| Identification | More | [Name]
1,3-Dinitrobenzene | [CAS]
99-65-0 | [Synonyms]
1,3-DINITROBENZENE
M-DINITROBENZENE
1,3-dinitro-benzen
1,3-Dinitrobenzol
2,4-Dinitrobenzene
3-dinitrobenzene
Benzene, m-dinitro-
Binitrobenzene
Dwunitrobenzen
dwunitrobenzen(polish)
m-dinitro-benzen
m-dnb
meta-dinitrobenzene
nsc-7189
1,3-DINITRO BENZENE MI
m-dimitrobenzene
1,3-DINITROBENZENE, 1000MG, NEAT
1,3-DINITROBENZENE OEKANAL, 250 MG
1 3-DINITROBENZENE 98% (GC)
M-DinitrobenzeneGr | [EINECS(EC#)]
202-776-8 | [Molecular Formula]
C6H4N2O4 | [MDL Number]
MFCD00007222 | [Molecular Weight]
168.11 | [MOL File]
99-65-0.mol |
| Chemical Properties | Back Directory | [Appearance]
orange to yellow crystalline powder | [Melting point ]
86 °C | [Boiling point ]
297 °C(lit.) | [density ]
1.575 | [vapor pressure ]
8.15 x 10-4 mmHg at 35 °C (Hine et al., 1963) | [refractive index ]
1.4660 (estimate) | [Fp ]
150 °C
| [storage temp. ]
2-8°C | [solubility ]
Chloroform (Sparingly), DMSO (Slightly), Methanol (Very Slightly) | [form ]
solid | [color ]
White to yellowish crystals | [Specific Gravity]
1.368 | [Stability:]
Stable. Incompatible with reducing agents, oxidizing agents, strong bases. May explode if heated. | [Water Solubility ]
500 mg/L (20 ºC) | [Merck ]
14,3273 | [BRN ]
1105654 | [Dielectric constant]
2.8（20.0℃） | [Exposure limits]
NIOSH REL: TWA 1, IDLH 50; OSHA PEL: TWA 1; ACGIH TLV:
TWA 0.15 ppm for all isomers (adopted). | [CAS DataBase Reference]
99-65-0(CAS DataBase Reference) | [NIST Chemistry Reference]
Benzene, 1,3-dinitro-(99-65-0) | [EPA Substance Registry System]
99-65-0(EPA Substance) |
| Safety Data | Back Directory | [Hazard Codes ]
T+,N,T,F | [Risk Statements ]
R26/27/28:Very Toxic by inhalation, in contact with skin and if swallowed .
R33:Danger of cumulative effects.
R50/53:Very Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment .
R40:Limited evidence of a carcinogenic effect.
R36/37/38:Irritating to eyes, respiratory system and skin .
R23/24/25:Toxic by inhalation, in contact with skin and if swallowed .
R11:Highly Flammable. | [Safety Statements ]
S28:After contact with skin, wash immediately with plenty of ... (to be specified by the manufacturer) .
S36/37:Wear suitable protective clothing and gloves .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S60:This material and/or its container must be disposed of as hazardous waste .
S61:Avoid release to the environment. Refer to special instructions safety data sheet .
S27:Take off immediately all contaminated clothing .
S16:Keep away from sources of ignition-No smoking . | [RIDADR ]
UN 3443 6.1/PG 2
| [WGK Germany ]
3
| [RTECS ]
CZ7350000
| [TSCA ]
Yes | [HazardClass ]
6.1 | [PackingGroup ]
II | [HS Code ]
29042090 | [Safety Profile]
Suspected carcinogen.
Human poison by ingestion. Experimental
poison by ingestion, intraperitoneal, and
intravenous routes. Human systemic effects
by skin contact: cyanosis and motor activity
changes. Experimental reproductive effects.
An eye irritant. Mutation data reported.
Mixture with nitric acid is a high explosive.
Mixture with tetranitromethane is a hgh
explosive very sensitive to sparks. When
heated to decomposition it emits toxic
fumes of NOx. See also 0and pDINITROBENZENE. | [Hazardous Substances Data]
99-65-0(Hazardous Substances Data) | [Toxicity]
LD50 in male, female rats (mg/kg): 91, 81 orally (Cody) |
| Raw materials And Preparation Products | Back Directory | [Raw materials]
Sulfuric acid-->Nitric acid-->Benzene-->Sodium sulfite-->Sodium metabisulfite-->Nitrobenzene-->Benzenesulfonic acid sodium salt-->1,4-DINITROBENZENE-->1,2-Dinitrobenzene-->Benzenethiol,2,4-dinitro--->N,N-DIMETHYL-3-NITROANILINE-->2,4-Dinitrophenylhydrazine-->2,4-Dinitroiodobenzene-->2,4-DINITROBENZOIC ACID-->1-Iodo-3-nitrobenzene-->3-Nitrophenylboronic acid | [Preparation Products]
Nitrobenzene-->1,3-Dichlorobenzene-->3-Nitroaniline-->m-Anisidine-->2,3-Dichloro-1,4-naphthoquinone-->Emodin-->2,3,5-TRIMETHYL-1,4-BENZENE DIAMINE-->2-Nitrobenzenesulfenyl chloride-->2-Nitrobenzenesulfonamide-->METHYL N-(3-NITROPHENYL)CARBAMATE-->m-Phenylenediamine-->Phenol, 4-amino-, reaction products with 1,3-dinitrobenzene and sodium sulfide |
| Hazard Information | Back Directory | [General Description]
Yellow solid with a slight odor. Sinks in water. | [Reactivity Profile]
All three isomers have similar properties and may react vigorously with oxidizing materials. Their reaction with nitric acid (nitration) will lead to a mixture of trinitrobenzenes possessing high-explosive properties [Urbanski, 1967, vol. 3, p. 290]. If heat and reaction conditions of the nitration are not controlled, detonation comparable to TNT may occur [Anon., J. R. Inst. Chem., 1960, 84, p. 451]. Mixture of 1,3-dinitrobenzene with tetranitromethane was found highly explosive [Urbanski, 1964, vol. 1, 592]. 1,2-dinitrobenzene is a severe explosion hazard when shocked or exposed to heat or flame. When heated to decomposition all dinitrobenzens emit toxic fumes of nitrogen oxides [Sax, 9th ed., 1996, p. 1374]. | [Air & Water Reactions]
Slowly mixes with water. | [Health Hazard]
Inhalation or ingestion causes loss of color, nausea, headache, dizziness, drowsiness, and collapse. Eyes are irritated by liquid. Stains skin yellow; if contact is prolonged, can be absorbed into blood and cause same symptoms as for inhalation. | [Fire Hazard]
Behavior in Fire: May explode | [Description]
1,3-Dinitrobenzene (1,3-DNB) is an impurity present in the
manufacture of 2,4,6-trinitrotoluene. Workers in munitions
plants are at risk of exposure. While it does not bioaccumulate, it
persists in the environments (air, water, and soil) with slow rates
of degradation. Metabolism in animals (rabbits) results in
reduction of the nitro functionalities to amine functionalities to
produce 2,4-diaminophenol, m-nitroaniline, m-phenylenediamine,
and 2-amino-4-nitrophenol. Human exposure is generally
dermal contact or inhalation of vapor. | [Chemical Properties]
orange to yellow crystalline powder | [Uses]
Dinitrobenzene (as a mixture of 1,2-dinitro- 1,3-dinitro- and
1,4-dinitro-isomers) is used in the manufacture of dyes and
explosives, and in organic syntheses. | [Uses]
Organic synthesis; dyes. | [Definition]
ChEBI: A dinitrobenzene that is benzene disubstituted at positions 1 and 3 with nitro groups. | [Preparation]
1,3-Dinitrobenzene is accessible by nitration of nitrobenzene. The reaction proceeds under acid catalysis using sulfuric acid. The directing effect of the nitro group of nitrobenzene leads to 93% of the product resulting from nitration at the meta-position. The ortho- and para-products occur in only 6% and 1%, respectively. | [Synthesis Reference(s)]
The Journal of Organic Chemistry, 38, p. 4243, 1973 DOI: 10.1021/jo00964a007
Synthesis, p. 1085, 1992 DOI: 10.1055/s-1992-26309 | [Environmental Fate]
Biological. Under anaerobic and aerobic conditions using a sewage inoculum, 1,3-
dinitrobenzene degraded to nitroaniline (Hallas and Alexander, 1983). In activated sludge
inoculum, following a 20-d adaptation period, no degradation was observed (Pitter, 1976).
Photolytic. Low et al. (1991) reported that the nitro-containing compounds (e.g., 2,4-
dinitrophenol) undergo degradation by UV light in the presence of titanium dioxide yielding
ammonium, carbonate, and nitrate ions. By analogy, 1,3-dinitrobenzene should degrade forming
identical ions.
Chemical/Physical. Releases toxic nitrogen oxides when heated to decomposition (Sax and
Lewis, 1987). 1,3-Dinitrobenzene will not hydrolyze in water (Kollig, 1993). | [Solubility in organics]
Soluble in acetone, ether, pyrimidine (Weast, 1986), alcohol (27 g/L), pyridine (3,940 g/kg at 20–25 °C) (Dehn, 1917); freely soluble in benzene, chloroform, ethyl acetate (Windholz et al., 1983),
and toluene. | [Purification Methods]
Crystallise 1,3-dinitrobenzene from alkaline EtOH solution (20g in 750mL 95% EtOH at 40o, plus 100mL of 2M NaOH) by cooling and adding 2.5L of H2O. The precipitate, after filtering off, is washed with H2O, sucked dry, and crystallised from 120mL, then 80mL of absolute EtOH [Callow et al. Biochem J 32 1312 1938]. Alternatively crystallise it from MeOH, CCl4 or EtOAc. It can be sublimed in a vacuum. [Tanner J Org Chem 52 2142 1987, Beilstein 5 IV 739.] | [Toxicity evaluation]
Cultured astrocytes and brain capillary endothelial cells were
exposed to 1 mM concentrations for 1 day in an in vitro
blood–brain barrier (BBB) model, resulting in cell death. |
|