|
|
| | Benzyltrimethylammonium chloride Basic information |
| | Benzyltrimethylammonium chloride Chemical Properties |
| Melting point | 239 °C (dec.) (lit.) | | Boiling point | 305.52°C (rough estimate) | | density | 1.08 g/mL at 25 °C | | vapor pressure | <0.0001 hPa (20 °C) | | refractive index | n20/D 1.479 | | Fp | <50° (for 61%sol), d: 1.07 at 20°/20° (61% sol) | | storage temp. | Store below +30°C. | | solubility | 800g/l | | form | Crystalline Powder or Chunks | | color | White to ivory | | PH | 6-8 (100g/l, H2O, 20℃) | | Odor | Faint, almond like odor | | PH Range | 6 - 8 | | Water Solubility | 800 g/L | | Sensitive | Hygroscopic | | BRN | 3917255 | | Stability: | Stable. Hygroscopic. Incompatible with strong oxidizing agents. | | InChI | 1S/C10H16N.ClH/c1-11(2,3)9-10-7-5-4-6-8-10;/h4-8H,9H2,1-3H3;1H/q+1;/p-1 | | InChIKey | KXHPPCXNWTUNSB-UHFFFAOYSA-M | | SMILES | [Cl-].C[N+](C)(C)Cc1ccccc1 | | CAS DataBase Reference | 56-93-9(CAS DataBase Reference) | | EPA Substance Registry System | Benzyltrimethylammonium chloride (56-93-9) |
| Hazard Codes | Xn | | Risk Statements | 22-36/38-36 | | Safety Statements | 26-37/39 | | RIDADR | UN 2811 6.1/PG 3 | | WGK Germany | 3 | | RTECS | BO8400000 | | F | 3 | | TSCA | TSCA listed | | HazardClass | 6.1 | | PackingGroup | III | | HS Code | 29239000 | | Storage Class | 6.1D - Non-combustible acute toxic Cat.3
toxic hazardous materials or hazardous materials causing chronic effects | | Hazard Classifications | Acute Tox. 3 Dermal
Acute Tox. 3 Oral
Acute Tox. 4 Inhalation
Aquatic Chronic 3
Muta. 2 | | Hazardous Substances Data | 56-93-9(Hazardous Substances Data) | | Toxicity | LD50 orally in Rabbit: 500 mg/kg |
| | Benzyltrimethylammonium chloride Usage And Synthesis |
| Chemical Properties | white to light yellow crystal powde | | Uses | Solvent for cellulose, gelling inhibitor in polyester resins, intermediate. | | Uses | Benzyltrimethylammonium chloride are Ccommercially important catalyst. Used in antistatic agent, detergent Sanitisers, softner for textiles and paper products, phase transfer catalyst. | | General Description | Light yellow liquid with a mild almond odor. May float or sink in water. | | Air & Water Reactions | Water soluble. | | Reactivity Profile | Benzyltrimethylammonium chloride can react with oxidizing materials . Toxic oxides of nitrogen and hydrochloric acid fumes may form in fire [USCG, 1999]. | | Health Hazard | Ingestion causes gastrointestinal disturbances. Contact with liquid irritates eyes and may irritate skin. | | Fire Hazard | Special Hazards of Combustion Products: Toxic oxides of nitrogen and hydrochloric acid fumes may form in fire. | | Safety Profile | Poison by ingestion. Combustible.When heated to decomposition it emits very toxic fumesof NH3, NOx, and Cl. | | Purification Methods | A 60% aqueous solution of the salt is evaporated to dryness under a vacuum on a steam bath, and then left in a vacuum desiccator containing a suitable drying agent. The solid residue is dissolved in a small volume of boiling absolute EtOH and precipitated by adding an equal volume of diethyl ether with cooling. After washing, the precipitate is dried under a vacuum [Karusch J Am Chem Soc 73 1246 1951]. [Beilstein 12 IV 2162.] |
| | Benzyltrimethylammonium chloride Preparation Products And Raw materials |
|