Chinese Japanese Germany

Calcium stearate

Overview Barium stearate Anti-caking agent Wire drawing lubricants Identification test Content analysis Toxicity Limitation of utilization Chemical property Uses Production methods Category Toxicity grading Acute toxicity Flammability hazard characteristics Storage Characteristics Extinguishing agent Occupational standards
Calcium stearate
Calcium stearate
Chemical Name:
Calcium stearate
Molecular Formula:
Formula Weight:
MOL File:

Calcium stearate Properties

Melting point:
storage temp. 
Store at +5°C to +30°C.
Soluble in hot pyridine, slightly soluble in oil, but insoluble in alcohol and ether.
7-9 (2.2 mg/l, H2O, 20°C)
Water Solubility 
insoluble H2O, ether, chloroform; slightly soluble hot mineral oils [MER06]
CAS DataBase Reference
1592-23-0(CAS DataBase Reference)
EPA Substance Registry System
Octadecanoic acid, calcium salt(1592-23-0)


Hazard Codes  Xn
Risk Statements  20/21/22-36/37/38
Safety Statements  22-24/25-36-26
WGK Germany  -
RTECS  WI3000000
Autoignition Temperature 460 °C DIN 51794
HS Code  29157030
Hazardous Substances Data 1592-23-0(Hazardous Substances Data)
Toxicity LD50 orally in Rabbit: > 10000 mg/kg

Calcium stearate price More Price(5)

Manufacturer Product number Product description CAS number Packaging Price Updated Buy
Sigma-Aldrich 1087359 Calcium stearate United States Pharmacopeia (USP) Reference Standard 1592-23-0 2g $348 2018-11-13 Buy
Alfa Aesar 039423 Calcium stearate 1592-23-0 1kg $41 2018-11-16 Buy
Alfa Aesar 039423 Calcium stearate 1592-23-0 5kg $138 2018-11-16 Buy
Strem Chemicals 93-2045 Calcium stearate, min. 85% 1592-23-0 100g $18 2018-11-13 Buy
Strem Chemicals 93-2045 Calcium stearate, min. 85% 1592-23-0 1kg $35 2018-11-13 Buy

Calcium stearate Chemical Properties,Uses,Production


Calcium stearate also known as calcium octadecanoic acid. Light white crystalline powder. Chemical formula (C17H35COO) 2Ca. The molecular weight is 607.00. Melting point 179~180 ℃, decomposed by heat. Insoluble in water, cold ethanol and diethyl ether, soluble in hot benzene, toluene, and turpentine, slightly soluble in hot ethanol and diethyl ether. It reacts with strong acid to be decomposed into stearic acid and corresponding calcium salt. Water absorption in the air. Intolerance lipolytic microorganisms. Pyrolysis to generate stearin ketones and hydrocarbons. Non-toxic. Industrial often mixed with the corresponding oleate.As stabilizers and lubricants of polyvinyl chloride; as halogen absorbent of polyethylene and polypropylene; as lubricants of polyolefin fibers and molded products; as lubricant and release agent of phenolic, amino and other thermosetting plastics; as intensifier of lubricating grease; as waterproofing agent of waterproof fabric; etc. Food grade Calcium stearate serves as an anti-caking agent. Dilute soap is made by the reaction of melt stearic acid and sodium hydroxide, reacting with calcium chloride, and Calcium stearate is obtained .
It can be used as heat stabilizer of polyvinyl chloride, it has excellent lubricity. Thermal stability performance is general, and is less than barium stearate, lead stearate, tin stearate and cadmium stearate. But it is cheap, low toxicity, good processability. Combined with Zinc soap and an epoxy compound, it shows a synergistic effect, improving the thermal stability, and it is commonly used for requirements nontoxic soft products, such as food packaging films, medical instruments, etc. It combines with the base lead salts and lead soaps used for hard products, increasing the gelation speed. Calcium stearate is used for polyethylene and polypropylene, and it can eliminate the adverse effects of residual catalyst on the resin color and stability. This product is also widely used as lubricant and release agent of thermosetting plastics, such as polyolefin, polyester reinforced plastics, phenolic resin, amino resin, etc.
The disadvantage of Calcium stearate is initial color. When heating at above 100 ℃ with longer time, Calcium stearate will make the white PVC become a reddish color. Particularly when titanium dioxide exists in formula, coloring is particularly serious. At this point, if 0.06~0.12% Na2CO3 or 0.09~0.19 NaHCO3 are added, it can overcome this shortcoming. But because these substances are too alkaline, they are not used in practice. In addition, when the amount of this product is large, there is segregation scaling phenomenon.

Barium stearate

Barium stearate, also known as " barium octadecanoic acid ", chemical formula Ba (C18H35O2) 2. The molecular weight is 704.13. White fine powder. Melting point 160 ℃, relative density of 1.15. Insoluble in water, soluble in cold ethanol, soluble in hot ethanol, benzene, toluene, and other non-polar solvents, after heated and dissolved in an organic solvent , and cooled into jelly. Encountered strong acid, Barium stearate can be decomposed into stearic acid and corresponding barium salt. Water absorption in the air.Preparation method: Stearic acid reacts with barium carbonate or barium hydroxide, or sodium stearate solution reacts with dilute barium chloride solution, Barium stearate is obtained . Barium stearate can be used as waterproof products, alkali pump packing, and can also be used as high-temperature lubricants and fillers of machine; heat resistance and light fastness of stabilizers of polyvinyl chloride plastics, high temperature resistant powder mold of rubber products. Barium stearate is toxic, toxicity coefficient T = 2, the typical symptoms of poisoning are vomiting, abdominal pain, diarrhea, increased blood pressure, pulse rate disorders, etc.

Anti-caking agent

Anti-caking agent, also known as caking inhibitor, is used to prevent the particles and powdered food from aggregation and agglomeration, maintaining its loose or free flowing substances. Its particles is tiny, loose porous and strong adsorption. It easily absorbs the water and oil which lead to the formation of agglomerates, making food to maintain a powder or granules state.
There are five species of anti-caking agent which are permitted to be used in China: potassium ferrocyanide, sodium aluminosilicate, tricalcium phosphate, silica and microcrystalline cellulose.
Anti-caking agents are varied, in addition to five kinds which are permitted in China, aluminum, silica, calcium silicate, Calcium stearate, magnesium carbonate, magnesium stearate, magnesium, magnesium phosphate, magnesium silicate, kaolin, talc and ferrocyanide are permitted to be used in Foreign. In addition, they have anti-caking effect, and some also have other effects, for example, calcium silicate and kaolin also has the function of filter aids, and Calcium stearate and magnesium stearate have emulsifying effect. And in addition that ferrocyanide has limited ADI value, security of other varieties are very good, ADI values are no provisions. Based on requirement, proper developments are still needed.

Wire drawing lubricants

During the process of the metal wire drawing, it sever as technological lubrication material. Its role is to form a lubricant film between the drawing metal and wire drawing die wall, reducing friction of interface, and preventing metal from bonding with wall because of heat, so as to reduce energy consumption and temperature when wire drawing, extend the service life of the die, ensure the surface quality of the product and make deformation uniform.
Steel wire drawing lubricants are classified into solid and liquid lubricants.
Solid lubricant is powder lubricant, used for dry wire drawing. Its constitution is a variety of single metal soap or metal soap which is added certain additives. Metal soap is a metal salt of fatty acids. Metallic soap as a lubricant is required to have a higher softening point and transition temperature (coefficient of friction is a sudden rise in temperature), good wear resistance and pressure resistance. Metal soap used as drawing lubricants commonly are sodium soaps and calcium soap. Sodium soda and sodium soaps are sodium stearate C17H35COONa which is chemical combination of caustic soda and saturated fatty acid glycerol C3H5 (C17H35COO), is water-soluble soap and easy to remove, applying to not too high speed and temperature of dry wire drawing. It can also be used to wet wire drawing of filament, or for drawing of steel wire with subsequent plated operations. Calcium soaps are Calcium stearate which are chemical combination of calcium hydroxide or calcium oxide and glyceryl stearate. Others include barium stearate, zinc stearate, aluminum stearate and other metal soaps. Calcium soap can form thick lubricating film with good elongation and lubrication, and therefore often it is the main component of the solid lubricant. Calcium soap is insoluble in water, easily washed clear, not applying to drawing of pre-coated steel wire. Additives are to improve lubricity or to obtain special properties which are small amounts of other substances added in the lubricant, including extreme pressure additives, oiliness improving agents, thickeners and preservatives, etc. Extreme pressure additives serve as the main additives. It can react with the metal friction surface to generate high melting point and low shear strength of metallic compound thin film, thereby improving the lubrication performance of the lubricant at high temperature and pressure. Such additives mainly include molybdenum disulfide, graphite and poly tetra fluoro ethylene, etc. Oily improving agent, also known as active additive, its role is to improve the capability of lubricants to absorb and form lubricating film. Such additives include various higher fatty acids, tallow amine, etc. Thickener is an added additive to increase the consistency of lubricant, whose materials include soda ash, lime, barium sulfate, calcium carbonate, etc. Preservatives, also known as corrosion inhibitor ,its role is to prevent corrosion of steel wire substrate from lubricant,whose material include sodium nitrite, sodium phosphate, etc.
The above information is edited by the Chemicalbook of Liu Yujie.

Identification test

Taking 1 g sample, mixed with 25ml and 5ml hydrochloric acid water, heating, fatty acids are released, so that oily layer floats in the surface of the liquid. Water layer is used for calcium test (IT-10), and it should be positive.
Taking 25 g sample, mixed with 200 ml hot water, added sulfuric acid test solution (TS-241) 60ml, heating and vigorous stirring to precipitate fatty acid, there is clear liquid. Fatty washed with boiling water, until the sulfates is divisible, collected in a small beaker, warmed on a steam bath to completely separate the fatty acid from the aqueous layer, and kept clear. Cooled and discarded the aqueous layer, the fatty acid melted and filtered-dried beaker, dried at 105 ℃ for 20min. The freezing point of purified fatty acid should not be less than 54 ℃. Freezing point is determined by conventional methods.

Content analysis

About 1.2 g sample is accurately weighed, added 0.1 mol/L hydrochloric acid, boiled 10min, or until the fatty layer is clear, if necessary, adding water to maintain the original volume. Cooled and filtered, the filtrate and flask was washed thoroughly with water until last washing liquor is no longer acidic to litmus. Filtrate is treated with sodium hydroxide solution (TS-224.) and it is neutral to litmus. Under sufficiently stirred with a magnetic stirrer, about 30ml 0.05mol/L disodium EDTA is added via a 50ml burette, adding 15ml sodium hydroxide solution and 300 mg hydroxy naphthol blue indicator, and continuing the titration to a blue endpoint. Per milliliter 0.05mol/L disodium EDTA is equivalent 2.804 mg CaO.


ADI unrestrictive provision (FAO/WHO,2001).
GRAS(FDA,§184.1229, 2000).

Limitation of utilization

FAO/WHO (1984): coated with glucose powder, sucrose powder and stock cube, etc. 15g/kg.
GB 2760-1996: chewing gum base, GMP limit.
In USA, it is used for beet sugar, pressed candies, garlic salt, meat tenderizer, dry molasses, salad prefabricated powder, spice powder, yeast.

Chemical property

White fine powder. Insoluble in water, slightly soluble in hot ethanol.


As non-toxic stabilizers and lubricants, mold release agents of polyvinyl chloride and water repellent of textiles.
As lubricant of coating paper and paint.
As internal lubricant and non-toxic stabilizers of polyvinyl chloride, and as mold release agents of the foundry industry.
Anti-caking agent; adhesive; emulsifier; lubricants; mold release agents; stabilizers; thickeners; flavoring agents.
As stabilizers and lubricants of polyvinyl chloride, and as non-toxic food packaging, medical devices and other soft film containers. As halogen absorbent of polyethylene and polypropylene, it can eliminate residual catalyst in resin. As lubricant of resin colors and molding products, but also as release agents of phenolic, amino thermosetting plastic and plastics and lubricant of polyester reinforced plastic, as thickening agent of grease, waterproofing agents of textile and flatting agent of paint. Food grade Calcium stearate can serve as an anti-caking agent to prevent powdered or crystalline food from aggregation and agglomeration, keeping free-flowing. But China's GB2760-86 allowing the use of anti-caking agent is currently only potassium ferrocyanide which is used for salt. According to the FAO/WHO regulations, Calcium stearate can be used for coating glucose powder, sucrose powder and stock cube, etc. , the maximum allowable amount is15 g/kg.
As a waterproofing agent, lubricant and plastic additives. It is widely used in food, medicine, cosmetics, plastics and rubber industries, mainly used for lubricants, emulsifiers, stabilizers, release agents, accelerators, cosmetic base materials. In the rigid plastics, it can increase the speed of the condensate. It can also be used for food packaging, medical devices and other non-toxic flexible film, but also has the effect of stabilizing agent and good long-term stability. As stabilizers and lubricants of polyethylene and polyvinyl chloride. As halogen absorbent of polyethylene and polypropylene, it can eliminate the adverse effects of residual resin on catalyst resin color and stability. It widely used to improve the heat resistance of plastic in foreign countries, improving weather resistance initial color and breathability. It will replace the toxic stabilizers with same performance.

Production methods

Firstly melted stearic acid reacts with sodium hydroxide solution to form a dilute soap, then reacted with calcium chloride, Calcium stearate crude is obtained, followed by washed, swirling water, drying, finished product is obtained. Kg/ton stearate, 920 sodium hydroxide (100% discount) 140 Calcium chloride (100% discount) 400.
After food grade sodium stearate interacts with calcium chloride solution, follow by filtered and refined.


Toxic substance

Toxicity grading

Low toxicity

Chemical Properties

white, granular, fatty powder(s); used as a water repellent; flattening agent in paints [HAW93] [MER06]

Chemical Properties

Calcium stearate occurs as a fine, white to yellowish-white, bulky powder having a slight, characteristic odor. It is unctuous and free from grittiness.

Acute toxicity

Oral-rat LD50:> 10000 mg/kg; Oral-mouse LD50:> 10000 mg/kg.


Calcium Stearate is the calcium salt of stearic acid which functions as an anticaking agent, binder, and emulsifier. it is used in garlic salt, dry molasses, vanilla and vanilla-vanillin powder, salad dressing mix, and meat tenderizer. it can be used for mold release in the tableting of pressed candies.


For waterproofing fabrics, cement, stucco, explosives; as a releasing agent for plastic molding powders; as a stabilizer for polyvinyl chloride resins; lubricant; in pencils and wax crayons. Food grade calcium stearate, derived from edible tallow, is used as a conditioning agent in certain food and pharmaceutical products.

Production Methods

Calcium stearate is prepared by the reaction of calcium chloride with a mixture of the sodium salts of stearic and palmitic acids. The calcium stearate formed is collected and washed with water to remove any sodium chloride.


Variable proportions of calcium stearate and calcium palmitate.

Flammability hazard characteristics

A public dust hazard; acrid smoke is generated by thermal decomposition.

Storage Characteristics

Storehouse keeps low temperature, dry and ventilated.

Extinguishing agent


Occupational standards

TWA 10 mg/m3


A nuisance dust.

Pharmaceutical Applications

Calcium stearate is primarily used in pharmaceutical formulations as a lubricant in tablet and capsule manufacture at concentrations up to 1.0% w/w. Although it has good antiadherent and lubricant properties, calcium stearate has poor glidant properties.
Calcium stearate is also employed as an emulsifier, stabilizing agent, and suspending agent, and is also used in cosmetics and food products.

Safety Profile

A nuisance dust. When heated to decomposition it emits acrid smoke and irritating fumes.


Calcium stearate is used in oral pharmaceutical formulations and is generally regarded as a relatively nontoxic and nonirritant material.


Calcium stearate is stable and should be stored in a well-closed container in a cool, dry place.

Regulatory Status

GRAS listed. Included in the FDA Inactive Ingredients Database (oral capsules and tablets). Included in nonparenteral medicines licensed in the UK. Included in the Canadian List of Acceptable Non-medicinal Ingredients.

Calcium stearate Preparation Products And Raw materials

Raw materials

Preparation Products

Calcium stearate Suppliers

Global( 274)Suppliers
Supplier Tel Fax Email Country ProdList Advantage
Henan DaKen Chemical CO.,LTD.
+86-371-55531817 CHINA 22049 58
Henan Tianfu Chemical Co.,Ltd.
0371-55170693 CHINA 20786 55
Mainchem Co., Ltd.
+86-0592-6210733 CHINA 32651 55
Hefei TNJ Chemical Industry Co.,Ltd.
86-0551-65418684 18949823763
86-0551-65418684 China 1659 55
Haihang Industry Co.,Ltd
+86 531 8582 1093 CHINA 4535 58
Chemwill Asia Co.,Ltd.
86-21-51861608;;; CHINA 10967 58
career henan chemical co
+86-371-86658258 CHINA 19990 58
Shanghai Zheyan Biotech Co., Ltd.
18017610038 CHINA 3624 58
J & K SCIENTIFIC LTD. 400-666-7788 +86-10-82848833
+86-10-82849933; China 96815 76
Meryer (Shanghai) Chemical Technology Co., Ltd. +86-(0)21-61259100(Shanghai) +86-(0)755-86170099(ShenZhen) +86-(0)10-62670440(Beijing)
+86-(0)21-61259102(Shanghai) +86-(0)755-86170066(ShenZhen) +86-(0)10-88580358(Beijing) China 40395 62

View Lastest Price from Calcium stearate manufacturers

Image Release date Product Price Min. Order Purity Supply Ability Manufacturer
2018-12-14 Calcium stearate
US $1.00 / kg 1kg As customer's need CARA25 career henan chemical co
2018-05-24 Calcium stearate
US $200.00 / KG 25KG 99.99% 50tons/month China Chemical Lab

Calcium stearate Spectrum

1592-23-0(Calcium stearate)Related Search:

  • aquacal
  • calciumdistearate
  • calstar
  • dibasiccalciumstearate
  • flexichem
  • flexichemcs
  • g339s
  • nopcotec104
  • stavinor30
  • stearatedecalcium
  • witcog339/s
  • witcog339s
  • calcium distearate, pure
  • Calcium Stearate (Light)
  • Calciumstearatemin
  • Calciumstearatetech
  • CalciuM Stearate, 95.0%(T)
  • Calcium stearate 6.6-7.4% Ca basis
  • Calcium stearate Vetec(TM) reagent grade
  • ACRYL/BIS (37,5:1)
  • Calcium stearate, 6.4 to 7.4% (Ca)
  • calaiumstrarate
  • Calcium Stearate NF
  • CalciumSulphate(Dihydrate)Gr(PrecipitatedPowd)
  • CalciumStearatePure
  • Calcium stearinate
  • Calciumstearate,min.85%
  • -
  • Organic Building Blocks
  • Carboxylic Acid Salts
  • Carbonyl Compounds
  • Building Blocks
  • 1592-23-0
  • Ca (Calcium) Compounds
  • Classes of Metal Compounds
  • Typical Metal Compounds
  • emulsifier
  • raw material in synthesis
  • Food additives
  • Ca (Calcium) Compounds
  • Classes of Metal Compounds
  • Typical Metal Compounds
  • metal carboxylate
  • CaC17H35COO2
  • CH3CH216COO2Ca
  • C18H36O212Ca
  • CH3CH216C00Ca
  • CaC36H70O4
  • CaCH3CH216CO22
  • C36H70O4Ca
Copyright 2017 © ChemicalBook. All rights reserved