| Chemical Properties | clear colorless to light yellow liquid |
| Uses | Hexamethyleneimine is used as a pharmaceutical product and raw material for rubber products. It is also used as a intermediate for agrochemicals, zeolites, dyes , inks, rubber chemicals, textile chemicals, corrosion inhibitors, ore flotation. |
| Uses | A degradation product of herbicide Molinate in pot soil and rice plants. |
| Production Methods | Hexamethyleneimine is produced in 84% yield by heating hexamethylenediamine at 350 ℃ in a stream of hydrogen. The catalyst, ammonium vanadate on activated alumina, is prereduced with hydrogen at 500 ℃. Residues from the industrial distillation of hexamethylenediamine can be converted into hexamethyleneimine over aluminum silicate or aluminum oxide in a stream of nitrogen. For the preparation from caprolactam]. Hexamethyleneimine can be prepared by dimerizing acrolein, reducing the product to 2- hydroxymethyltetrahydropyran, expanding the ring to give oxepane, followed by treatment with ammonia over aluminum oxide at 350 ℃.
|
| Application | The most important use is the conversion of hexamethyleneimine into S-ethylhexahy- dro-1H-azepine-1-carbothioate, the selective rice herbicide Molinate (C2H5 S–CO–NC6H12 , Zeneca).
|
| Definition | ChEBI: An azacycloalkane that is cycloheptane in which one of the carbon atoms is replaced by a nitrogen atom. |
| General Description | A colorless liquid with an ammonia-like odor. Flash point 65°F. Toxic by ingestion. Corrosive to metals and tissue. Combustion produces toxic oxides of nitrogen. |
| Air & Water Reactions | Highly flammable. Soluble in water. |
| Reactivity Profile | Hexamethyleneimine neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated in combination with strong reducing agents, such as hydrides. |
| Hazard | Toxic by ingestion, strong irritant to tissue. |
| Health Hazard | Inhalation of vapor irritates respiratory tract; high concentrations may cause disturbance of the central nervous system. Ingestion causes burns of mouth and stomach. Contact with concentrated vapor may cause severe eye injury. Contact with liquid causes burns of eyes and skin. |
| Flammability and Explosibility | Highly flammable |
| Chemical Reactivity | Reactivity with Water No reaction; Reactivity with Common Materials: No reactions; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent. |
| Purification Methods | Purify azepane by dissolving in Et2O and adding ethanolic HCl until all the base separates as the white hydrochloride, filter, wash with Et2O and dry it (m 236o). The salt is dissolved in the minimum volume of H2O and basified to pH ~ 14 with 10N KOH. The solution is extracted with Et2O, the extract is dried over KOH, evaporated and distilled. The free base is a FLAMMABLE and TOXIC liquid, and best kept as the salt. The nitrate has m 120-123o, the picrate has m 145-147o, and the tosylate has m 76.5o (ligroin). [Müller & Sauerwald Monatsh Chem 48 727 1027, Hjelt & Agback Acta Chem Scand 18 194 1964, Beilstein 20 II 1406, 20 III/IV 1406, 20/4 V 3.] |