| Identification | Back Directory | [Name]
Potassium hydride | [CAS]
7693-26-7 | [Synonyms]
KH
PotassiuM hydrid
POTASSIUM HYDRIDE
potassiumhydride(kh)
Potassium monohydride
Potassium hydride (KH)
Hydrogen potassium salt
Potassiumhydride,30-35%inoil
PotassiuM hydride in paraffin
Potassium hydride, 20-25% in oil
POTASSIUM HYDRIDE 30% MINERAL OIL
Potassiumhydrideinoilslurrygraypowder
POTASSIUMHYDRIDE,30-35%(W/W)INMINERALOIL
PotassiuM hydride, 30% w/w in Mineral oil
Potassium hydride, 30 wt. % in mineral oil
POTASSIUM HYDRIDE, ~35% DISPERSION IN MI NERAL OIL
POTASSIUM HYDRIDE, 30 WT. % DISPERSION I N MINERAL OIL
Potassium hydride,20-25 wt.% dispersion in mineral oil
Potassium hydride, 25 to 35 wt.%, dispersion in mineral oil
PotassiuM hydride, 25 to 35 wt.%, dispersion in Mineral oil 25GR
PotassiuM hydride, 25 to 35 wt.%, dispersion in Mineral oil 100GR | [EINECS(EC#)]
231-704-8 | [Molecular Formula]
HK | [MDL Number]
MFCD00011357 | [MOL File]
7693-26-7.mol | [Molecular Weight]
40.11 |
| Chemical Properties | Back Directory | [Appearance]
dispersion of tan powder in mineral oil | [Melting point ]
decomposes [CRC10] | [Boiling point ]
316 °C
| [density ]
1.54
| [Fp ]
113 °C | [storage temp. ]
Flammables + water-Freezer (-20°C)e area | [solubility ]
Insoluble in benzene, diethyl ether and carbon disulfide. | [form ]
dispersion (in mineral oil (~35%))
| [color ]
Grayish beige | [Water Solubility ]
decomposed by H2O [CRC10] | [Sensitive ]
Moisture Sensitive | [InChIKey]
NTTOTNSKUYCDAV-UHFFFAOYSA-N | [Uses]
Organic condensations and alkylations.
| [EPA Substance Registry System]
Potassium hydride (KH) (7693-26-7) |
| Hazard Information | Back Directory | [Chemical Properties]
dispersion of tan powder in mineral oil | [Health Hazard]
Potassium hydride react with the moisture on skin and other
tissues to form highly corrosive sodium and potassium hydroxide. Contact of these
hydrides with the skin, eyes, or mucous membranes causes severe burns; thermal
burns may also occur due to ignition of the liberated hydrogen gas. | [Fire Hazard]
Potassium hydride is flammable solid that ignite on contact
with moist air. Potassium hydride presents a more serious fire hazard than sodium
hydride. The mineral oil dispersions do not ignite spontaneously on exposure to the
atmosphere. Sodium hydride and potassium hydride fires must be extinguished with
a class D dry chemical extinguisher or by the use of sand, ground limestone, dry clay
or graphite, or "Met-L-X ? " type solids. Water or CO 2 extinguishers must never be
used on sodium and potassium hydride fires. | [Hazard]
Dangerous fire and explosion risk, evolves
toxic and flammable gases on heating and on expo-
sure to moisture.
| [Definition]
potassium hydride: A white orgreyish white crystalline solid, KH;r.d. 1.43–1.47. It is prepared by passinghydrogen over heated potassiumand marketed as a light grey powderdispersed in oil. The solid decomposeson heating and in contact withmoisture and is an excellent reducingagent. Potassium hydride is a firehazard because it produces hydrogenon reaction with water. | [Reactions]
Potassium hydride acts as a base and as hydride donor. It is used for deprotonation, cyclization-condensation, elimination, and rearrangement reactions, and also as a reducing agent. Potassium hydride undergoes reaction quickly and quantitatively with acids, and of particular note is its capability to rapidly deprotonate tertiary alcohols where sodium hydride or potassium metal do so slowly or not at all. The reactions of metal hydrides take place at the crystal surface. The crystal lattice energies decrease from lithium to cesium hydride, and potassium hydride appears to have the optimal lattice energy and hydride radius for surface reactions. The presence of 18-crown-6 enhances the reactivity of potassium hydride, The crown ether can operate as a phase-transfer agent or as a simple “pickling” agent of the potassium hydride surface, dissolving the formed inorganic salts. Potassium hydride is usually superior to lithium and sodium hydride in the reactions. Unusually active potassium hydride can be prepared easily from hydrogen and superbasic reagents (t-BuOK-TMEDA) in hexane. “Superactive potassium hydride” is very active in deprotonation as well as in reduction. The reactivity of commercially available potassium hydride, which is prepared by the reaction of hydrogen gas with elemental potassium, depends upon the impurities in different lots (mainly potassium or its reaction products), thus leading to side reactions and variable yields. The superactive metal hydride contains no alkali metal. | [General Description]
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here. | [Flammability and Explosibility]
Potassium hydride and sodium hydride are flammable solids that ignite on contact
with moist air. Potassium hydride presents a more serious fire hazard than sodium
hydride. The mineral oil dispersions do not ignite spontaneously on exposure to the
atmosphere. Sodium hydride and potassium hydride fires must be extinguished with
a class D dry chemical extinguisher or by the use of sand, ground limestone, dry clay
or graphite, or "Met-L-X?" type solids. Water or CO2 extinguishers must never be
used on sodium and potassium hydride fires. | [storage]
Safety glasses, impermeable gloves, and a fire-retardant laboratory
coat should be worn at all times when working with these substances. These
hydrides should be used only in areas free of ignition sources and should be stored
preferably as mineral oil dispersions under an inert gas such as argon. | [Incompatibilities]
Potassium hydride and sodium hydride react violently with water, liberating
hydrogen, which can ignite. Oil dispersions of these hydrides are much safer to
handle because the mineral oil serves as a barrier to moisture and air. Potassium
hydride may react violently with oxygen, CO, dimethyl sulfoxide, alcohols, and
acids. Explosions can result from contact of these compounds with strong oxidizers.
Potassium hydride is generally more reactive than sodium hydride. | [Waste Disposal]
Excess potassium or sodium hydride and waste material containing these substances should be placed in an
appropriate container under an inert atmosphere, clearly labeled, and handled according to your institution's
waste disposal guidelines. Experienced personnel can destroy small quantities of sodium hydride and
potassium hydride by the careful dropwise addition of t-butanol or iso-propanol to a suspension of the
metal hydride in an inert solvent such as toluene under an inert atmosphere such as argon. Great care must
be taken in the destruction of potassium hydride because of its greater reactivity. The resulting mixture of
metal alkoxide should be placed in an appropriate container, clearly labeled, and handled according to your
institution's waste disposal guidelines. |
| Safety Data | Back Directory | [Hazard Codes ]
F,C | [Risk Statements ]
11-14/15-34 | [Safety Statements ]
16-26-27-36/37/39-45-43 | [RIDADR ]
UN 1409 4.3/PG 1
| [WGK Germany ]
3
| [Autoignition Temperature]
Ignites spontaneously at room temperature in moist air | [TSCA ]
Yes | [HazardClass ]
4.3 | [PackingGroup ]
I | [HS Code ]
28500090 | [Safety Profile]
Dangerous fire hazard
by chemical reaction. Ignites spontaneously
in air. Moderate explosion hazard when
exposed to heat or by chemical reaction.
Wdl react with water, steam, or acids to
produce H2 which then igmtes. Can react
vigorously with oxidizing materials. To fight
fire, use CO2, dry chemical. Potentially
explosive reactions with 0-2,4-
dnitrophenylhydroxylamine, fluoroalkenes.
Ignites on contact with air, oxygen +
moisture, fluorine. Incompatible with Cl2,
acetic acid, acrolein, acrylonitrile, (CaC +
Cl2), ClO2, (H202 + Cl2), (CHFL +
CH,OH), 1,2-dchloroethylene, maleic
anhydride, (n-methyl-n-nitrosourea +
CH2Cl2), nitroethane, NCb, nitromethane,
nitroparaffins, o-nitrophenol, nitropropane,
n-nitrosomethylurea, (nitrosomethylurea +
CH2Cl2), H20, trichloroethylene,
tetrahydrofuran, tetrachlorethane. When
heated to decomposition it emits highly
toxic fumes of K2O. See also POTASSIUM
and HYDRIDES. |
|
| Company Name: |
Alfa Aesar
|
| Tel: |
400-6106006 |
| Website: |
http://chemicals.thermofisher.cn |
| Company Name: |
Energy Chemical
|
| Tel: |
021-021-58432009 400-005-6266 |
| Website: |
http://www.energy-chemical.com |
| Company Name: |
Maya High Purity Chemicals
|
| Tel: |
+86 (573) 82222445 (0)18006601000 452520369 |
| Website: |
www.chemicalbook.com/ShowSupplierProductsList15221/0.htm |
|