| Identification | More | [Name]
Isomalt | [CAS]
64519-82-0 | [Synonyms]
6-o-a-d-glucopyranosyl-d-glucitol
ISOMALT
PALATINIT
PALATINITOL
PALATINOL
6-o-alpha-d-glucopyranosyl-d-glucitolmixedwith1-o-alpha-d-glucopyranosyl-d
alpha-D-glucopyranosyl-1,6-D-sorbitolpolymerwithD-Mannitol
mixedwith1-o-alpha-d-glucopyranosyl-d-glucito
IsomaltitolFcciv
Isomaltitol
ISOMALT USP
Plaltinitol
Palatinitol [6-O-α-D-glucopyranosyl-D-glucitol/6-O-α-D-glucopyranosyl-D-mannitol, 1/1] | [EINECS(EC#)]
203-252-1 | [Molecular Formula]
C24H48O22 | [MDL Number]
MFCD00190708 | [Molecular Weight]
688.62 | [MOL File]
64519-82-0.mol |
| Chemical Properties | Back Directory | [Appearance]
White or almost white powder or granules. | [Boiling point ]
788.5±60.0 °C(Predicted) | [density ]
1.69±0.1 g/cm3(Predicted) | [vapor pressure ]
0-0Pa at 20-50℃ | [storage temp. ]
Sealed in dry,Room Temperature | [solubility ]
Freely soluble in water, practically insoluble in anhydrous ethanol. | [form ]
neat | [pka]
12.89±0.70(Predicted) | [Odor]
at 100.00?%. odorless | [Water Solubility ]
Water: 250 mg/mL (726.09 mM) | [Stability:]
Hygroscopic | [InChIKey]
RWJWQKXVEITNKS-JSOWRAQNSA-N | [LogP]
-4.2--3.7 at 20℃ | [CAS DataBase Reference]
64519-82-0(CAS DataBase Reference) |
| Safety Data | Back Directory | [Hazard Codes ]
Xn | [Risk Statements ]
R20/21/22:Harmful by inhalation, in contact with skin and if swallowed .
R37/38:Irritating to respiratory system and skin .
R41:Risk of serious damage to eyes.
R48:Danger of serious damage to health by prolonged exposure. | [Safety Statements ]
S22:Do not breathe dust .
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) . | [WGK Germany ]
3 | [RTECS ]
LZ4394500 | [HS Code ]
2940006000 | [Hazardous Substances Data]
64519-82-0(Hazardous Substances Data) |
| Questions And Answer | Back Directory | [Description]
Isomalt is a sugar-free sweetener that is used as an alternative to sugar due to its physical properties. Sugar alcohols such as Isomalt are absorbed sparingly into the small intestines hence it has an insignificant effect on blood sugar concentration. Isomalt provides a wide range of other benefits such as low hygroscopicity, a natural taste, minimal calories per gram and it is tooth-friendly. This sweetener can be used by anyone and it can also be beneficial as it promotes gut health in people who are on low-carb diets and diabetic patients. In the European Union, Isomalt is indicated on food labels as E/E953.
| [Properties]
Isomalt is a combination of 2 sugar alcohols: gluco-sorbitol (GPS) and gluco-mannitol (GPM). It is a white crystalline compound without an odour. Isomalt is 55% as sugary as sucrose and it can dissolve readily into the mouth, leaving a cooling effect.
The compound has low hygroscopicity at a relative humidity (85%). Isomalt dissolves in water at 250 C/770 F, 25 g/100g of the solution; it is sparingly soluble in ethanol. The compound has a melting point of 145-1500 C/293-3020 F and it decomposes at 1600 C/3200 F or higher temperatures.
One manufacturer maintains that Isomalt does not caramelize or go through the Maillard browning interaction with amino acids.
| [Preparation]
The preparation process starts with sucrose. An enzyme inhibits the link between fructose and glucose in sucrose. In the fructose segment of the disaccharide, 2 hydrogen molecules are added to the oxygen molecule present. About half of the original fructose segment from the disaccharide is transformed into mannitol and approximately half of the fructose segment of the initial disaccharide is transformed into sorbitol. Therefore, Isomalt comprises 2 disaccharide alcohols: gluco-sorbitol and gluco-mannitol.
The molecular modifications that take this format make Isomalt enzymatically and chemically stable than sucrose. The stability of the compound makes it ideal for incorporation into a wide range of products and consumption based on its health-related advantages.
| [Uses]
Isomalt is incorporated into sugar-free products due to its tolerable aftertaste and sweet purity. The compound can be applied to a wide range of foods such as low-fat ice-cream, milk & chilled drinks, table sugar, daubing food, baking food, corn breakfast food, chewing gum, chocolate and candy.
It is also used as an anti-caking, glazing and bulking agent in low-calorie toffees, fruit spreads, smoked and frozen meat and fish, infant formulas, lozenges, pan-coated tablets, mineral/multivitamin supplements and jams.
Isomalt increases the transfer of flavour in certain foods. Its gradual dissolution after consumption makes candy made from this compound last for a longer time. Isomalt does not leave behind the unpleasant cooling effect associated with other polyols. These sensory properties make it ideal for addition into flavoured applications and baked products.
| [Absorption]
About 10% of the ingested compound is digested to mannitol, sorbitol and glucose in the small intestines whereas the rest is conveyed into the large intestine where it undergoes fermentation in the presence of beneficial bacteria to release short-chain fatty acids (SCFAs) and gases. The SCFAs are sparingly absorbed into the large intestine and some are consumed by the bacteria.
| [Side Effects]
Isomalt functions in the same way as other sparingly digestible compounds hence its fermentation in the intestines may result in flatulence, diarrhoea, abdominal pain, and bloating if the compound is ingested in bulk. However, the consistent use of Isomalt makes one tolerant of sugar alcohols, which minimizes the probability of occurrence of associated side effects.
| [Precautions]
Isomalt is not recommended for use in pregnant women, children and newborns. However, if the intake of this compound is inevitable, one should consult a doctor.
|
| Hazard Information | Back Directory | [Chemical Properties]
Isomalt is a more or less equimolar mixture of 1-O-a-D-glucopyranosy-D-mannitol-
dihydrate and 6-O-a-D-glucopyranosyl-D-sorbitol. Different production
conditions, however, allow variations in the ratio of the two products. The solubility
in water is about 24.5 % (w/w) at room temperature, but varies with the
composition and increases with increasing temperature. In addition to the dry
isomalt, a syrup is available.
Isomalt is, depending on the concentration, approximately 45–60 % as
sweet as sucrose, stable under normal processing conditions of foods, and
noncariogenic.
In the European Union, isomalt is approved as E 953 for a large number of food
applications. It is GRAS in the United States and also approved in many other
countries.
Owing to its low glycemic index, isomaltulose, an intermediate of the production,
has found increasing interest as a food ingredient in recent years. | [Chemical Properties]
Isomalt is a sugar alcohol (polyol) that occurs as a white or almost
white powder or granular or crystalline substance. It has a pleasant
sugarlike taste with a mild sweetness approximately 50–60% of
that of sucrose. | [Chemical Properties]
White or almost white powder or granules. | [History]
It is claimed that isomalt is odorless, white, crystalline, and sweet tasting without the accompanying taste or aftertaste. Sweetening power is from 0.45 to 0.6 that of sucrose. A synergistic effect is achieved when isomalt is combined with other artificial sweeteners and sugar substitutes. Principal applications are in confections, pan-coated goods, and chewing gum. The substance was approved for use in most European countries in 1985. Classification of isomalt as a GRAS substance was petitioned in the United States. (GRAS = generally regarded as safe.) | [Definition]
ChEBI: (2xi)-6-O-alpha-D-glucopyranosyl-D-arabino-hexitol is a glycosyl alditol consisting of alpha-D-glucopyranose and (2xi)-D-arabino-hexitol residues joined in sequence by a (1->1) glycosidic bond. It is functionally related to an alpha-D-glucose. | [Production Methods]
Developed in Germany, isomalt is described as an energy-reduced bulk sweetener and marketed in Europe under the tradename Palatinit? mark. The compound is produced from sucrose in a two-step process. In the first step, the easily hydrolyzable 1-2 glucoside linkage between the glucose and fructose moieties of sucrose are catalyzed by immobilized enzymes to produce isomaltulose, Palatinos mark After crystallization, the isomaltulose is hydrogenated in a neutral aqueous solution using a nickel catalyst. | [Production Methods]
Isomalt is produced from food-grade sucrose in a two-stage process.
Beet sugar is converted by enzymatic transglucosidation into the
reducing disaccharide isomaltulose. This undergoes catalytical
hydrogenation to produce isomalt. | [Biotechnological Production]
For the production of isomalt sucrose is converted to isomaltulose which is then
hydrogenated to yield a mixture of the two components of isomalt. Although
the production of isomalt itself from isomaltulose is a chemical hydrogenation,
transformation of sucrose into isomaltulose requires enzymatic transformation.
The enzyme sucrosemutase is sensitive to glutaraldehyde, therefore crosslinking
is not possible. For industrial use it is, however, not necessary to isolate the
enzyme, as immobilized cells of the organism can be used. Addition of sodium
alginate to the cultivated cells and subsequent addition of calcium acetate
immobilizes the cells. This allows for the use of the cells in a bed reactor, and also
facilitates the separation of the product from the reaction mixture.
The long-term stability of the immobilized organism is high and can exceed
5,000 h, even if high sucrose concentrations of 550 g/L are used. The yields are
about 80–85 % with 9–11 % of trehalulose and small quantities of other saccharides
as by-products.
Prior to hydrogenation, free sucrose has to be removed. This is carried out by
nonviable cells of Saccharomyces cerevisiae. Remaining by-products of the
reaction are converted to the respective sugar alcohols.
Although the hydrogenation of isomaltulose theoretically should yield an
equimolar mixture of the two constituents of isomalt, the share of each component
may vary between 43–57 % depending on the conditions of hydrogenation.
An alternative possibility is the direct cultivation of suitable microorganisms
such as P. rubrum on sucrose-containing juices obtained during the production of beet and cane sugar. It is claimed that glucose and fructose produced during the
transformation are consumed by the microorganisms which results in lower
amounts of by-products. | [Pharmaceutical Applications]
Isomalt is a noncariogenic excipient used in a variety of
pharmaceutical preparations including tablets or capsules, coatings,
sachets, and suspensions, and in effervescent tablets. It can also be
used in direct compression and wet granulation.
In buccal applications such as chewable tablets it is commonly
used because of its negligible negative heat of solution, mild
sweetness, and ‘mouth feel’. It is also used widely in lozenges,
sugar-free chewing gum, and hard-boiled candies, and as a
sweetening agent in confectionery for diabetics. | [Safety]
Isomalt is used in oral pharmaceutical formulations, confectionery,
and food products. It is generally regarded as a nontoxic,
nonallergenic, and nonirritant material.
Toxicological and metabolic studies on isomalt have been
summarized in a WHO report prepared by the FAO/WHO Expert
Committee (JECFA), resulting in an acceptable daily intake of ‘not
specified’.
The glycosidic linkage between the mannitol or sorbitol moiety
and the glucose moiety is very stable, limiting the hydrolysis and
absorption of isomalt in the small intestine. There is no significant
increase in the blood glucose level after oral intake, and glycemic
response is very low, making isomalt suitable for diabetics. The
majority of isomalt is fermented in the large intestine. In general,
isomalt is tolerated very well, although excessive consumption may
result in laxative effects.
Isomalt is not fermented by bacteria present in the mouth;
therefore no significant amount of organic acid is produced that
attacks tooth enamel. | [storage]
Isomalt has very good thermal and chemical stability. When it is
melted, no changes in the molecular structure are observed. It exhibits considerable resistance to acids and microbial influences.
Isomalt is non-hygroscopic, and at 25°C does not significantly
absorb additional water up to a relative humidity (RH) of 85%;
paracetamol (acetaminophen) tablets based on isomalt were stored
for 6 months at 85% RH at 20°C and retained their physical
aspect.
If stored under normal ambient conditions, isomalt is chemically
stable for many years. When it is stored in an unopened container at
20°C and 60% RH, a re-evaluation after 3 years is recommended. | [Regulatory Status]
GRAS listed. Accepted as a food additive in Europe. |
|
|