| Identification | More | [Name]
4-Vinylpyridine | [CAS]
100-43-6 | [Synonyms]
4-Ethenylpyridine
4-VINYLPYRIDINE
4VP
4-ethenyl-pyridin
4-Pyridylethylene
4-vinyl-pyridin
gamma-vinylpyridine
Pyridine, 4-vinyl-
Pyridine,4-ethenyl-
4-vinylpyridine monomer
Vinylpyridine,4-
4-Vinylpyridine, stabilized, 95%
4-Vinylpyridine, 96%, stab. with 100ppm hydroquinone
4-Vinylpyridine (stabilized with TBC)
4-Vinylpyridine, stabilized, 95+%
4-Vinylpyridine, 95%, stabilized
1-(4-Pyridinyl)ethene | [EINECS(EC#)]
202-852-0 | [Molecular Formula]
C7H7N | [MDL Number]
MFCD00006447 | [Molecular Weight]
105.14 | [MOL File]
100-43-6.mol |
| Chemical Properties | Back Directory | [Appearance]
dark brown to yellow liquid | [Melting point ]
<25 °C | [Boiling point ]
62-65 °C15 mm Hg(lit.)
| [density ]
0.989 | [vapor pressure ]
2.28hPa at 25℃ | [refractive index ]
n20/D 1.549(lit.)
| [Fp ]
125 °F
| [storage temp. ]
-20°C | [solubility ]
Chloroform, Methanol (Slightly) | [form ]
Liquid | [pka]
pK1:5.62(+1) (25°C) | [color ]
Clear colorless to yellow-brown | [Stability:]
Stable. Incompatible with strong acids, strong oxidizing agents. | [Water Solubility ]
29 G/L (20 ºC) | [BRN ]
104506 | [Exposure limits]
ACGIH: TWA 1 mg/m3
OSHA: TWA 2 mg/m3
NIOSH: IDLH 50 mg/m3; Ceiling 2 mg/m3 | [Contact allergens]
4-Vinyl pyridine was used as a monomer in polymer
chemistry and induced nonimmunological contact
urticaria and allergic contact dermatitis. No crossreactivity
is observed between pyridine derivatives. | [LogP]
1.36 at 20℃ | [CAS DataBase Reference]
100-43-6(CAS DataBase Reference) | [NIST Chemistry Reference]
Pyridine, 4-ethenyl-(100-43-6) | [EPA Substance Registry System]
100-43-6(EPA Substance) |
| Safety Data | Back Directory | [Hazard Codes ]
T | [Risk Statements ]
R10:Flammable.
R25:Toxic if swallowed.
R34:Causes burns.
R42/43:May cause sensitization by inhalation and skin contact .
R23/25:Toxic by inhalation and if swallowed . | [Safety Statements ]
S23:Do not breathe gas/fumes/vapor/spray (appropriate wording to be specified by the manufacturer) .
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S16:Keep away from sources of ignition-No smoking . | [RIDADR ]
UN 3073 6.1/PG 2
| [WGK Germany ]
3
| [RTECS ]
UU1045000
| [F ]
8-10 | [TSCA ]
Yes | [HazardClass ]
6.1 | [PackingGroup ]
II | [HS Code ]
29333990 | [Hazardous Substances Data]
100-43-6(Hazardous Substances Data) |
| Hazard Information | Back Directory | [Description]
4-vinylpyridine (4VP) is a pyridine derivative with a vinyl group in the 4-position. It is a colorless liquid, although impure samples are often brown. This compound belongs to a class of polar vinyl monomers that are important in many applications due to the ability of their polymers to form complexes of the electron-rich pyridine ring and to form polyelectrolytes through protonation or quaternization with alkyl or aryl halides. 4VP is sometimes used in biochemistry to alkylate protein cysteine residues. When compared to other alkylation agents, such as iodoacetamide, acrylamide, and N-ethylmaleimide, 4VP is less reactive, meaning the completion rate of cysteine alkylation is lower, but it also yields fewer side reactions[1]. | [Chemical Properties]
dark brown to yellow liquid. 2.9g can be dissolved in 100g of water at 20℃, soluble in methanol, ether, benzene, acetone, and slightly soluble in ether. When exposed to light and heat, polymerization occurs, and 0.1%-0.2% hydroquinone is often added as a polymerization inhibitor during storage. | [Uses]
4-Vinylpyridine acts as a co-monomer in styrene-butadiene polymers to promote adhesion between the rubber compound and supporting fibers (or cords) in tires, belts and hoses. It serves as an intermediate for manufacturing chemicals and pharmaceuticals. Further, it is used as a reagent for the modification of cysteine. In addition to this, it is used to make poly(4-vinylpyridine) and elastomers. | [Application]
4-Vinyl pyridine was used as a monomer in polymer chemistry and induced nonimmunological contact urticaria and allergic contact dermatitis. No crossreactivity is observed between pyridine derivatives. | [Preparation]
4-Vinylpyridine is synthesized by reacting 4-picoline with formaldehyde to generate 4-pyridineethanol, which is then dehydrated. | [Flammability and Explosibility]
Flammable | [Purification Methods]
6 2 . Purify the monomer by fractional distillation under a good vacuum and in a N2 atmosphere and store it in sealed ampoules under N2, and keep it in the dark at -20o. The picrate has m 175-176o. [UV: Coleman & Fuoss J Am Chem Soc 77 5472 1955, Overberger et al. J Polymer Sci 27 381 1958, Petro & Smyth J Am Chem Soc 79 6142 1957.] It is used for alkylating SH groups in peptides [Anderson & Friedman Can J Biochem 49 1042 1971, Cawins & Friedman Anal Biochem 35 489 1970]. [Beilstein 20 II 170, 20 III/IV 2887, 20/6 V 213.] | [References]
[1] Baskaran, D. and A. Müller. “Anionic Polymerization of Polar Vinyl Monomers.” (2012): 623-655
|
|
|