Quecksilberdiiodid Chemische Eigenschaften,Einsatz,Produktion Methoden
R-Sätze Betriebsanweisung:
R26/27/28:Sehr giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
R33:Gefahr kumulativer Wirkungen.
R50/53:Sehr giftig für Wasserorganismen, kann in Gewässern längerfristig schädliche Wirkungen haben.
S-Sätze Betriebsanweisung:
S13:Von Nahrungsmitteln, Getränken und Futtermitteln fernhalten.
S28:Bei Berührung mit der Haut sofort abwaschen mit viel . . . (vom Hersteller anzugeben).
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
S60:Dieses Produkt und sein Behälter sind als gefährlicher Abfall zu entsorgen.
S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.
Chemische Eigenschaften
Red Solid
Verwenden
Mercury(II) iodide is is used for preparation of Nessler's reagent, used for detection of presence of ammonia. It is a semiconductor material, used in some x-ray and gamma ray detection and imaging devices operating at room temperatures. In veterinary medicine, it is used in blister ointments in exostoses, bursal enlargement, etc.
Allgemeine Beschreibung
A scarlet-red odorless tasteless powder. Sensitive to light. Insoluble in water and sinks in water. At elevated temperatures turns yellow but turns back to red upon cooling. Poison.
Air & Water Reaktionen
Insoluble in water.
Reaktivität anzeigen
MERCURY(II) IODIDE is a mild reducing agent. Reacts with sodium azide to form mercury(II) azide, which is shock, friction, and heat sensitive. Incompatible with acetylene, ammonia, chlorine dioxide, azides, chlorine trifluoride, calcium (because of amalgam formation), sodium carbide, lithium, rubidium, copper .
Hazard
Highly toxic by ingestion, inhalation, and
skin absorption; strong irritant.
Health Hazard
All forms of exposure to MERCURY(II) IODIDE are hazardous. Acute systemic mercurialism may be fatal within a few minutes; death by uremic poisoning is usually delayed 5-12 days. Acute poisoning has resulted from inhaling dust concentrations of 1.2-8.5 mg/m 3 of air; symptoms include tightness and pain in chest, coughing, and difficulty in breathing. Ingestion causes necrosis, pain, vomiting, and severe purging. Contact with eyes causes ulceration of conjunctiv a and cornea. Contact with skin causes irritation and possible dermatitis; systemic poisoning can occur by absorption through skin.
Brandgefahr
Special Hazards of Combustion Products: Fumes from fire may contain toxic mercury vapor.
Sicherheitsprofil
A poison. When heated
to decomposition it emits very toxic fumes
of Hg and I-. See also MERCURY(I1)
IODIDE.
mögliche Exposition
Mercuric iodide is used in medicine
and in analytical chemistry.
läuterung methode
Crystallise it from MeOH or EtOH and wash it repeatedly with distilled water (solubility is 0.006% at ~25o). It has also been mixed thoroughly with excess 0.001M iodine solution, filtered, washed with cold distilled water, rinsed with EtOH and Et2O, and dried in air. It changes colour reversibly to yellow at ~130o. [Friend Nature 109 341 1922.] POISONOUS.
Inkompatibilitäten
Violent reaction with active metals;
potassium, sodium, acids, chlorine trifluoride. Inorganic
mercury compounds are incompatible with acetylene,
ammonia, chlorine dioxide; azides, calcium (amalgam formation), sodium carbide, lithium, rubidium, copper.
Mercury iodide is a mild reducing agent. Keep away from
oxidizers. Reacts with sodium azide to form mercury(II)
azide, which is shock-, friction-, and heat-sensitive.
Incompatible with acetylene, ammonia, chlorine dioxide,
azides, chlorine trifluoride, calcium (because of amalgam
formation), sodium carbide, lithium, rubidium, copper
(NIOSH, 1997)
Quecksilberdiiodid Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
