| Identification | More | [Name]
Isophorondiamine | [CAS]
2855-13-2 | [Synonyms]
1-AMINO-3-AMINOMETHYL-3,5,5-TRIMETHYLCYCLOHEXANE
3-AMINOMETHYL-3,5,5-TRIMETHYLCYCLOHEXYLAMINE
5-AMINO-1,3,3-TRIMETHYLCYCLOHEXANEMETHYLAMINE
IPDA
Isophorondiamine
ISOPHORONEDIAMINE
5-amino-1,3,3-trimethyl-cyclohexanemethanamin
5-amino-1,3,3-trimethylcyclohexanemethanamine
5-amino-1,3,3-trimethyl-Cyclohexanemethanamine
5-amino-1,3,3-trimethyl-cyclohexanemethylamin
aminomethyl-5
aminomethyl-5trimethyl-3,5,5cyclohexylamine
aralditehy5083
chemamminaca17
ipd
isophorondiamine,mixtureofcisandtrans
luxamipd
vestaminipd
3-AMINOMETHYL-3 5 5-TRIMETHYLCYCLOHEXYL&
3-AMINOMETHYL-3,5,5-TRIMETHYL-CYCLOHEXYL AMINE (CIS | [EINECS(EC#)]
220-666-8 | [Molecular Formula]
C9H18N2O | [MDL Number]
MFCD00019397 | [Molecular Weight]
170.25 | [MOL File]
2855-13-2.mol |
| Chemical Properties | Back Directory | [Appearance]
faintly yellow liquid | [Melting point ]
10 °C(lit.)
| [Boiling point ]
247 °C(lit.)
| [density ]
0.924 g/mL at 20 °C(lit.)
| [vapor pressure ]
0.02 hPa (20 °C) | [refractive index ]
n20/D 1.490
| [Fp ]
>230 °F
| [storage temp. ]
Store below +30°C. | [solubility ]
Chloroform (Slightly), Methanol (Slightly) | [form ]
Liquid | [pka]
10.57±0.70(Predicted) | [color ]
Clear | [PH]
11.6 (10g/l, H2O, 20℃) | [Stability:]
Stable. Incompatible with strong oxidizing agents. | [explosive limit]
1.2%(V) | [Water Solubility ]
miscible | [Contact allergens]
Isophorone diamine is widely used in urethane and
epoxy coatings for light-stable, weather-resistant prop-
erties. It is used in water proofing and paving concret-
ing, and in the manufacture of diisocyanates and
polyamides as an epoxy resin hardener. It is a strong
sensitizer and can cause airborne contact dermatitis. | [InChIKey]
RNLHGQLZWXBQNY-UHFFFAOYSA-N | [LogP]
0.99 at 23℃ | [CAS DataBase Reference]
2855-13-2(CAS DataBase Reference) | [EPA Substance Registry System]
2855-13-2(EPA Substance) |
| Hazard Information | Back Directory | [Chemical Properties]
faintly yellow liquid | [Uses]
Isophorondiamine mainly used as epoxy curing agents, mainly for applications requiring low color, low odor, high flexural strength and excellent chemical resistance of epoxy formulations. Suitable for floor coatings, fillers and paving mixes. | [Uses]
One of the three epoxy networks based on diglycidyl ether of bisphenol-A epoxy prepolymer cured with aliphatic amines, namely triethylenetetramine (TETA), 1-(2-aminoethyl) piperazine (AEP) and isophoronediamine (IPD). ?Allergic contact dermatitis (ACD) ca | [General Description]
A clear to light-yellow liquid. Highly soluble though slightly denser than water. May be toxic by inhalation and skin absorption. Corrosive to skin. Used to make other chemicals. | [Reactivity Profile]
ISOPHORONE DIAMINE is an amine. Amines are chemical bases. They neutralize acids to form salts. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides (Roger Patrick, DuPont Engineer). Corrodes aluminum and steel in the presence of moisture and carbon dioxide [USCG, 1999]. | [Air & Water Reactions]
Soluble in water. Flash Point 234 F. Melting point 50 F. Reacts with carbon dioxide from the air to form deposits around vents (Roger Patrick, DuPont Engineer). | [Health Hazard]
Inhalation of high concentrations of vapor causes irritation, coughing, and nausea. Eyes: May cause inflammation/burns. Skin: May cause burns. Ingestion: Nausea. | [Fire Hazard]
Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form. | [Description]
Isophorone diamine is widely used as an epoxy-resin
hardener. It is a strong sensitizer and can cause
airborne contact dermatitis.
|
| Safety Data | Back Directory | [Hazard Codes ]
C | [Risk Statements ]
R21/22:Harmful in contact with skin and if swallowed .
R34:Causes burns.
R43:May cause sensitization by skin contact.
R52/53:Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment . | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S61:Avoid release to the environment. Refer to special instructions safety data sheet . | [RIDADR ]
UN 2289 8/PG 3
| [WGK Germany ]
1
| [RTECS ]
GV5020833
| [F ]
10-21-34 | [Autoignition Temperature]
380 °C | [HazardClass ]
8 | [PackingGroup ]
III | [HS Code ]
29213000 | [Hazardous Substances Data]
2855-13-2(Hazardous Substances Data) | [Toxicity]
LD50 orally in Rabbit: 1030 mg/kg |
|
|