| Identification | More | [Name]
Tetraethylammonium tetrafluoroborate | [CAS]
429-06-1 | [Synonyms]
TETRAETHYLAMMONIUM FLUOROBORATE
TETRAETHYLAMMONIUM TETRAFLUOROBORATE
TETRAETHYLAMMONIUM TETRAFLUOROBORATE, EL ECTROCHEM. GRADE
TETRAETHYLAMMONIUM TETRAFLUOROBORATE, 99 %
Ethanaminium, N,N,N-triethyl-, tetrafluoroborate(1-)
Tetraethylammonium tetrafluoroborate 99%
Tetraethylazanium tetrafluoroborate
Tetraethylaminium·tetrafluoroboronanion
Tetraethylammonium·tetrafluoroboronanion | [EINECS(EC#)]
207-055-1 | [Molecular Formula]
C8H20BF4N | [MDL Number]
MFCD00011827 | [Molecular Weight]
217.06 | [MOL File]
429-06-1.mol |
| Chemical Properties | Back Directory | [Appearance]
white crystals or crystalline powder | [Melting point ]
≥300 °C(lit.)
| [density ]
1.23 at 20℃ | [vapor pressure ]
0-0Pa at 20-25℃ | [storage temp. ]
Store below +30°C. | [solubility ]
acetonitrile: 0.1 g/mL, clear, colorless
| [form ]
Crystals or Crystalline Powder | [color ]
White | [Water Solubility ]
Soluble in water, alcohol and acetonitrile. | [Sensitive ]
Hygroscopic | [BRN ]
3917638 | [InChIKey]
VDMMJVHZGWXBJN-UHFFFAOYSA-M | [LogP]
-3.5 at 20.2℃ and pH7 | [Surface tension]
72.07mN/m at 1g/L and 20℃ | [CAS DataBase Reference]
429-06-1(CAS DataBase Reference) | [EPA Substance Registry System]
Ethanaminium, N,N,N-triethyl-, tetrafluoroborate(1-) (429-06-1) |
| Safety Data | Back Directory | [Hazard Codes ]
Xn,Xi | [Risk Statements ]
R20/21/22:Harmful by inhalation, in contact with skin and if swallowed .
R36/37/38:Irritating to eyes, respiratory system and skin . | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36:Wear suitable protective clothing . | [RIDADR ]
2811 | [WGK Germany ]
3
| [Hazard Note ]
Irritant/Hygroscopic | [TSCA ]
Yes | [HazardClass ]
6.1 | [PackingGroup ]
III | [HS Code ]
29239000 |
| Hazard Information | Back Directory | [Chemical Properties]
white crystals or crystalline powder | [Uses]
Tetraethylammonium Tetrafluoroborate is used in the preparation of some organic salts of fluoboric acids. | [General Description]
| [Purification Methods]
Dissolve the salt in hot MeOH, filter and add Et2O. It is soluble in ethylene chloride [Thompson & Kraus J Am Chem Soc 69 1016 1947, Wheeler & Sandstadt 77 2025 1955]. It has also been recrystallised three times from a mixture of ethyl acetate/hexane (5:1) or MeOH/pet ether, then stored at 95o for 48hours under vacuum [Henry & Faulkner J Am Chem Soc 107 3436 1985, Huang et al. Anal Chem 58 2889 1986]. It is used as a supporting electrolyte. [Beilstein 4 IV 333.] |
|
|