| Identification | Back Directory | [Name]
3,5-Diisopropylbenzene hydroperoxide | [CAS]
26762-93-6 | [Synonyms]
DBHP
diisopropylphenyl-hydroperoxid
1,3-Diisopropylbenzolhydroperoxid
3,5-Diisopropylbenzene hydroperoxide
Bis(1-methylethyl)phenyl-hydroperoxide
HYDROPEROXIDE, BIS(1-METHYLETHYL)PHENYL
Diisopropylbenzene hydroperoxide(general)
1,4-phenylenedipropane-2,2-diyl dihydroperoxide
Diisopropylbenzene hydroperoxide, isomer mixture | [EINECS(EC#)]
247-988-1 | [Molecular Formula]
C12H18O2 | [MDL Number]
MFCD00221704 | [MOL File]
26762-93-6.mol | [Molecular Weight]
194.27 |
| Safety Data | Back Directory | [RIDADR ]
UN 2171 | [TSCA ]
TSCA listed | [REACH Registrations]
Active | [HazardClass ]
5.2 | [PackingGroup ]
II | [Safety Profile]
Questionable
carcinogen with experimental tumorigenic
data. A powerful oxidizer. When heated to
decomposition it emits acrid smoke and
fumes. See also PEROXIDES, ORGANIC. | [Hazardous Substances Data]
26762-93-6(Hazardous Substances Data) |
| Hazard Information | Back Directory | [General Description]
Liquid; colorless to pale yellow; sharp, unpleasant odor. May float or sink in water. | [Reactivity Profile]
The explosive instability of the lower dialkyl peroxides (e.g., dimethyl peroxide) and 1,1-bis-peroxides decreases rapidly with increasing chain length and degree of branching, the di-tert-alkyl derivatives being amongst the most stable class of peroxides. Though many 1,1-bis-peroxides have been reported, few have been purified because of the higher explosion hazards compared with the monofunctional peroxides. 3,5-Diisopropylbenzene hydroperoxide is unlikely that this derivative would be particularly unstable compared to other peroxides in it's class, [Bretherick 2nd ed., p 44 1979]. | [Health Hazard]
VAPOR: Irritating to eyes, nose and throat. If inhaled will cause coughing or difficult breathing. LIQUID: Irritating to skin and eyes. Harmful if swallowed. | [Fire Hazard]
Combustible. Will increase the intensity of a fire. May cause fire on contact with combustibles. Containers may explode in fire. Flammable alcohol and ketone gases are formed in fire. Burns with a flare effect. Containers may explode. | [Chemical Properties]
Diisopropylbenzene hydroperoxide is a clear, yellow liquid.
Major decomposition products include methane, 3-isopropylacetophenone,
3-(2-hydroxyisopropyl) isopropyl-benzene.
The standard packaging is a 25 L HDPE can for 25 kg peroxide solution or a 220 L HDPE drum for 200 kg
peroxide solution.DBHP may be used in mass, emulsion, and
solvent (co)polymerizations of styrene, butadiene, acrylonitrile,
acrylates, and methacrylates. In emulsion processes,
DBHP my be activated by water-soluble as well as oilsoluble
reducing agents or by metal compounds to achieve
reproducible polymerization at room temperature or lower.
DBHP is particularly suited for the cold emulsion polymerization
of rubber latexes. | [Uses]
3,5-Diisopropylbenzene hydroperoxide is used as a polymerization initiator for styrene-butadiene rubber (SBR), with an initiation rate 30%–50% faster than cumene hydroperoxide, but slower than tricumene hydroperoxide and tert-butyl cumene hydroperoxide. It can also be used as an initiator for other polymers. Contact with skin can cause burns. |
|
| Company Name: |
Rhawn Reagent
|
| Telephone: |
400-400-1332688 18019345275 |
| Website: |
http://www.rhawn.cn |
| Company Name: |
SIMAGCHEM CORP
|
| Telephone: |
+86-5922680277 +86-13806087780 |
| Website: |
http://www.simagchem.com/ |
|