| Identification | More | [Name]
INDAN | [CAS]
496-11-7 | [Synonyms]
2,3-DIHYDRO-1H-INDENE
HYDRINDENE
INDAN
INDANE
1,2-Hydrindene
1H-Indene, 2,3-dihydro-
2,3-dihydro-1h-inden
2,3-dihydro-inden
2,3-Dihydroindene
Benzocyclopentane
Hydrindonaphthene
Indene, 2,3-dihydro-
indene,2,3-dihydro-
INDANE OEKANAL, 250 MG
Indane,95%
1,2-dihydroindene
Indan Odor Standard
Hydrinden
Bicyclo[4.3.0]nona-1,3,5-triene
Dihydroindene | [EINECS(EC#)]
207-814-7 | [Molecular Formula]
C9H10 | [MDL Number]
MFCD00003795 | [Molecular Weight]
118.18 | [MOL File]
496-11-7.mol |
| Chemical Properties | Back Directory | [Appearance]
colourless to faintly yellow liquid | [Melting point ]
-51 °C (lit.) | [Boiling point ]
176 °C (lit.) | [density ]
0.965 g/mL at 25 °C(lit.)
| [vapor pressure ]
1.5 at 25 °C (extrapolated, Ambrose and Sprake, 1975) | [refractive index ]
n20/D 1.537(lit.)
| [Fp ]
50 °C
| [storage temp. ]
Flammables area | [solubility ]
Soluble in alcohol, ether (Weast, 1986), and many aliphatic hydrocarbons (hexane, pentane), and
aromatic hydrocarbons (benzene) | [form ]
Liquid | [pka]
>14 (Schwarzenbach et al., 1993) | [color ]
Clear colorless to yellow | [Stability:]
Stable. Flammable. Incompatible with strong oxidizing agents. | [Odor Threshold]
0.0037ppm | [Water Solubility ]
Soluble in ethanol, diethyl ether, chloroform (slightly), and ether. Insoluble in water. | [Specific Heat Capacity]
Cp(liquid):190.2J/(g·K),at 25℃ | [Thermal Conductivity]
0.135 W/(m·K) at 25 ℃ | [Merck ]
14,4931 | [BRN ]
1904376 | [Henry's Law Constant]
(x 10-3 atm?m3/mol):
2.14 at 25 °C (approximate - calculated from water solubility and vapor pressure) | [InChI]
1S/C9H10/c1-2-5-9-7-3-6-8(9)4-1/h1-2,4-5H,3,6-7H2 | [InChIKey]
PQNFLJBBNBOBRQ-UHFFFAOYSA-N | [SMILES]
C1Cc2ccccc2C1 | [Uses]
Organic synthesis. | [CAS DataBase Reference]
496-11-7(CAS DataBase Reference) | [EPA Substance Registry System]
Indan (496-11-7) |
| Safety Data | Back Directory | [Symbol(GHS) ]
 
GHS02,GHS08 | [Signal word ]
Danger | [Hazard statements ]
H226-H304 | [Precautionary statements ]
P210-P301+P310+P331 | [Hazard Codes ]
Xn,F | [Risk Statements ]
R10:Flammable.
R65:Harmful: May cause lung damage if swallowed. | [Safety Statements ]
S23:Do not breathe gas/fumes/vapor/spray (appropriate wording to be specified by the manufacturer) .
S24/25:Avoid contact with skin and eyes .
S62:If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label . | [RIDADR ]
UN 3295 3/PG 3
| [WGK Germany ]
3
| [RTECS ]
NK3750000
| [Hazard Note ]
Flammable | [TSCA ]
Yes | [HazardClass ]
3 | [PackingGroup ]
III | [HS Code ]
29029090 | [Storage Class]
3 - Flammable liquids | [Hazard Classifications]
Asp. Tox. 1
Flam. Liq. 3 |
| Hazard Information | Back Directory | [Chemical Properties]
Indane is a colourless to faintly yellow liquid. Insoluble in water, soluble in alcohol, ether and other organic solvents in any proportion. | [Application]
Indane is used as anti-vibration agent for aviation fuel and anti-vibration agent for rubber industry. Its derivatives can be used in pharmaceuticals and solvents. Indane can be cracked to produce benzene compounds. | [Definition]
ChEBI: Indane is an ortho-fused bicyclic hydrocarbon consisting of a benzene ring fused to a cyclopentane ring; a high-boiling (176°C) colourless liquid. It is a member of indanes and an ortho-fused bicyclic hydrocarbon. | [Preparation]
Taking heavy benzene with a Indan content of 35% as a raw material, rectifying it through an emulsification tower, and cutting the 182°C fraction from the top of the tower, that is, Indan with a content of more than 90%.? | [Synthesis Reference(s)]
Journal of the American Chemical Society, 111, p. 314, 1989 DOI: 10.1021/ja00183a048
The Journal of Organic Chemistry, 41, p. 1184, 1976 DOI: 10.1021/jo00869a022 | [Hazard]
Irritant to skin and eyes. | [Synthesis]
3-phenyl-1-propene is isomerized to give indane in the presence of AlCl3:
 | [Source]
Detected in distilled water-soluble fractions of 87 octane gasoline (0.40 mg/L), 94 octane
gasoline (0.23 mg/L), Gasohol (0.50 mg/L), No. 2 fuel oil (0.05 mg/L), jet fuel A (0.15 mg/L), and
diesel fuel (0.06 mg/L) (Potter, 1996). Based on laboratory analysis of 7 coal tar samples, indan
concentrations ranged from ND to 3,800 ppm (EPRI, 1970). | [Environmental Fate]
Photolytic. Gas-phase reaction rate constants for OH radicals, NO3 radicals, and ozone at 24 °C
were 1.9 x 10-11, 6.6 x 10-15, and <3 x 10-19 cm3/molecule?sec, respectively (Kwok et al., 1997). | [Purification Methods]
Shake indane with conc H2SO4, then water, dry and fractionally distil it. [Beilstein 5 H 486, 5 I 234, 5 II 376, 5 III 1200, 5 IV 1371.] |
|
| Company Name: |
J & K SCIENTIFIC LTD.
|
| Telephone: |
18210857532 18210857532 |
| Website: |
https://www.jkchemical.com |
| Company Name: |
Alfa Aesar
|
| Telephone: |
400-6106006 |
| Website: |
http://chemicals.thermofisher.cn |
| Company Name: |
Energy Chemical
|
| Telephone: |
400-0056266 |
| Website: |
www.energy-chemical.com |
|