Back to ChemicalBook Home--->CAS DataBase List--->1309-42-8


1309-42-8 Structure

1309-42-8 Structure

Magnesium hydroxide



[Molecular Formula]

[MDL Number]

[Molecular Weight]

[MOL File]

Chemical PropertiesBack Directory

odourless white powder
[Melting point ]

350 °C (lit.)
[mp ]

350 °C(lit.)
[density ]

2,36 g/cm3
[solubility ]

5 M HCl: 0.1 M, clear, yellow
[form ]

[Specific Gravity]

[color ]



[PH Range]

9.5 - 10.5
[Water Solubility ]

0.9 mg/100 mL (18 ºC)
[Sensitive ]

Air Sensitive

λ: 260 nm Amax: 0.030
λ: 280 nm Amax: 0.025
[Merck ]

[Solubility Product Constant (Ksp)]

pKsp: 11.25


Magnesium Hydroxide is an alkali that is a general purpose food additive. it exists as a white powder and has poor solubility in water and in alcohol. in frozen desserts it will increase the tendency for fat globules to clump, which results in an increase in dryness. it reacts with triglycerides in fatty acids to form soaps. it also functions as a drying agent in foods.
[CAS DataBase Reference]

1309-42-8(CAS DataBase Reference)
[NIST Chemistry Reference]

Magnesium hydroxide(1309-42-8)
[EPA Substance Registry System]

Magnesium hydroxide (Mg(OH)2) (1309-42-8)
Safety DataBack Directory
[Hazard Codes ]

[Risk Statements ]

R36/37/38:Irritating to eyes, respiratory system and skin .
[Safety Statements ]

S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36:Wear suitable protective clothing .
S37/39:Wear suitable gloves and eye/face protection .
[WGK Germany ]


[F ]


[HS Code ]

[Safety Profile]

Moderately toxic by intraperitoneal route. Human systemic effects: chlorine level changes, coma, somnolence. Incompatible with maleic anhydride, phosphorus. See also MAGNESIUM COMPOUNDS.
[Hazardous Substances Data]

1309-42-8(Hazardous Substances Data)

LD50 oral in rat: 8500mg/kg
Raw materials And Preparation ProductsBack Directory
【Raw materials】

Sodium carbonate-->Magnesium sulfate-->CARBON DIOXIDE-->Magnesium oxide-->Magnesium sulfate heptahydrate-->Magnesium carbonate-->Coke (coal)-->BITTERN
【Preparation Products】

Potassium carbonate-->Magnesium oxide-->Calcium chloride hexahydrate-->Calcium chloride dihydrate-->Calcium lactate-->Magnesium fluorosilicate-->Artinite-->Magnesium fluosilicate-->Magnesium bromide-->Magnesium hydroxide,activated-->MAGNESIUM L-GLUTAMATE TETRAHYDRATE-->Magnesium peroxide-->MAGNESIUMHUMATE-->Magnesium bromide-->magnesium oxide whisker:magnesia whisker-->basic magnesium sulfate whiskei
Material Safety Data Sheet(MSDS)Back Directory
[msds information]

Magnesium hydroxide(1309-42-8).msds
Questions And AnswerBack Directory

Magnesium hydroxide is best known as the active ingredient in Milk of Magnesia, an antacid and laxative which has been used for 150 years. It forms a suspension in water, and its reaction with acid only dissolves it gradually, giving it long-lasting effects. At higher doses, rather than acid neutralization, its primary action is to hold water, as it is not absorbed by the large intestine, relieving constipation.
It is also used as a fire retardant and smoke repressor in various applications due to an endothermic decomposition reaction which takes place at 332°C, releasing magnesia and water. Further applications include wastewater treatment, as a fuel additive, and production of magnesium salts.
[Chemical properties]

Magnesium hydroxide is a white to off-white crystalline powder with a specific gravity of 2.4 and a Mohs hardness of around 3.0. It loses 30.9% of its mass as water vapor on heating above 450°C. It being soluble in dilute acid and ammonium salt solution, but almost insoluble in water and alcohol. The solubility in water (18 ° C) was 0.0009g/100g.
Magnesium hydroxide
Magnesium hydroxide is used as highly effective non-toxic inorganic flame retardant, filler, and smoke suppressant additive for production of plastics and filled (co)polymer compounds based on elastomers, thermosets, thermoplastics, including those based on polyvinylchloride, polyamides, polystyrene, polyethylene, polypropylene, polyethylene terephthalate, ultrathene, and so on, in paper and cardboard industry, as a mild neutralizing agent for waste and natural water treatment, as raw material in chemical and pharmaceutical industry.
[main application]

Magnesium hydroxide is an excellent flame retardant for plastics and rubber products. In environmental protection, it is taken as flue gas desulfurization agent and can replace the caustic soda and lime as the neutralizer of acid-containing waste water and the absorbent of the heavy metal. In addition, it can also be used for the electronics industry, medicine, sugar refining, as insulation materials and for the manufacturing of other magnesium salt products.
Magnesium hydroxide is used as a flue gas desulfurization absorbent. In the 20th century, before the 1970s, most flue gas desulfurization applied sodium hydroxide method, limestone gypsum method. However, due to the secondary pollution of the byproducts to the environment, it has been switched to hydrogen magnesium oxide method since the 20th century; as acidic wastewater neutralizer; as the flame retardants of the synthetic resin; it was previously often used of bromine, phosphorus, chlorine and inorganic salt system. In these products, it had been mostly used of the aluminum hydroxide in these products. However, it has now been converted to magnesium hydroxide , mainly due to that in the thermoplastic resin, it can be increased of decomposition temperature to 350 ℃ or more with magnesium hydroxide; it is medically used for the control of gastric acid and laxatives; food additives, as a mineral additive, color protection agent, desiccant, alkali agent and aid of sugar production; used as a chemical reagent for measuring ammonium salt: Mg (OH) 2 + 2NH4Cl → MgCl2 + 2NH4OH.
This product has a variety of advantage including being smoke-free, non-toxic, non-corrosive, cheap and easy to get advantages. Moreover, the temperature of its decomposition for release of water is higher than aluminum hydroxide, being more suitable for the requirement of high-temperature processing. Magnesium hydroxide can be used as the flame retardants of polyethylene, polypropylene, PVC, EPDM, unsaturated polyester and other plastics and rubber. It can also be used as the flame retardant of paint.
[Side Effects]

Treatment of gastric acid with magnesium hydroxide, the following Side effects that you should report to your doctor or health care professional as soon as possible:
allergic reactions like skin rash, itching or hives, swelling of the face, lips, or tongue
feeling faint or lightheaded, falls
loss of appetite
nausea, vomiting
rectal bleeding
unusually weak or tired
Side effects that usually do not require medical attention (report to your doctor or health care professional if they continue or are bothersome):
chalky taste
stomach cramps

Magnesium hydroxide is an excellent flame retardant for plastics and rubber products. In environmental protection, it can be used as flue gas desulfurization agent, being able to replace the caustic soda and lime as acid-containing waste water neutralizer. It can also used as oil additive with anti-corrosion and desulfurization effect. In addition, it can also be used for the electronics industry, medicine, sugar refining, for insulation materials and the manufacture of other magnesium salt products.
One important application of Magnesium Hydroxide is the use of the material in the pharmaceutical industry, for example as antacid to neutralize stomach acids and as laxative.
The largest industrial application of Magnesium Hydroxide is flame retardants for articles such as roofing, isolation materials, plastic articles and coatings. The mechanism of flame retardancy is based on the endothermic decomposition of the material into MgO and H2O. This reaction adsorbs heat, which delays ignition of the associated substance. The water that is released dilutes combustible gases and inhibits oxygen from aiding the combustion.
[Production method]

Brine-lime method:
Send the preliminarily purified and refined brine and digested lime-treated lime milk for precipitation in the sedimentation tank, and the flocculant is added to the obtained slurry, mixed thoroughly, and then enters the sedimentation tank for separation, filtering, washing, drying and pulverizing to obtain the finished product of magnesium hydroxide. Its
MgCl2 + Ca (OH) 2 → CaCl2 + Mg (OH) 2
. Brine-Ammonia water method:
Apply purification process to remove the sulfate, carbon dioxide, boron and other impurities of brine for using as raw material brine. Ammonia is taken as a precipitant in the reactor for precipitation reaction. Add a certain amount of crystal seed before the reaction and stir thoroughly. The ratio of brine to ammonia is 1: (0.9~0.93), and the temperature is controlled at 40 ℃. Add the flocculant after the end of the reaction, and apply filtering, washing, drying and crushing to the precipitate to obtain the finished product of magnesium hydroxide. The reaction equation is:
MgC12 + 2NH3 • H2O → Mg (OH) 2 + 2NH4Cl
The test method needs to be improved of the yield, shortened of the washing cycle and improved of the production process.
Magnesite-hydrochloric acid-ammonia water method: magnesite and anthracite or coke is subject to calcination in the vertical kiln to generate magnesium oxide and carbon dioxide. The magnesite powder is prepared into a magnesium chloride solution by reacting with a prescribed concentration of hydrochloric acid.
Magnesium chloride solution is reacted with a certain concentration of ammonia in the reactor. The resulting product is successively subject to washing, sedimentation, filtration separation, drying, grinding, to obtain the magnesium hydroxide products. If necessary, a surface treatment agent may be added for surface treatment.
Hazard InformationBack Directory
[Physical properties]

Magnesium Hydroxide decomposes when heated to 360°C and forms the oxide, MgO. It is very slightly soluble in water at 0.00122 g/100 ml and has a solubility product of 5.61×10-12. Crystals of Mg(OH)2 have a refractive index of 1.559. Its heat of formation is –925 kJ/mol with an entropy of 63 J/mol·K.
As a suspension in water, it is often called milk of magnesia because of its milk-like appearance. The solid mineral form of magnesium hydroxide is known as “brucite”.
It can be prepared by the metathesis reaction between any soluble magnesium salts and an alkali hydroxide such as sodium or even ammonium:
Magnesium hydroxide is a common component of antacids and laxatives. It interferes with the absorption of folic acid and iron. Its low solubility makes it a weak base. Another method of commercial manufacture of magnesium hydroxide involves the chloride obtained from seawater. After the chloride is recrystallized several times to obtain a level of purity, it is calcined at about 1000°C:
MgCl2·6H2O → MgCl2+6H2O
→ Mg(OH)-xCl2-x+xHCl
→ MgO+(2-x)HCl

Magnesium Hydroxide occurs naturally as the mineral brucite. Brucite, usually found as a low temperature, hydrothermal vein mineral associated with calcite, aragonite, talc, or magnesite, appears as a decomposition product of magnesium silicates associated with serpentine, dolomite, magnesite, and chromite. Brucite also occurs as a hydrated form of periclase, and is found in serpentine, marble, chlorite schists, and in crystalline limestone.

ChEBI: A magnesium hydroxide in which the magnesium atom is bound to two hydroxide groups.
[Brand name]

Oxaine M (Wyeth-Ayerst); Phillips Magnesia Tablets (Sterling Health U.S.A.); Phillips Milk of Magnesia Liquid (Sterling Health U.S.A.).
[Pharmaceutical Applications]

The synthesis of magnesium hydroxide [Mg(OH)2] is based on a metathesis reaction in which magnesium salts are reacted with sodium or potassium hydroxide.
Magnesium hydroxide (Mg(OH)2) has only limited solubility in water and the resulting suspension is called milk of magnesia, which is commonly used as an antacid and is known to be a mild base.
Magnesium hydroxide [Mg(OH)2] is present in antacids because of its laxative properties and is also the main ingredient of the ‘milk of magnesia’. The ‘milk of magnesia’ is a suspension of Mg(OH)2 in water, which has a milk-like appearance because of the low aqueous solubility of Mg(OH)2. It is considered as a strong electrolyte and a weak base and is given to the patient for indigestion and heartburn. The alkaline suspension neutralises any excess stomach acid and therefore works as an antacid. It also stimulates intestinal movement, as the magnesium ions increases the water content in the intestines through its osmotic effect and as a result softens any faeces present.
[Veterinary Drugs and Treatments]

Magnesium hydroxide in combination with aluminum salts have been used in veterinary medicine for the adjunctive treatment of esophagitis, gastric hyperacidity, peptic ulcer and gastritis. In foals and small animals, because of difficulty in administration, the frequent dosing that is often required, and availability of the histamine- 2 blocking agents (cimetidine, ranitidine, etc.), proton-pump inhibitors (e.g., omeprazole) and sucralfate, antacids have largely been relegated to adjunctive roles in therapy for these indications. Magnesium hydroxide alone (milk of magnesia) is sometimes used as an oral laxative in small animals.
In ruminants, magnesium hydroxide is used to increase rumen pH and as a laxative in the treatment of rumen overload syndrome (aka acute rumen engorgement, rumen acidosis, grain overload, engorgement toxemia, rumen impaction).
Spectrum DetailBack Directory
[Spectrum Detail]

Magnesium hydroxide(1309-42-8) IR1
Well-known Reagent Company Product InformationBack Directory
[Acros Organics]

Magnesium hydroxide, pure, 95%(1309-42-8)
[Alfa Aesar]

Magnesium hydroxide, 95-100.5%(1309-42-8)
[Sigma Aldrich]

1309-42-8 suppliers list
Company Name: Henan Tianfu Chemical Co.,Ltd.
Tel: 0371-55170693
Fax: 0371-55170693
Company Name: Shanghai Zheyan Biotech Co., Ltd.
Tel: 18017610038
Tel: +86 18953170293
Fax: +86 0531-67809011
Company Name: Hubei Jusheng Technology Co.,Ltd.
Tel: 86-18871470254
Fax: 027-59599243
Company Name: Hebei Guanlang Biotechnology Co., Ltd.
Tel: +8619930503282
Company Name: Xiamen AmoyChem Co., Ltd
Tel: +86 592-605 1114
Company Name: Hubei xin bonus chemical co. LTD
Tel: 86-13657291602
Fax: 027-59338440
Company Name: Shandong chuangyingchemical Co., Ltd.
Tel: 18853181302
Company Name: Shanghai Longyu Biotechnology Co., Ltd.
Tel: +8615821988213
Fax: +86 15821988213
Company Name: Chongqing Chemdad Co., Ltd
Tel: +86-13650506873
Tel: 86-18523575427
Company Name: Shaanxi Dideu Medichem Co. Ltd
Tel: 13772537765
Fax: 029-88380327
Company Name: Zhuozhou Wenxi import and Export Co., Ltd
Tel: +8613111626072 (WhatsApp)
Fax: Wechat: +8613111626072 Wickr me: waynehu
Tel: +86 13806087780 , 13806087780
Company Name: Hubei Ipure Biology Co., Ltd
Tel: ; , +8618062405514;+8618062405514
Fax: 18062427325
Company Name: Hefei TNJ Chemical Industry Co.,Ltd.
Tel: 0551-65418671
Fax: 0551-65418697
Company Name: Hebei Dongdu Import and Export Co. LTD
Tel: 15831048222 , 15831048222
Company Name: Shanghai UCHEM Inc.
Tel: 15502138767 , 15502138767
Tags:1309-42-8 Related Product Information
1336-21-6 544-92-3 1310-73-2 20661-21-6 1309-33-7 35103-79-8 20427-58-1 1311-10-0 21351-79-1 20427-59-2 21645-51-2 39409-82-0 1309-42-8 1309-48-4 3344-18-1 12125-28-9 2414-98-4 142-72-3