| Product Identification | Back to Contents | 【Product Name】
1-Chloromethyl-4-methoxybenzene | 【Synonyms】
1-(Chloromethyl)-4-methoxybenzene
4-Methoxybenzyl chloride
p-(Chloromethyl)anisole | 【CAS】
824-94-2 | 【Formula】
C8H9ClO | 【Molecular Weight】
156.61000000000001 | 【EINECS】
212-540-6 | 【Beilstein/Gmelin】
606667 | 【Beilstein Reference】
4-06-00-02137 | 【EC Class】
corrosive |
| Physical and Chemical Properties | Back to Contents | 【Solubility in water】
Insoluble | 【Melting Point】
-1 | 【Boiling Point】
244 | 【Vapor Pressure】
0.05 (25 C) | 【Density】
1.072 g/cm3 (0 C) | 【Partition Coefficient】
2.4 | 【Heat Of Vaporization】
46.1 kJ/mol | 【Refractive Index】
1.55 (20 C) |
| First Aid Measures | Back to Contents | 【Ingestion】
Seek medical assistance. | 【Inhalation】
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. | 【Skin】
Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin. | 【Eyes】
Immediately flush with running water for at least 20 minutes. |
| Hazards Identification | Back to Contents | 【Ingestion】
See Inhalation. | 【Inhalation】
TOXIC; inhalation, ingestion, or skin contact with material may cause severe injury or death. Effects of contact or inhalation may be delayed. | 【Skin】
Contact with molten substance may cause severe burns to skin and eyes. See Inhalation. | 【Eyes】
See Inhalation. | 【Hazards】
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards. | 【EC Risk Phrase】
R 34 36 | 【EC Safety Phrase】
S 26 36/37/39 45 | 【UN (DOT)】
3265 |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
109 | 【Fire Fighting】
Small Fires: Dry chemical, carbon dioxide or water spray. Large Fires: Dry chemical, carbon dioxide, alcohol-resistant foam or water spray. | 【Fire Potential】
Combustible material: may burn but does not ignite readily. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
ELIMINATE all ignition sources. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS. |
|
| Company Name: |
J & K SCIENTIFIC LTD. |
| Tel: |
010-82848833 400-666-7788 |
| Fax: |
86-10-82849933 |
| WebSite: |
http://www.jkchemical.com |
|