|
|
| | Poly(ethylene glycol) diacrylate Basic information |
| Product Name: | Poly(ethylene glycol) diacrylate | | Synonyms: | Poly(ethylene glycol) diacrylate average Mn 1,000, contains MEHQ as inhibitor;Poly(ethylene glycol) diacrylate average Mn 20,000, contains <=100 ppm MEHQ as inhibitor;Poly(ethylene glycol) diacrylate average Mn 6,000, contains <=1500 ppm MEHQ as inhibitor;Poly(ethylene glycol) diacrylate (Mn 2000);1,2-Ethanediyl bisacrylate;2-ethanediyl),.alpha.-(1-oxo-2-propenyl)-.omega.-[(1-oxo-2-propenyl)oxy]-Poly(oxy-1;poly(oxy-1,2-ethanediyl),alpha-(1-oxo-2-propenyl)-omega-[(1-oxo-2-propenyl)o;xy]- | | CAS: | 26570-48-9 | | MF: | C5H10O4 | | MW: | 134.1305 | | EINECS: | 251-228-4 | | Product Categories: | Polydispersed PEG;Acrylate;Biomaterials;Crosslinking Agents;Homobifunctional PEGs;Materials Science;Homobifunctional PEGsMaterials Science;Biocompatible/Biodegradable Materials;Homobifunctional PEGs;Materials Science;Poly(ethylene glycol) and Poly(ethylene oxide);Polymer Science;Polymers;PEG;Homobifunctional PEG BiomaterialsPolymer Science;New Products for Materials Research and Engineering;PEG Based Polymers;Poly(ethylene glycol) and Poly(ethylene oxide);Polymer Science;Crosslinking AgentsBiocompatible/Biodegradable Materials | | Mol File: | 26570-48-9.mol |  |
| | Poly(ethylene glycol) diacrylate Chemical Properties |
| Melting point | 12-17 °C | | density | 1.12 g/mL at 25 °C | | refractive index | n20/D 1.47 | | Fp | 347 °F | | storage temp. | -20°C | | solubility | H2O: soluble | | form | Granular Solid | | color | White to off-white | | Water Solubility | Soluble in water. | | Sensitive | Light Sensitive | | α-end | acrylate | | Ω-end | acrylate | | InChI | InChI=1S/C3H4O2.C2H6O2/c1-2-3(4)5;3-1-2-4/h2H,1H2,(H,4,5);3-4H,1-2H2 | | InChIKey | FCDZZFLRLVQGEH-UHFFFAOYSA-N | | SMILES | O([H])C([H])([H])C([H])([H])O[H].O([H])C(C([H])=C([H])[H])=O | | EPA Substance Registry System | Poly(oxy-1,2-ethanediyl), .alpha.-(1-oxo-2-propenyl)-.omega.-[(1-oxo-2-propenyl)oxy]- (26570-48-9) |
| Hazard Codes | Xi | | Risk Statements | 41-43-38 | | Safety Statements | 26-36/37/39 | | WGK Germany | 1 | | TSCA | TSCA listed | | HS Code | 2916.12.5050 | | Storage Class | 11 - Combustible Solids | | Hazard Classifications | Eye Dam. 1
Skin Irrit. 2
Skin Sens. 1 |
| | Poly(ethylene glycol) diacrylate Usage And Synthesis |
| Description | Poly(ethylene glycol) diacrylate (PEGDA) is a blank slate hydrogel that gels rapidly at room temperature in the presence of a photoinitiator and light. PEGDA hydrogels are potent tools for uncovering basic cellular biology because they are considered biologically inert (“blank slate”), and their mechanical properties can be varied over an extensive range of moduli.PEGDA is an emerging scaffold for tissue engineering and regenerative medicine since polymerization can occur rapidly at room temperature, requires low energy input, has high water content, is elastic, and can be customized to include a variety of biological molecules. | | Uses | PEGDA is used in dental compounds, offset inks, varnishes and flexible coatings. | | Definition | ChEBI: Poly(ethylene glycol diacrylate) is a poly(ethylene glycol) compound terminated with acrylate groups. | | General Description | Poly(ethylene glycol) diacrylate (PEGDA) is a polyethylene glycol (PEG) based material that is used as a prepolymer solution that can be used in the formation of a cross-linked polymeric system. | | reaction suitability | reagent type: cross-linking reagent
reaction type: Polymerization Reactions | | Synthesis | S1, polyethylene glycol (PEG) was dried in vacuum at 50C overnight, and K2CO3 was ground and dried in vacuum at 100C overnight, and cooled in vacuum; S2, 50g of PEG was dissolved in 100mL of anhydrous dichloromethane in a three-necked flask of 500mL, and K2CO3 was added in accordance with the amount of additions shown in Table 2, and stirred well to disperse; S3, according to the addition amount shown in Table 2, acryloyl chloride was dissolved in anhydrous dichloromethane (1:10v/v), and slowly added drop by drop to the three-necked flask, and the reaction was carried out for 24h at room temperature under the protection of nitrogen; S4, the mixture was filtered to remove the solids, and the supernatant was rotary evaporated at 37 to remove most of the solvent and then fully precipitated with ether and washed by ether for 3-5 times, and finally the product was completely dried in a vacuum. The product, polyethylene glycol diacrylate (PEGDA), was completely dried in vacuum. |
| | Poly(ethylene glycol) diacrylate Preparation Products And Raw materials |
|