industrial handling. | 【Eyes】
Dust may cause mechanical irritation. |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin. | 【Respirators】
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. | 【Poison Class】
- |
| Fire Fighting Measures | Back to Contents | 【Fire Fighting】
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. This material in sufficient quantity and reduced particle size is capable of creating a dust explosion. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation. |
| Stability and Reactivity | Back to Contents | 【Stability】
Stable at room temperature in closed containers under normal storage and handling conditions. | 【Incompatibilities】
Strong oxidizers. | 【Decomposition】
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and gases, carbon dioxide. |
|
|