PEEK

PEEK C화학적 특성, 용도, 생산

화학적 성질

Polyetheretherketone is a strong rigid material with outstanding heat resistance. It withstands long periods at 250°C with little change in mechanical properties and can be used up to 315°C. This level of heat resistance is the highest of current commercial melt-processable thermoplastics. The polymer also has excellent electrical insulation characteristics. Polyetheretherketone is resistant to all organic solvents although a few can cause environmental stress-cracking. The material is soluble in concentrated sulphuric acid. Polyetheretherketone can be injection moulded and extruded on conventional equipment and can be used to prepare glass-fibre and carbon-fibre composites. Applications include coatings for high performance wiring used in the aeronautics and nuclear fields and advanced structural composites.

용도

PEEK can be sulfonated and coated on nanofiltration(NF) membranes which can be used in the fabrication of antifouling based NF membranes. Sulfonated PEEK (up to 50-70 degree of sulfonation(DS)) can be used in the formation of proton exchange membranes(PEMs) for fuel cells based applications.

제조 방법

Polyaryletherketones may be prepared by methods which are analogous to those used for polysulphones, namely polyetherification and polyacylation. Polyetherification occurs when fluorinated aromatic ketones react with phenates, as illustrated by the following reactions:

일반 설명

Poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene)(PEEK) is a semi-crystalline polymer with good thermo-mechanical properties and high chemical resistance which can be used as engineering plastics.

공업 용도

PEEK can be injection-molded, compression- molded, or extruded into stock shapes, which are typically machined to final-part dimensions. Most pump components can be injection-molded as long as they do not require tight tolerances. The strict tolerances required for bushings and wear rings require parts to be machined from molded tube stock.
Replacing bronze and steel wear rings with carbon-filled or carbon-reinforced PEEK components, allows manufacturers to increase pump efficiency by achieving tighter clearances. PEEK resins also reduce vibrations caused by fluid flow across wear rings and excess rotor runout. The ductility of plastic pump components helps them outperform metal versions when it comes to reducing vibration, as well as resisting impact.

PEEK 준비 용품 및 원자재

원자재

준비 용품

PEEK 공급 업체

공급자	전화	이메일	국가	제품 수	이점
Henan Tianfu Chemical Co.,Ltd.	+86-0371-55170693 +86-19937530512	info@tianfuchem.com	China	21691	55
Shaanxi Dideu Medichem Co. Ltd	+86-029-81138252 +86-18789408387	1057@dideu.com	China	3487	58
Dideu Industries Group Limited	+86-29-89586680 +86-15129568250	1026@dideu.com	China	29067	58
Henan Alfa Chemical Co., Ltd	+8618339805032	alfa4@alfachem.cn	China	12755	58
ShanDong Look Chemical Co.,Ltd.	+8617653113219	sales01@sdlookchemical.com	China	2739	58
Alfa Chemistry	+1-5166625404	Info@alfa-chemistry.com	United States	21317	58
LEAP CHEM CO., LTD.	+86-852-30606658	market18@leapchem.com	China	24738	58
Auschemicals Pty Ltd	+61406202619	info@auschemicals.com	Australia	431	58
Shanghai Acmec Biochemical Technology Co., Ltd.	+undefined18621343501	product@acmec-e.com	China	33349	58
Aladdin Scientific	+1-833-552-7181	sales@aladdinsci.com	United States	57511	58

PEEK 관련 검색: