- Antimony tribromide
-
- $10.00 / 1KG
-
2021-10-19
- CAS:7789-61-9
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: 20 tons
- Antimony tribromide
-
- $15.00 / 1KG
-
2021-07-02
- CAS:7789-61-9
- Min. Order: 1KG
- Purity: 99%+ HPLC
- Supply Ability: Monthly supply of 1 ton
- Antimony tribromide
-
- $1.00 / 1kg
-
2019-07-06
- CAS:7789-61-9
- Min. Order: 1kg
- Purity: 99%
- Supply Ability: 100KG
|
| Antimony tribromide Basic information |
Product Name: | Antimony tribromide | Synonyms: | ANTIMONY TRIBROMIDE;ANTIMONY BROMIDE;ANTIMONY (III) BROMIDE;ANTIMONY(III) BROMIDE 99.99%;ANTIMONY(III) BROMIDE 99%;Antimonytribromideanhydrous;Antimonytribromide-anhydrous;Antimony(III)bromide,99.5%(metalsbasis) | CAS: | 7789-61-9 | MF: | Br3Sb | MW: | 361.47 | EINECS: | 232-179-8 | Product Categories: | metal halide | Mol File: | 7789-61-9.mol | |
| Antimony tribromide Chemical Properties |
Melting point | 97 °C | Boiling point | 280 °C | density | 4.15 g/mL at 25 °C(lit.) | vapor pressure | 1 mm Hg ( 94 °C) | refractive index | 1.74 | Fp | 280°C | solubility | Soluble in dilute hydrochloric acid, hydrobromic acid, carbon disulfide, alcohol, acetone, ammonia, benzene, chloroform. | form | Powder | color | White | Specific Gravity | 4.15 | Water Solubility | decomposed by H2O; soluble dilute HCl, HBr [HAW93] [MER06] | Sensitive | Moisture Sensitive | Merck | 14,706 | Exposure limits | ACGIH: TWA 0.5 mg/m3 NIOSH: IDLH 50 mg/m3; TWA 0.5 mg/m3 | Dielectric constant | 20.899999999999999 | CAS DataBase Reference | 7789-61-9(CAS DataBase Reference) | EPA Substance Registry System | Antimony tribromide (7789-61-9) |
| Antimony tribromide Usage And Synthesis |
Description | Antimony tribromide is a nonflammable, colorless to yellow crystalline solid. Molecular weight= 361.51.Boiling point= 288℃ at 749 mmHg; Freezing/Meltingpoint=96.6℃; Specific gravity= 4.148 at 23℃; Criticaltemperature= 904.5℃; Critical pressure= 5.67 MN/m2;Heat of vaporization= 53.2 kJ/mol at 560℃; Vaporpressure= ,0.075 mmHg at 23℃. Hazard Identification(based on NFPA-704 M Rating System): Health 3,Flammability 0, Reactivity 1. Soluble in water, forms anacid. | Chemical Properties | Yellow Crystalline Powder | Chemical Properties | Antimony tribromide is a nonflammable, colorless
to yellow crystalline solid dissolved in hydrobromic
acid. | Uses | Analytical chemistry, mordant, manufacturing antimony salts. | Uses | Antimony(III) bromide is used in the production of other antimony compounds, in chemical analysis, as a mordant, and in dyeing. It can be added to polymers such as polyethylene as a fire retardant. | General Description | Antimony tribromide is the yellow crystalline solid dissolved in hydrobromic acid. Antimony tribromide is decomposed by water giving an antimony oxide and hydrobromic acid. Antimony tribromide is corrosive to metals and tissue. Antimony tribromide is used to make other antimony compounds, in chemical analysis, and in dyeing. | Air & Water Reactions | Water slowly hydrolyzes antimony tribromide to form antimony (III) oxide and hydrobromic acid. The dry powdered oxide ignites on heating in air [Mellor Vol. 9 425.1939]. | Reactivity Profile | Acidic salts, such as ANTIMONY TRIBROMIDE, are generally soluble in water. The resulting solutions contain moderate concentrations of hydrogen ions and have pH's of less than 7.0. They react as acids to neutralize bases. These neutralizations generate heat, but less or far less than is generated by neutralization of inorganic acids, inorganic oxoacids, and carboxylic acid. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible. Many of these compounds catalyze organic reactions. | Hazard | Toxic. | Health Hazard | TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Reaction with water or moist air will release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. | Fire Hazard | Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Vapors may accumulate in confined areas (basement, tanks, hopper/tank cars etc.). Substance will react with water (some violently), releasing corrosive and/or toxic gases and runoff. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water. | Safety Profile | A poison. Corrosive to
skin, eyes, and mucous membranes.
Reaction with water liberates HBr and
antimony trioxide. Can cause severe burns.
See also ANTIMONY COMPOUNDS. | Potential Exposure | Antimony tribromide is used to make
antimony salts; in dyeing, and analytical chemistry. | First aid | If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seekmedical attention immediately. If this chemical contactsthe skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove fromexposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing hasstopped and CPR if heart action has stopped. Transferpromptly to a medical facility. When this chemical hasbeen swallowed, get medical attention. If victim is conscious, administer water or milk. Do not induce vomiting.Medical observation is recommended for 24°48 h afterbreathing overexposure, as pulmonary edema may bedelayed. As first aid for pulmonary edema, a doctor orauthorized paramedic may consider administering acorticosteroid spray. | storage | Color Code—Blue: Health Hazard/Poison: Store ina secure poison location. Prior to working with this chemicalyou should be trained on its proper handling and storage.Antimony Tribromide must be stored to avoid contact withpotassium, sodium, and bases (such as sodium hydroxide,potassium hydroxide, and ammonium hydroxide) since violent reactions occur. Store in tightly closed containers in acool, well-ventilated area away from water or moisture andheat. | Shipping | UN3141 Antimony compounds, inorganic, liquid,
n.o.s, Hazard Class: 6.1; Labels: 6.1-Poisonous materials,
Technical Name Required. | Incompatibilities | Contact with water reacts, liberating
antimony trioxide and hydrogen bromide. Dry trioxide
material may explode if heated air. Heat forms toxic bromides.
Antimony tribromide attacks various metals. | Waste Disposal | Encapsulate and bury at an
approved chemical landfill. Unacceptable for disposal at
sewage treatment plants. Consult with environmental regulatory
agencies for guidance on acceptable disposal practices.
Generators of waste containing this contaminant
(≥100 kg/mo) must conform with EPA regulations governing
storage, transportation, treatment, and waste disposal. |
| Antimony tribromide Preparation Products And Raw materials |
|