ChemicalBook
Chinese english Germany Japanese Korea

Talg (Mg3H2(SiO3)4) Produkt Beschreibung

Talc Struktur
14807-96-6
CAS-Nr.
14807-96-6
Bezeichnung:
Talg (Mg3H2(SiO3)4)
Englisch Name:
Talc
Synonyma:
mg3;IT X;TALC;IT 3X;IT 5X;IT FT;15MOO;5000A;5000S;850JS
CBNumber:
CB5853119
Summenformel:
3MgO.4O2Si.H2O
Molgewicht:
379.263
MOL-Datei:
14807-96-6.mol

Talg (Mg3H2(SiO3)4) Eigenschaften

Schmelzpunkt:
800 °C
Dichte
2.7-2.8
storage temp. 
Sealed in dry,Room Temperature
Löslichkeit
Practically insoluble in water, in ethanol (96 per cent) and in dilute solutions of acids and alkali hydroxides.
Aggregatzustand
Powder/Solid
Farbe
White to pale gray
Wasserlöslichkeit
Insoluble in water, cold acids, alkalies.
Merck 
14,9037
InChIKey
FPAFDBFIGPHWGO-UHFFFAOYSA-N
IARC
(Vol. 42, Sup 7) 1987, 3 (Vol. 42, Sup 7, 93) 2010, 2B (Vol. 93) 2010
EPA chemische Informationen
Talc (14807-96-6)
Sicherheit
  • Risiko- und Sicherheitserklärung
  • Gefahreninformationscode (GHS)
Kennzeichnung gefährlicher Xn
R-Sätze: 20-37
S-Sätze: 36
WGK Germany  -
RTECS-Nr. WW2710000
TSCA  Yes
HS Code  25262020
Giftige Stoffe Daten 14807-96-6(Hazardous Substances Data)
Bildanzeige (GHS)
Alarmwort
Gefahrenhinweise
Code Gefahrenhinweise Gefahrenklasse Abteilung Alarmwort Symbol P-Code
H332 Gesundheitsschädlich bei Einatmen. Akute Toxizität inhalativ Kategorie 4 Warnung P261, P271, P304+P340, P312
Sicherheit
P261 Einatmen von Staub vermeiden.
P271 Nur im Freien oder in gut belüfteten Räumen verwenden.
P304+P340 BEI EINATMEN: Die Person an die frische Luft bringen und für ungehinderte Atmung sorgen.

Talg (Mg3H2(SiO3)4) Chemische Eigenschaften,Einsatz,Produktion Methoden

ERSCHEINUNGSBILD

WEISSES PULVER.

ARBEITSPLATZGRENZWERTE

TLV: ; (Alveolengängige Fraktion, asbestfrei und <1% Quarz); 2 mg/m?(als TWA); Krebskategorie A4 (nicht klassifizierbar als krebserzeugend für den Menschen); (ACGIH 2005).
MAK: (Alveolengängige Fraktion, asbestfaserfrei); Krebserzeugend Kategorie 3B; (DFG 2005).

AUFNAHMEWEGE

Aufnahme in den Körper durch Inhalation.

INHALATIONSGEFAHREN

Verdampfung bei 20°C vernachlässigbar; eine gesundheitsschädliche Partikelkonzentration in der Luft kann jedoch beim Dispergieren schnell erreicht werden.

WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION

Möglich sind Auswirkungen auf die Lunge mit nachfolgender Talk-Pneumokoniose.

LECKAGE

Verschüttetes Material in Behältern sammeln; falls erforderlich durch Anfeuchten Staubentwicklung verhindern. Reste mit viel Wasser wegspülen. Persönliche Schutzausrüstung: Atemschutzgerät, P2-Filter für schädliche Partikel.

R-Sätze Betriebsanweisung:

R20:Gesundheitsschädlich beim Einatmen.
R37:Reizt die Atmungsorgane.

S-Sätze Betriebsanweisung:

S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.

Beschreibung

Soapstone is composed primarily of talc, and has been used for most of recorded history as a carving medium; examples thousands of years old are still extant from Egyptian, Assyrian, and Chinese cultures. The term ‘talc’ was first used in AD 869 to describe minerals that were largely composed of what we now know as talc.

Chemische Eigenschaften

Talc is a very fine, white to grayish-white, odorless, impalpable, unctuous, crystalline powder. It adheres readily to the skin and is soft to the touch and free from grittiness.

Chemische Eigenschaften

White to almost white micro fine powder, greasy to

Occurrence

Talc is formed under hydrothermal conditions and is a typical mineral of weaker regional metamorphism (regional dynamo-thermometamorphism). It often occurs in association with chlorite, serpentine, or magnesite. The main parent rocks that undergo metamorphic mineral reactions leading to talc formation are either ( magnesite-bearing) siliceous dolomites, or olivine- and/or pyroxene- containing ultrabasics. In ultrabasic rocks, talc is often a product of hydrothermal alteration (autometasomatism). In commercially important deposits, talc occurs in association with tremolite, calcite, quartz, and dolomite, as the product of a more intense regional metamorphism of siliceous dolomites, and with forsterite and anthophyllite due to intense regional metamorphic overprint of ultrabasics. However, talc can also be observed as an authigenic new formation, e.g., in sandy sediments and salt deposits. Other minerals that occur in association with talc include chlorites, mica, actinolite, feldspars, rutile, pyrrhotite, pyrite, magnetite, and hematite. Limonite, a product of the weathering of iron- containing minerals, especially iron- containing ore minerals, can often be found interspersed with talc.

History

Talc, soapstone, and steatite have been used by humans as raw materials since prehistoric times. Molds carved from soapstone were used in the Bronze Age and early Iron Age for casting weapons and tools. In the Mediterranean cultures of the classical period, stone carvings were made from soapstone, and talc was used for treating wounds and in the production of cosmetic powder. In ancient Rome, women used large amounts of powder and rouge. The properties of talc, especially its characteristic greasy feel, were described by Pliny the Elder. The old Arabic word talq, which indicates its greasy nature, gave its name to the mineral. In 1550, Catherin de Medici made it once again fashionable to use facial makeup in the form of powdered talc colored by the addition of pigments, a fashion that found innumerable imitators and has continued without interruption until today.

Verwenden

Talc is a mineral composed of hydrated magnesium silicate with the chemical formula H2Mg3(SiO3)4 or Mg3Si4O10(OH)2. Talc is used in many industries such as paper making, plastic, paint and coatings, rubber, food, electric cable, pharmaceuticals, cosmetics

Verwenden

Dusting powder, either alone or with starch or boric acid, for medicinal and toilet Preparations; excipient and filler for pills, tablets and for dusting tablet molds; clarifying liquids by filtration. As pigment in paints, varnishes, rubber; filler for paper, rubber, soap; in fireproof and cold-water paints for wood, metal and stone; lubricating molds and machinery; glove and shoe powder; electric and heat insulator.

Verwenden

talc adds softness and sliding ability to a cosmetic formulation. It is also used as a bulking and opacifying agent, and as an absorbent in makeup preparations. Talc is an inert powder, generally made from finely ground magnesium silicate, a mineral.

Vorbereitung Methode

Talc is a naturally occurring hydropolysilicate mineral found in many parts of the world including Australia, China, Italy, India, France, and the USA.
The purity of talc varies depending on the country of origin. For example, Italian types are reported to contain calcium silicate as the contaminant; Indian types contain aluminum and iron oxides; French types contain aluminum oxide; and American types contain calcium carbonate (California), iron oxide (Montana), aluminum and iron oxides (North Carolina), or aluminum oxide (Alabama).
Naturally occurring talc is mined and pulverized before being subjected to flotation processes to remove various impurities such as asbestos (tremolite); carbon; dolomite; iron oxide; and various other magnesium and carbonate minerals. Following this process, the talc is finely powdered, treated with dilute hydrochloric acid, washed with water, and then dried. The processing variables of agglomerated talc strongly influence its physical characteristics.

Allgemeine Beschreibung

Odorless white to grayish-white very fine crystalline powder (unctuous). Readily adheres to the skin. Nonflammable, noncombustible, and nontoxic.

Air & Water Reaktionen

Insoluble in water.

Reaktivität anzeigen

Talc has low reactivity.

Health Hazard

Pure talc is toxicologically harmless. However, where there are high concentrations of dust in the air, face masks should be worn. If the talc contains detectable amounts of asbestos or asbestos minerals, an MAK value of 2.0 mg/m3 applies. Talc is a nontoxic, inert substance or raw material, but it can contaminate wounds and if inhaled it can cause lung irritations.

Brandgefahr

Literature sources indicate that Talc is nonflammable.

Pharmazeutische Anwendungen

Talc was once widely used in oral solid dosage formulations as a lubricant and diluent, although today it is less commonly used. However, it is widely used as a dissolution retardant in the development of controlled-release products. Talc is also used as a lubricant in tablet formulations; in a novel powder coating for extended-release pellets; and as an adsorbant.
In topical preparations, talc is used as a dusting powder, although it should not be used to dust surgical gloves. Talc is a natural material; it may therefore frequently contain microorganisms and should be sterilized when used as a dusting powder.
Talc is additionally used to clarify liquids and is also used in cosmetics and food products, mainly for its lubricant properties.

Sicherheitsprofil

The talc with less than 1 percent asbestos is regarded as a nuisance dust. Talc with greater percentage of asbestos may be a human carcinogen. A human skin irritant. Prolonged or repeated exposure can produce a form of pulmonary fibrosis (talc pneumoconiosis) which may be due to asbestos content. Questionable carcinogen with experimental tumorigenic data. A common air contaminant.

Sicherheit(Safety)

Talc is used mainly in tablet and capsule formulations. Talc is not absorbed systemically following oral ingestion and is therefore regarded as an essentially nontoxic material. However, intranasal or intravenous abuse of products containing talc can cause granulomas in body tissues, particularly the lungs. Contamination of wounds or body cavities with talc may also cause granulomas; therefore, it should not be used to dust surgical gloves. Inhalation of talc causes irritation and may cause severe respiratory distress in infants.
Although talc has been extensively investigated for its carcinogenic potential, and it has been suggested that there is an increased risk of ovarian cancer in women using talc, the evidence is inconclusive. However, talc contaminated with asbestos has been proved to be carcinogenic in humans, and asbestos-free grades should therefore be used in pharmaceutical products.
Also, long-term toxic effects of talc contaminated with large quantities of hexachlorophene caused serious irreversible neurotoxicity in infants accidentally exposed to the substance.

Carcinogenicity

In vitro assay of a number of respirable talc specimens of high purity demonstrated a modest but consistent cytotoxicity to macrophages; the investigators conclude that the talcs would be expected to be slightly fibrogenic in vivo.

Lager

Talc is a stable material and may be sterilized by heating at 160°C for not less than 1 hour. It may also be sterilized by exposure to ethylene oxide or gamma irradiation.
Talc should be stored in a well-closed container in a cool, dry place.

Toxicity evaluation

The mechanism by which the talc is toxic is largely physical in its function, impairing organ function by inhibiting necessary movement or transfer of material. Pulmonary responses can occur through production of microemboli and granuloma formation.

Inkompatibilitäten

Incompatible with quaternary ammonium compounds.

Regulatory Status

Accepted for use as a food additive in Europe. Included in the FDA Inactive Ingredients Database (buccal tablets; oral capsules and tablets; rectal and topical preparations). Included in nonparenteral medicines licensed in the UK. Included in the Canadian List of Acceptable Non-medicinal Ingredients.

Talg (Mg3H2(SiO3)4) Upstream-Materialien And Downstream Produkte

Upstream-Materialien

Downstream Produkte


Talg (Mg3H2(SiO3)4) Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global( 296)Lieferanten
Firmenname Telefon Fax E-Mail Land Produktkatalog Edge Rate
HANGZHOU CLAP TECHNOLOGY CO.,LTD
13588875226 86-571-88216897、88216896
86-571-88216895 sales@hzclap.com CHINA 6469 58
Henan Tianfu Chemical Co.,Ltd.
0371-55170693
0371-55170693 info@tianfuchem.com CHINA 22607 55
Hangzhou FandaChem Co.,Ltd.
008615858145714
+86-571-56059825 fandachem@gmail.com CHINA 8909 55
Hefei TNJ Chemical Industry Co.,Ltd.
+86-0551-65418679
86-0551-65418697 info@tnjchem.com China 3000 55
Shanghai Zheyan Biotech Co., Ltd.
18017610038
zheyansh@163.com CHINA 3623 58
career henan chemical co
+86-371-86658258
sales@coreychem.com CHINA 29954 58
Hubei Jusheng Technology Co.,Ltd.
86-18871470254
027-59599243 linda@hubeijusheng.com CHINA 28229 58
Hebei Guanlang Biotechnology Co., Ltd.
+8619930503282
sales3@crovellbio.com China 5930 58
Xiamen AmoyChem Co., Ltd
+86 592-605 1114
sales@amoychem.com CHINA 6369 58
Hubei xin bonus chemical co. LTD
86-13657291602
027-59338440 linda@hubeijusheng.com CHINA 23035 58

14807-96-6(Talg (Mg3H2(SiO3)4))Verwandte Suche:


  • mg3
  • TALCTALCTALCTALC
  • Magnesium silicate (natural)
  • TALCUM POWDER
  • HAICHEN TALC POWDER NO1 AND NO2
  • Talc (Mg3H2(SiO3)4)
  • Magnesium silicate monohydrate (Talc)
  • TALC POWDER, DAB, PH. EUR., B. P., PH. F RANC.
  • TALC POWDER <10 MICRON
  • TALC, PH EUR
  • TALC, 325 MESH
  • TALC -350 MESH
  • TALC EXTRA FINE POWDER EXTRA PURE PH EUR BP USP
  • TalcFinePowderExtraPure
  • powdered,pure,Ph.Eur.,USP
  • TALC (MAGNESIUM SILICATE )
  • TALC,FCC
  • TALC,POWDER,USP
  • NON-ASBESTIFORMTALC
  • COSMETICTALC
  • Talg (Mg3H2(SiO3)4)
  • Pigment white 26 (C.I. 77718)
  • Talc fibrous (f/ml)
  • Talc respirable dust
  • Talc total dust
  • Talc (Talcum)
  • Talc powder,superfine
  • Hydrous magnesium silicate, Talcum
  • Talc, particle size: -200 mesh (<75 μm)
  • IT 325
  • IT 3X
  • IT 5X
  • IT FT
  • IT X
  • CERAMITALC NO 1
  • talc(containingnoasbestos
  • talc(containingnoasbestosandlessth
  • talc(noneasbestiform)
  • talc(silicaandfibre
  • talc(silicaandfibrefree)
  • talcpowder
  • TALC
  • NYTAL 100 HR
  • NYTAL 200
  • NYTAL 300
  • NYTAL 300H
  • NYTAL 400
  • NYTAL(R) 100
  • TREMOLITIC TALC
  • talc suppliers
  • Agalite
  • Mistron Monomix G
  • Talc Mistron Monomix
  • Talc powder, 10 mum
  • Talc Vetec(TM) reagent grade
  • dioxosilane,oxomagnesium,hydrate
  • TALC GPR RECTAPUR
  • Magnesium silicate monohydrate
Copyright 2019 © ChemicalBook. All rights reserved