2-Butendioyldichlorid, (E)- Chemische Eigenschaften,Einsatz,Produktion Methoden
R-Sätze Betriebsanweisung:
R20/21/22:Gesundheitsschädlich beim Einatmen,Verschlucken und Berührung mit der Haut.
R34:Verursacht Verätzungen.
R37:Reizt die Atmungsorgane.
R29:Entwickelt bei Berührung mit Wasser giftige Gase.
R36/37:Reizt die Augen und die Atmungsorgane.
R14:Reagiert heftig mit Wasser.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
S8:Behälter trocken halten.
S27:Beschmutzte, getränkte Kleidung sofort ausziehen.
Chemische Eigenschaften
Clear yellow liquid
Verwenden
Fumaryl chloride was used in the preparation of high molecular weight poly(propylene fumarate). The photodissociation dynamics of fumaryl chloride was studied. It is used in agrochemicals and pharmaceuticals manufacturing. Also used as an intermediate for dyes, textile auxiliaries and peroxide compounds. It is an acid halide building block.
Allgemeine Beschreibung
Fumaryl chloride appears as a straw colored fuming liquid with a pungent odor. Vapors irritate the eyes and mucous membranes. Corrosive to metals and tissue.
Reaktivität anzeigen
Fumaryl chloride is incompatible with strong oxidizing agents, alcohols, amines and other bases. May react vigorously or explosively if mixed with diisopropyl ether or other ethers in the presence of trace amounts of metal salts [J. Haz. Mat., 1981, 4, 291].
Hazard
Corrosive to eyes and skin.
Health Hazard
TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Contact with molten substance may cause severe burns to skin and eyes. Reaction with water or moist air will release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
Brandgefahr
Combustible material: may burn but does not ignite readily. Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water.
Sicherheitsprofil
Moderately toxic by
ingestion, inhalation, and skin contact. A
skin, eye, and mucous membrane irritant. A
corrosive agent. Will react with water or
steam to produce toxic and corrosive fumes.
When heated to decomposition it emits
highly toxic fumes of phosgene and HCl.
2-Butendioyldichlorid, (E)- Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
(E)-1,4-Diphenyl-2-buten-1,4-dion
2,4-Dibrom-1,3,5-trimethylbenzol
(E)-2,2'-Vinylenbis[5-methylbenzoxazol]
BIS(2,2,2-TRIFLUOROETHYL)MALEATE
(Z)-4-((4-acetamidophenyl)amino)-4-oxobut-2-enoic acid
2-Butene-1,4-dione,1,4-bis(4-chlorophenyl)-
Dyclonine Impurity 3
Bis(2,4,6-tribromphenyl)fumarat
