Titancarbid Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
GRAUES KRISTALLINES PULVER.
PHYSIKALISCHE GEFAHREN
Staubexplosion der pulverisierten oder granulierten Substanz in Gemischen mit Luft möglich.
CHEMISCHE GEFAHREN
Zersetzung bei Kontakt mit Funken unter Feuer- und Explosionsgefahr.
ARBEITSPLATZGRENZWERTE
TLV nicht festgelegt (ACGIH 2005).
MAK nicht festgelegt (DFG 2005).
AUFNAHMEWEGE
Aufnahme in den Körper durch Inhalation.
INHALATIONSGEFAHREN
Verdampfung bei 20°C vernachlässigbar; eine gesundheitsschädliche Partikelkonzentration in der Luft kann jedoch beim Dispergieren schnell erreicht werden.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: Die Substanz reizt die Atemwege.
WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION
Risiko der Lungenschädigung bei wiederholter oder längerer Exposition gegenüber Staubpartikeln.
LECKAGE
Verschüttetes Material in Behältern sammeln; falls erforderlich durch Anfeuchten Staubentwicklung verhindern. An sicheren Ort bringen. Persönliche Schutzausrüstung: Atemschutzgerät, P2-Filter für schädliche Partikel.
S-Sätze Betriebsanweisung:
S16:Von Zündquellen fernhalten - Nicht rauchen.
S22:Staub nicht einatmen.
Chemische Eigenschaften
Extremely hard, crystalline solid with
gray metallic color. Resistivity 60 μΩ?cm (room temperature). Insoluble
in water; soluble in nitric acid and aqua regia.
Physikalische Eigenschaften
Gray crystals. Superconducting
at 1.1 K. Soluble in HNO and 3
aqua regia. Resistant to oxidation
in air up to 450°C. Maximum
operating temperature 3000°C in
helium. Crucible container for
handling molten metals such as
Na, Bi, Zn, Pb, Sn, Bi, Rb, and Cd.
Corroded by liquid metals Mg,
Al, Si, Ti, Zr, V, Nb, Ta, Cr, Mo,
Mn, Fe, Co, and Ni. Attacked by
molten NaOH.
Verwenden
Titanium carbide is used in the manufacture of wear-resistant tools, cutting tools, As a coating for abrasive steel bearings, In the form of nano titanium carbide ceramic in optics applications, Enhance the conductivity of materials and as a nucleating agent.
Industrielle Verwendung
Titanium carbide in a molybdenum and nickelmatrix is formulated for high-temperature service.Tensile and compressive strengths, hardness,and oxidation resistance are high at1093°C. Critical parts for welding and thermalmetalworking tools, valves, seals, and hightemperaturegauging equipment are made fromgrades of this RHM.
Titancarbid Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte