| | Identification | More |  | [Name] 
 3,5-Dimethylpyrrole-2,4-dicarboxylic acid 2-t-butyl ester-4-ethyl ester
 |  | [CAS] 
 86770-31-2
 |  | [Synonyms] 
 2-TERT-BUTYL 4-ETHYL 3,5-DIMETHYL-1H-PYRROLE-2,4-DICARBOXYLATE
 3,5-DIMETHYL-1H-PYRROLE-2,4-DICARBOXYLIC ACID-2-BUTYL-4-ETHYL ESTER
 3,5-DIMETHYL-1H-PYRROLE-2,4-DICARBOXYLIC ACID 2-TERT-BUTYL ESTER 4-ETHYL ESTER
 3,5-dimethylpyrrole-2,4-dicarboxylic acid 2-t-butyl ester-4-ethyl ester
 3,5-DIMETHYLPYRROLE-2,4-DICARBOXYLIC ACID 4-ETHYL ESTER-2-T-BUTYL ESTER
 3,5-DIMETHYLPYRROLE-2,4-DICARBOXYLIC ACID 4-ETHYL ESTER-2-TERT-BUTYL ESTER
 SALOR-INT L157929-1EA
 2-tert-Butyl 4-ethyl 3,5-dimethylpyrrole-2,4-dicarboxylate
 3,5-Dimethylpyprole-2,4-DicarboxylicAcid2-T-ButylEster-4-
 3,5-Dimethyl-1H-Pyrrole-2,4-Di
 2-tert-Butyl 4-ethyl 3,5-dimethyl-1H-pyrrole-2,4-dicarboxylate 98%
 1H-Pyrrole-2,4-dicarboxylicacid,3,5-dimethyl-,2-(1,1-dimethylethyl)4-ethylester(9CI)
 3,5-Dimethylpyrrole-2,4-dicarboxylic acid 4-ester-2-butyl ester
 3,5-Dimethyl-1H-pyrrole-2,4-dicarboxylic acid 2-
 3,5-DIMETHYL-1H-PYRROLE-2,4-DICARBOXYLIC ACID-2-BUTYL-4-ETHYL ESTER 98+%
 |  | [EINECS(EC#)] 
 617-915-1
 |  | [Molecular Formula] 
 C14H21NO4
 |  | [MDL Number] 
 MFCD02179394
 |  | [Molecular Weight] 
 267.32
 |  | [MOL File] 
 86770-31-2.mol
 | 
 | Safety Data | Back Directory |  | [Symbol(GHS) ] 
 
  GHS07
 |  | [Signal word ] 
 Warning
 |  | [Hazard statements ] 
 H302-H315-H319-H335
 |  | [Precautionary statements ] 
 P261-P305+P351+P338
 |  | [Hazard Codes ] 
 Xi
 |  | [Risk Statements ] 
 R36/37/38:Irritating to eyes, respiratory system and skin .
 |  | [Safety Statements ] 
 S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
 S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
 |  | [Hazard Note ] 
 Irritant
 |  | [HS Code ] 
 2933998090
 | 
 | Hazard Information | Back Directory |  | [Chemical Properties] 
 White or white crystalline
 |  | [Synthesis] 
 
 1. a solution of tert-butyl acetoacetate (31.65 g, 200 mmol) in acetic acid (40 mL) was cooled to 5 °C in an ice bath.
2. slowly inject the NaN02 solution (14.00 g dissolved in water) into the reaction mixture over a period of 20 minutes, maintaining an internal temperature of no more than 15°C. The syringe was washed with water (2 x 3mL) and the wash solution was added to the mixture.
3. The reaction mixture was stirred on a melting ice bath in an open flask overnight (16 hours).
4. In another 3-necked 1L round-bottomed flask equipped with a large egg-shaped stirring bar, an internal thermometer, and a dosing funnel, anhydrous sodium acetate (20 g) and ethyl acetoacetate (29.0 g, 1.1 eq.) were dissolved in 100 mL of acetic acid and placed in an oil bath at 60 °C.
5. Zn powder (10 g, Aldrich, <10 μm) was added with vigorous stirring, followed by dropwise addition of the nitrosation mixture (from Steps 1-3). The dropwise addition process was continued for 45 min while the remaining Zn powder (40 g, ~5 g at a time, at intervals of a few minutes) was added in portions, keeping the internal temperature of the flask below 85 °C.
6. The addition funnel was washed with acetic acid (3 x 10 mL), the washings were added to the mixture and stirring was continued for 1 h at 60 °C.
7. Dilute the reaction mixture by adding 100 mL of water and continue stirring at 60 °C for 1 hour.
8. Pour the reaction mixture into a large beaker, dilute with 0.5 L of water, add crushed ice (total mixture volume of 1.5 L) and place on an ice bath and stir for 1 hour.
9. The precipitate was collected by filtration, washed thoroughly with water and dried by suction.
10. The crude product was dissolved in a mixture of ethanol and ethyl acetate (1:1, 0.5 L), heated gently, filtered to remove the remaining Zn powder and the filtrate was evaporated to dryness.
11. Suspend the solid residue in 60mL of acetonitrile and place in a refrigerator (-20°C) overnight.
12. The precipitate was collected by filtration, washed with cold acetonitrile, dried by suction and dried under high vacuum to give a white sugar-like crystalline solid (35.55 g, 66.5%).
1H-NMR (CDCl3,400MHz): δ 8.93 (br s, 1H), 4.29 (q, J=7.1Hz, 2H), 2.53 (s, 3H), 2.50 (s, 3H), 1.57 (s, 9H), 1.36 (t, J=7.1Hz, 3H). |  | [References] 
 [1] Patent: WO2011/119777,  2011,  A2. Location in patent: Page/Page column 31
 [2] Patent: WO2009/157011,  2009,  A1. Location in patent: Page/Page column 27
 [3] Patent: CN108191835,  2018,  A. Location in patent: Paragraph 0024-0025
 [4] Journal of the American Chemical Society,
 [5] Journal of the American Chemical Society,  2009,  vol. 131,  p. 8578 - 8586
 | 
 |  |