| Product Identification | Back to Contents | 【Product Name】
Perkadox L | 【Synonyms】
Benzoyl benzenecarboperoxoate
Benzoyl superoxide
Dibenzoyl peroxide | 【CAS】
94-36-0 | 【Formula】
C14H10O4 | 【Molecular Weight】
242.23 | 【EINECS】
202-327-6 | 【RTECS】
DM8575000 | 【RTECS Class】
Tumorigen; Mutagen; Primary Irritant | 【Merck】
13,1117 | 【Beilstein/Gmelin】
984320 | 【Beilstein Reference】
4-09-00-01052 | 【EC Index Number】
617-008-00-0 | 【EC Class】
Explosive; Irritant; Sensitising |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
White, odorless powder. | 【Solubility in water】
Insoluble | 【Melting Point】
103-106 | 【Boiling Point】
350 | 【Vapor Pressure】
5E-5 (25 C) | 【Density】
1.334 g/cm3 (20 C) | 【Partition Coefficient】
3.46 | 【Heat Of Vaporization】
59.4 kJ/mol | 【Heat Of Combustion】
-6550 kJ/mol | 【Usage】
Oxidizing agent in bleaching oils, flour, catalyst in the plastics industry, initiator in polymerization, source of free radicals for industrial processes. | 【Vapor Density】
8.4 | 【Odor threshold】
Odorless | 【Refractive Index】
1.543 (20 C) |
| First Aid Measures | Back to Contents | 【Ingestion】
DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. | 【Inhalation】
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used. | 【Skin】
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. | 【Eyes】
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. |
| Handling and Storage | Back to Contents | 【Storage】
Isolate in well-detached, fire-resistive, cool, well-ventilated building with no other materials included. Explosion venting. No electrical installations or heating facilities. Use original containers. | 【Handling】
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. |
| Hazards Identification | Back to Contents | 【Ingestion】
Abdominal pain. | 【Inhalation】
Coughing, sore throat. Irritates eyes, skin and respiratory tract. | 【Skin】
May cause severe injury or burns. | 【Eyes】
Inflammation of the eye may be noted from ocular exposure. | 【Hazards】
May explode from heat, shock, friction or contamination. May ignite combustibles (wood, paper, oil, clothing, etc.). May be ignited by heat, sparks or flames. May burn rapidly with flare-burning effect. Containers may explode when heated. Runoff may create fire or explosion hazard. | 【EC Risk Phrase】
R 2 36 43 | 【EC Safety Phrase】
S 3/7 14 36/37/39 | 【UN (DOT)】
2089 |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Wear appropriate protective gloves, clothing and goggles. | 【Respirators】
Wear positive pressure self-contained breathing apparatus (SCBA). | 【Exposure limit(s)】
TLV: ppm; 5 mg/m3 (as TWA) (ACGIH 1993-1994). MAK: ppm; 5 mg/m3; I (1992). MAK: class I (1992). OSHA PEL: TWA 5 mg/m3 NIOSH REL: TWA 5 mg/m3 NIOSH IDLH: 1500 mg/m3 | 【Poison Class】
5 |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
154 | 【Autoignition】
80 | 【Fire Fighting】
SMALL FIRES: Water spray or fog is preferred; if water not available use dry chemical, carbon dioxide or regular foam. LARGE FIRES: Flood fire area with water from a distance. Use water spray or fog; do not use straight streams. Move containers from fire area if you can do it without risk. Do not move cargo or vehicle if cargo has been exposed to heat. Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. | 【Fire Potential】
Very flammable. Decomposition vapors. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Keep combustibles (wood, paper, oil, etc.) away from spilled material. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Keep substance wet using water spray. Stop leak if you can do it without risk. SMALL SPILLS: Take up with inert, damp, noncombustible material using clean non-sparking tools and place into loosely covered plastic containers for later disposal. |
| Stability and Reactivity | Back to Contents | 【Incompatibilities】
May react violently with inorganic or organic acids, alcohols, amines, metallic naphthenates and polymerization accelerators (e.g., N,N-dimethylaniline) May react explosively or violently with dimethyl sulfide, lithium aluminum hydride and aniline. | 【Stability】
Unstable, spontaneously explosive when heated. Highly reactive. Extremely explosion-sensitive to shock, heat, friction. | 【Combustion Products】
Suffocating smoke evolved May explode |
|
| Company Name: |
Jinan Wald Chemical Co., Ltd. |
| Tel: |
0531-88773586 13210588999 |
| Fax: |
053188773586 |
| WebSite: |
https://www.chemicalbook.com/ShowSupplierProductsList1770979/0.htm |
|