AXIS Axon Isolation Device, 150 μm

AXIS Axon Isolation Device, 150 μm 구조식 이미지
카스 번호:
상품명:
AXIS Axon Isolation Device, 150 μm
동의어(영문):
AXIS Axon Isolation Device, 150 μm
CBNumber:
CB64816892
분자식:
포뮬러 무게:
0
MOL 파일:
Mol file

AXIS Axon Isolation Device, 150 μm 속성

안전

AXIS Axon Isolation Device, 150 μm C화학적 특성, 용도, 생산

일반 설명

AXIS Axon Isolation Devices are tissue culture ready (TC) microfluidic tools that out-of-the-box enable researchers to easily isolate, observe, and test developing neurites. They are currently being offered in four different formats to provide test flexibility during investigation.

AX15010 consists of 10 units of AX150, an axon isolation device consisting of four wells, two channels, and a set of microgrooves. Two of the wells are interconnected by a channel on each side of the device. The microgrooves are located in the area between the two channels and their length is 150μm. Each microgroove is approximately 5μm in height by 10μm in width and are designed to allow neurite passage to traverse through while preventing cell bodies from flowing across the device. There are roughly 120 microgrooves in each AX150 device.

The AXIS Axon Isolation Devices have been shown to effectively isolate cell bodies from differentiating neurites for a variety of cell types (Taylor et al., 2005; Park et al., 2006; Liu et al., 2008; Yang, et al., 2009; Taylor et al., 2009) and will likely work with most neuronal cell type that can be successfully grown in tissue culture. Because the AXIS devices are made from an inert and non-toxic polymer, cultures grown within AXIS devices can be maintained for weeks at a time. (Chun et al., 1992; Shibayama et al., 1991). In addition, because the polymer used to fabricate the axon isolation devices is optically clear, cells cultured within the device can be imaged with high resolution microscopy, including live cell imaging, confocal, and differential interference microscopy (Taylor et al., 2005; Park et al., 2006; Liu et al., 2008; Yang, et al., 2009; Taylor et al., 2009).

The microfluidic design of the AXIS devices is highly conducive to generation of hydrostatic pressure, which can be selectively used to isolate a solution, as well as chemical targets of interest, on a designated side of the device (Park et al., 2006). In addition, immunocytochemistry (IHC) can also be performed within an AXIS Axon Isolation device and a protocol to do so is provided in the manual.

AXIS Axon Isolation Device, 150 μm 준비 용품 및 원자재

원자재

준비 용품


AXIS Axon Isolation Device, 150 μm 공급 업체

글로벌( 2)공급 업체
공급자 전화 이메일 국가 제품 수 이점
Sigma-Aldrich 021-61415566 800-8193336
orderCN@merckgroup.com China 51471 80

Copyright 2019 © ChemicalBook. All rights reserved