Copper oxychloride manufacturers and suppliers

Copper oxychloride suppliers

Properties

Density: 3.76-3.78 g/cm3

vapor pressure: 4.6Pa at 20℃

solubility: insoluble in H2O; soluble in acid solutions

form: Powder

color: pale green crystals, crystalline

Water Solubility: insoluble H2O; soluble acid [CRC10]

Surface tension: 72.2mN/m at 1.1mg/L and 20℃

Safety Information

Symbol(GHS): GHS05,GHS07

Signal word: Danger

Hazard statements: H302-H314

Precautionary statements: P280-P305+P351+P338-P310

Hazard Codes: C

Risk Statements: 22-34

Safety Statements: 26-36/37/39-45

RIDADR: UN 3261

Use

Copper-containing wastes can be concentrated through the use of ion exchange, reverse osmosis, or evaporators to the point where copper can be electrolytically removed and sent to a reclaiming firm. 916 Copper Oxychloride Details of copper recovery from a variety of industrial wastes have been published. If recovery is not feasible, the copper can be precipitated by the use of caustics and the sludge de posited in a chemical waste landfill. Recommendable methods: Precipitation, solidification, landfill, discharge to sewer, & incineration. Peer-review: Precipitate copper with alkali, filter, solidify precipitate. (Do not use ammonia as alkali). Cation exchange will allow recovery of copper. Eluate from cation exchanger can be passed through anion exchanger to remove (or reduce) naphthenic acid content. Exhausted ion exchange resins can be landfilled. (Peer-review conclusions of an IRPTC expert consultation)

You can find Copper oxychloride suppliers, manufacturers, and distributors from countries such as China, United States and the United Kingdom here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.