ChemicalBook--->CAS DataBase List--->74-89-5

74-89-5

74-89-5 Structure

74-89-5 Structure
IdentificationMore
[Name]

METHYLAMINE
[CAS]

74-89-5
[Synonyms]

AKOS BBS-00004243
AMINE C1
AMINOMETHANE
MERCURIALIN
METHYLAMINE
METHYLAMINE METHANOL
MMA
MMA-40
MMA-50
MONOMETHYLAMINE
ai3-15637-x
Aminomethan
anhydrousmethylamine
Carbinamine
CH3NH2
Methanamine
Methylamin
methylamine(mono)
methylamine(non-specificname)
methylamine(solutions)
[EINECS(EC#)]

200-820-0
[Molecular Formula]

CH5N
[MDL Number]

MFCD00008104
[Molecular Weight]

31.06
[MOL File]

74-89-5.mol
Chemical PropertiesBack Directory
[Appearance]

Methylamine is a colorless gas with a fish- or ammonia-like odor; at low concentrations a fishy odor. Shipped as a liquefied compressed gas. The odor threshold is 3.2 ppm.
[Melting point ]

-93 °C(lit.)
[Boiling point ]

-6.3 °C(lit.)
[density ]

0.785 g/mL at 25 °C
[vapor density ]

1.08 (20 °C, vs air)
[vapor pressure ]

27 psi ( 20 °C)
[refractive index ]

n20/D 1.371
[Fp ]

61 °F
[storage temp. ]

Flammables area
[solubility ]

highly soluble in water (108g/100g) at 25°C; soluble in alcohol and miscible with ether; HCl salt is soluble in water and absolute alcohol; compound is insoluble in chloroform, acetone, ether, and ethyl acetate
[form ]

Gas
[pka]

10.63(at 25℃)
[Specific Gravity]

0.901 (20℃/4℃) (40% Soln.)
[PH]

14 (H2O, 20°C)
[Stability:]

Stable. Highly flammable. Note wide explosion limits. Incompatible with oxidizing agents, acids, alkalies, alkaline earth metals, copper and its alloys, zinc and its alloys.
[explosive limit]

4.9-20.8%
[Odor Threshold]

0.035ppm
[Water Solubility ]

Miscible with water, ethanol, benzene, acetone and ether.
[Merck ]

14,6014
[BRN ]

741851
[Henry's Law Constant]

(x 10-5 atm?m3/mol): 1.11 at 25 °C (Christie and Crisp, 1967)
[Dielectric constant]

10.0(18℃)
[Exposure limits]

TLV-TWA 10 ppm (~12.3 mg/m3)(ACGIH, MSHA, and OSHA); IDLH 100 ppm (NIOSH).
[LogP]

-0.570
[Uses]

Intermediate for accelerators, dyes, pharmaceuticals, insecticides, fungicides, surface active agents, tanning, dyeing of acetate textiles, fuel additive, polymerization inhibitor, component of paint removers, solvent, photographic developer, rocket propellent.
[CAS DataBase Reference]

74-89-5(CAS DataBase Reference)
[EPA Substance Registry System]

Methylamine (74-89-5)
Hazard InformationBack Directory
[Chemical Properties]

Methylamine is a colorless, fi sh-like smelling gas at room temperature. It is used in a variety of industries, such as the manufacture of dyestuffs, treatment of cellulose, acetate rayon, as a fuel additive, rocket propellant, and in leather tanning processes.
[General Description]

A colorless gas or a liquid. Pungent fishy odor resembling odor of ammonia. The liquid boils at 20.3°F hence vaporizes rapidly when unconfined. Vapors are heavier than air and may collect in low-lying areas. Easily ignited under most conditions. Under prolonged exposure to intense heat the containers may rupture violently and rocket. Used for making pharmaceuticals, insecticides, paint removers, surfactants, rubber chemicals.
[Reactivity Profile]

METHYLAMINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated in combination with strong reducing agents, such as hydrides.
[Air & Water Reactions]

Highly flammable. Very soluble in water; the solutions are strongly basic and therefore corrosive. Liquid fumes in air.
[Hazard]

(Gas and liquid) Dangerous fire risk. Explosive limits in air 5–21%. Strong irritant to tissue. Eye, skin and upper respiratory tract irritant.
[Health Hazard]

Exposures to methylamine are known to cause adverse health effects among occupational workers. The workers demonstrate symptoms of toxicity that include, but are not limited to, irritation to the eyes, nose, and throat. Studies have indicated that the compound causes injury to the eyes through corneal opacities and edema hemorrhages in the conjunctiva, and injury to the liver. Studies of Guest and Varma indicated no signifi cant deleterious effects on the internal organs or skeletal deformities in experimental mice
[Health Hazard]

Exposures to methylamine are known to cause adverse health effects among occupational workers. The workers demonstrate symptoms of toxicity that include, but are not limited to, irritation to the eyes, nose, and throat. Studies have indicated that the compound causes injury to the eyes through corneal opacities and edema hemorrhages in the conjunctiva, and injury to the liver. Studies of Guest and Varma indicated no signifi cant deleterious effects on the internal organs or skeletal deformities in experimental mice.
[Health Hazard]

VAPOR: Irritating to eyes, nose and throat. If inhaled will cause coughing or difficult breathing. LIQUID: Will burn skin and eyes.
[Potential Exposure]

Methylamine is used in organic synthesis; a starting material for N-oleyltaurine, a surfactant; and p-N-methylaminophenol sulfate, a photographic developer. It has possible uses in solvent extraction systems in separation of aromatics from aliphatic hydrocarbons. It is also used in the synthesis of many different pharmaceuticals; pesticides and rubber chemicals.
[Fire Hazard]

FLAMMABLE. POISONOUS GASES MAY BE PRODUCED IN FIRE. Containers may explode in fire. Flashback along vapor trail may occur. Vapor may explode if ignited in an enclosed area. Toxic nitrogen oxides may be formed. Vapors are heavier than air and may travel considerable distance to a source of ignition and flash back.
[First aid]

If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 minutes, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a medical facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit. Medical observation is recommended for 24 to 48 hours after breathing overexposure, as pulmonary edema may be delayed. As first aid for pulmonary edema, a doctor or authorized paramedic may consider administering a drug or other inhalation therapy.
[Shipping]

UN1061 Methylamine, anhydrous, Hazard Class: 2.1; Labels: 2.1-Flammable gas. UN1235 Methylamine, aqueous solution, Hazard Class: 3; Labels: 3-Flammable liquid, 8-Corrosive material. Cylinders must be transported in a secure upright position, in a well-ventilated truck. Protect cylinder and labels from physical damage. The owner of the compressed gas cylinder is the only entity allowed by federal law (49CFR) to transport and refill them. It is a violation of transportation regulations to refill compressed gas cylinders without the express written permission of the owner.
[Incompatibilities]

A medium-strong base. Reacts violently with strong acids; mercury, strong oxidizers; nitromethane. Corrosive to copper, zinc alloys; aluminum, and galvanized surfaces.
[Description]

Methylamine is a colorless gas with a fish- or ammonia-like odor; at low concentrations a fishy odor. Shipped as a liquefied compressed gas. The odor threshold is 3.2 ppm. Molecular weight= 31.07; Specific gravity (H2O:1)= 0.7 (liquid);Boiling point=6℃; Freezing/ Melting point=94℃; Relative vapor density (air= 1)= 1.08; Vapor pressure= 3 atm; Flash point=flammable gas; Autoignition temperature=430℃. Explosive limits: LEL= 4.9%; UEL= 20.7%. Hazard Identification (based on NFPA-704 M Rating System): Health 3, Flammability 4, Reactivity 0. Soluble in water.
[Waste Disposal]

Return refillable compressed gas cylinders to supplier. Controlled incineration (incinerator equipped with a scrubber or thermal unit to reduce nitrogen oxides emissions).
[Physical properties]

Colorless, flammable gas with a strong ammonia-like odor. An experimentally determined recognition odor threshold concentration of 21 ppbv was reported by Leonardos et al. (1969). Odor threshold concentrations of 4.7 ppmv and 35 ppbv were experimentally determined by Nishida et al. (1979) and Nagata and Takeuchi (1990), respectively.
[Definition]

A colorless flammable gas that smells like ammonia. It is the simplest primary amine, used for making herbicides and other organic chemicals.
[Definition]

ChEBI: The simplest of the methylamines, consisting of ammonia bearing a single methyl substituent.
[Definition]

methylamine: A colourless flammablegas, CH3NH2; m.p. –93.5°C; b.p.–6.3°C. It can be made by a catalyticreaction between methanol and ammoniaand is used in the manufactureof other organic chemicals.
[Production Methods]

Several methods are currently used for synthesis of methylamine. Virtually all produce a mixture of primary, secondary, and tertiary amines which can be continuously separated by distillation and extraction. The most commonly used synthesis involves heating ammonium chloride and methyl alcohol (ratio varies from 2:1 to 6:1, depending on desired ratio of amines) to about 300°C in the presence of a catalyst such as zinc chloride. Alternatively, methylamine can be synthesized by heating ammonium chloride and formaldehyde in the presence of H2 and a hydrogenation catalyst such as nickel or platinum. Methylamine is generally marketed as a liquid or a 33% aqueous solution (HSDB 1988).
[Industrial uses]

Methylamine and its hydrochloride salt are widely used in organic synthesis for introducing the methylamino group. In 1976, industrial consumption was 32,000 tons/year. One of its most important uses is in the preparation of amide-type surfactants. It is also used in the preparation of drugs such as adrenaline and synthetic caffeine. It serves as the base for more than twenty commercial products, among those included are photographic developers, insecticides, and antihistamine drugs (Beard and Noe 1981). It is also widely used in tanning and has been used in the separation of aromatics from aliphatic hydrocarbons (Sittig 1981).
[Carcinogenicity]

Methylamine was positive in the mouse lymphoma assay and negative in the Ames assay.
[Source]

Methylamine was detected in cauliflower (65 ppm), carrots (3,970 ppm), tea leaves (50 ppm), red and white cabbage (3.4 to 22.7 ppm), corn (27 ppm), kale leaves (16.6 ppm), barley seeds (4.5 ppm), epidermis of apples (4.5 ppm), celery (6.4 ppm), sweetflag, celandine, and tobacco leaves (Duke, 1992).
[Environmental Fate]

Photolytic. The rate constant for the reaction of methylamine and OH radicals in the atmosphere at 300 K is 1.3 x 10-13 cm3/molecule?sec (Hendry and Kenley, 1979).
Low et al. (1991) reported that the photooxidation of aqueous primary amine solutions by UV light in the presence of titanium dioxide resulted in the formation of ammonium and nitrate ions.
Chemical/Physical. In an aqueous solution, chloramine reacted with methylamine to form Nchloromethylamine (Isaac and Morris, 1983).
Reacts with acids forming water-soluble salts.
[Metabolism]

Methylamine is a normal body constituent in several species and is known to be generated endogenously from epinephrine (Schayer et al 1952) and creatine (Davis and DeRopp 1961). It has also recently been detected in the urine of male CBA/cA mice treated with N-methylformamide (Kestell et al 1985). Mammalian metabolism of methylamine is rapid yet the enzymes involved are not yet known. Simehnhoff (1975) suggested that methylamine is methylated to dimethylamine as it appeared not to be oxidized by amine oxidases yet was rapidly absorbed and not excreted in the urine. Dar et al (1985) conducted studies using methyl-[14C]- labeled methylamine injected i.p. into rats to assess the role of monoamine oxidase in the metabolism of methylamine in the rats. Methylamine underwent rapid oxidation as more than 30% of the 14C was recovered as 14CO2 in the first 2-6 h following exposure and 52% was expired in the first 24 h. Pretreatment of the rats with long acting monoamine oxidase inhibitors significantly inhibited methylamine metabolism, however short term inhibitors were without effect. Combinations of the drugs suggested that monoamine oxidase was not responsible for metabolism of methylamine and that a closely related enzyme such as methylamine oxidase, previously proposed by Werner and Seiber (1963), may be involved.
It has also been reported that intestinal microflora may degrade methylamine (Iyer and Kailio 1958). Dar et al (1985) found that pretreatment of rats with neomycin to reduce bacterial microorganisms resulted in only a slight inhibition of 14C expiration during the initial 6 h following methylamine administration. These results indicate that, at least in the rat, bacterial oxidation of methylamine in the intestine is negligible.
[storage]

Methylamine is stored in a cool, well-ventilated noncombustible area separatedfrom possible sources of ignition andoxidizing substances and mercury. Itssolutions are stored in a flammable liquidstorage room or cabinet. The gas is shippedin steel cylinders or tank cars; the liquid isshipped in steel drums or tank cars.
[Purification Methods]

Dry the amine with sodium or BaO. It is commercially available in metal cylinders. [Beilstein 4 IV 118.]
[Toxicity evaluation]

The corrosive nature of methylamine produces irritation effects at all points of contact which is largely responsible for its toxic actions. Using radiotracer techniques, labeled macromolecules were fragmented and the formaldehyde generated interacts with proteins in vivo suggesting a risk factor for initiation of endothelial injury and subsequent atherosclerosis. Increased semicarbazide-sensitive amine oxidase catalyzes the conversion of methylamine to formaldehyde and increased activity has been found in patients with diabetes mellitus, chronic heart failure, and cerebral infarct and is associated with obesity. The deamination of methylamine may contribute to protein deposition, the formation of plaques, and inflammation and be may be involved in the pathophysiology of chronic vascular and neurologic disorders such as diabetes, atherosclerosis, and Alzheimer’s disease.
Safety DataBack Directory
[Hazard Codes ]

F+,Xn,C,F,T
[Risk Statements ]

R12:Extremely Flammable.
R20:Harmful by inhalation.
R37/38:Irritating to respiratory system and skin .
R41:Risk of serious damage to eyes.
R34:Causes burns.
R20/22:Harmful by inhalation and if swallowed .
R11:Highly Flammable.
R39/23/24/25:Toxic: danger of very serious irreversible effects through inhalation, in contact with skin and if swallowed .
R36/37/38:Irritating to eyes, respiratory system and skin .
R23/24/25:Toxic by inhalation, in contact with skin and if swallowed .
[Safety Statements ]

S7:Keep container tightly closed .
S16:Keep away from sources of ignition-No smoking .
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37:Wear suitable protective clothing and gloves .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S29:Do not empty into drains .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S3/7:Keep container tightly closed in a cool place .
S3:Keep in a cool place .
S39:Wear eye/face protection .
S33:Take precautionary measures against static discharges .
[RIDADR ]

UN 3286 3/PG 2
[WGK Germany ]

2
[RTECS ]

PF6300000
[F ]

4.5-31
[Autoignition Temperature]

806 °F
[TSCA ]

Yes
[DOT Classification]

2.1 (Flammable gas)
[HazardClass ]

3
[PackingGroup ]

II
[HS Code ]

29211100
[Safety Profile]

Poison by subcutaneous route. Moderately toxic by inhalation. A severe skin irritant. Mutation data reported. A strong base. Flammable gas at ordinary temperature and pressure. Very dangerous fire hazard when exposed to heat, flame, or sparks. Explosive when exposed to heat or flame. To fight fire, stop flow of gas. Forms an explosive mixture with nitromethane. When heated to decomposition it emits toxic fumes of NOx. See also AMINES.
[Hazardous Substances Data]

74-89-5(Hazardous Substances Data)
[Toxicity]

LD50 orally in rats: 100-200 mg/kg (Kinney); LC50 in rats: 0.448 ml/l (Sarkar, Sastry)
[IDLA]

100 ppm
Raw materials And Preparation ProductsBack Directory
[Raw materials]

Trimethylamine-->o/p-Toluenesulfonamide
[Preparation Products]

N-Methylpentylamine-->fluorescent whitening agent AT-->Bonnecor-->N-(4-Methoxybenzyl)-N-methylamine-->3-CHLORO-N-METHYLBENZYLAMINE-->1,3-Dimethylurea-->N-Cyano-N'-methyl-ethanimidamide-->3,4,5-TRIMETHACARB-->Methoxyphenamine-->Methimazole-->(2-FLUOROBENZYL)METHYLAMINE-->Disperse Red 9-->BIFEMELANE-->sodium oleyl sarcosinate-->CHLOROMETHYLACETAMIDE-->N-Methyl-4-pyridinamine-->(4-FLUORO-BENZYL)-METHYL-AMINE-->3-METHOXY-N-METHYLBENZYLAMINE 97-->Rotenone-->2-Methoxy-N-methylbenzylamine hydrochloride ,97%-->4-Chloro-N-methylaniline-->3-Hydrazinyl-N-methylpropanamide-->2-CHLORO-N-METHYLACETOACETAMIDE-->1-Methyl-3-phenyl-2-thiourea-->additive AC1210-->2-AMINO-4-METHYLAMINO-6-ETHOXY-1,3,5-TRIAZINE-->1-Methyl-3-pyrrolidinol-->N-METHYLURETHANE-->(1H-IMIDAZOL-2-YLMETHYL)-METHYL-AMINE-->(3-FLUOROBENZYL)METHYLAMINE-->2-Hydrazinyl-N-methylacetamide-->N,N-DIMETHYL-4-[(METHYLAMINO)METHYL]ANILINE-->METHYL-(2-TRIFLUOROMETHYL-BENZYL)-AMINE-->didodecyl dimethyl ammoniumm-->Rilmazafone-->METHYL-PYRIDIN-2-YLMETHYL-AMINE-->Noncyanide zinc plating additive DE-->Zolpidem-->POLY DIMETHYL DIALLYL AMMONIUM CHLORIDE-->Methylchloroisothiazolinone/methylisothiazolinone mixture (MCIT/MIT)
Material Safety Data Sheet(MSDS)Back Directory
[msds information]

monomethylamine(74-89-5).msds
Questions And AnswerBack Directory
[Organic Chemicals]

Methylamine, also known as amino methane, is an important kind of organic chemical raw materials and intermediates and is a flammable colorless gas at normal temperature and pressure. Upon being liquefied or compressed at high concentrations, it has a strong odor of ammonia. It has fishy odor at very low concentrations. It is easily soluble in water and soluble in alcohol and ether. It is flammable and can form explosive mixtures with air with the explosive limit being 4.3% to 21%. It has weak alkalinity with the alkaline being stronger than ammonia. It can interact with inorganic acid to form water-soluble salts. It is obtained through the reaction between methanol and ammonia at high pressure and high temperature in the action of catalyst. Alternatively, it can be obtained through the reaction between formaldehyde and ammonium chloride upon being heated to 300 ℃ in the presence of zinc chloride. Methylamine can be used to make pesticides, pharmaceuticals, rubber vulcanization accelerator, dyes, explosives, leather, petroleum, surfactants, and ion exchange resin, paint strippers, and coatings as well as additives. It is an important raw material for the manufacturing of pesticide dimethoate, carbaryl, and chlordimeform. The inhalation toxicity of methylamine belongs to low toxicity category. The maximum allowable air concentration is 5mg/m3 (0.4ppm). It is corrosive and can cause irritation of the eyes, skin and mucous membranes. In case of fire, high heating temperature, it can cause risk of fire with cylinders and accessories damage being capable of causing an explosion.
[Poisoning]

Methylamine belongs to moderate-poisoning drug with a strong irritant and corrosive property. During the process of production and in transit, when there is leakage occurring due to accident, it can cause acute poisoning of contacted people.
This product can be subject to inhalation in its gaseous state from the respiratory tract. Its solution can be absorbed through the skin. Its salt can cause poisoning upon mistakenly oral administration. This product has a strong stimulating effect on eye; upper respiratory tract, skin and mucous membranes. Inhalation of it at high concentrations can cause damage to the lungs with people in severe cases getting pulmonary edema and respiratory distress syndrome, finally leading to death. However, it has been no yet reported of cases of systemic poisoning around the world. Liquid methylamine has strong irritation and corrosion effect and can cause eye and skin chemical burning. In case of 40% aqueous methylamine being splashed into the eyes, the victims can get burning eyes, photophobia, lacrimation, conjunctival hyperemia, eyelid irritation, corneal edema and superficial ulcers with those symptoms being able to last 1 to 2 weeks. Long-term exposure to low concentrations of methylamine can cause dryness and discomfort of the eyes, nose, and throat.
[first-aid]
Upon skin contact, the victim should immediately remove the contaminated clothing, wash it thoroughly with a large amount of flowing water. For first-aid, the victim can apply 1 to 2% acetic acid, 0.5% citric acid to wash the skin, mucous membranes and mouth.
When the eyes are contaminated, they should raise the eyelid and wash the eyes with flowing clean water and saline for at least 15 minutes, followed by fluorescein staining. If there is corneal injury occurring, the victims should be invited to an ophthalmologist for treatment.
For patients inhaling nitric methylamine gas and getting poisoned, they should be rapidly transferred from the scene of fresh air and keep the airway open. For patients with breathing difficulties, they should be given oxygen. Patients of respiratory and cardiac arrest should be immediately subject to artificial respiration and sent to hospital immediately after treatment in a timely manner.
This information is edited by Xiongfeng Dai from Chemicalbook.
[Uses]

Methylamine is an important kind of fatty amines organic chemicals and is used in a variety of industries such as manufacture of dyestuffs, treatment of cellulose, acetate rayon, as fuel additive, rocket propellant, and leather tanning processes. It can be used in the synthesis of the N-methyl-chloroacetamide that is the intermediate of the organic phosphorus insecticide dimethoate and omethoate; synthesis of the intermediate of the monocrotophos, α-chloro acetoacetyl methylamine; synthesis of the intermediates of carbamate pesticide, carbamoyl chloride and methyl isocyanate; as well as the synthesis of other pesticides varieties such as formamidine, amitraz, and tribenuron, etc. In addition, it can also be used in medicine, rubber, dyes, leather industry and photosensitive materials.
[Production method]

There are a lot of ways for manufacturing of methylamine. But in industry, people mainly apply methanol amination.
CH3OH + NH3 → CH3NH2 + H2O
2CH3OH + NH3 → (CH3) 2NH + 2H2O
3CH3OH + NH3 → (CH3) 3N + 3H2O
It is obtained through the following process: methanol and ammonia is at a ratio of 1.5 to 4 and subject to continuous vapor phase catalytic amination at high temperature and high pressure with activated alumina as a catalyst to generate the mixture crude product of mono-, di-, trimethylamine. The crude mixture further goes through a series of distillation column for continuous pressure and distillation separation, have cooling for deamination, dehydration can yield respectively mono-, di-, trimethylamine products.
Spectrum DetailBack Directory
[Spectrum Detail]

Methylamine(74-89-5)IR1
Methylamine(74-89-5)Raman
Tags:74-89-5 Related Product Information
124-40-3 75-50-3 37595-74-7 36635-61-7 586-77-6 320-88-7 24589-78-4 38078-09-0 103-88-8 7188-38-7 349-55-3 2769-64-4 14542-93-9 328-74-5 39687-95-1 2579-20-6 620-40-6 2008-39-1