ChemicalBook
Chinese English Japanese Germany Korea

육불화황

육불화황
육불화황 구조식 이미지
카스 번호:
2551-62-4
한글명:
육불화황
동의어(한글):
육불화황;육불화황;황화 헥사플루오라이드
상품명:
Sulfur hexafluoride
동의어(영문):
SF6;Elegas;Esaflon;OC-6-11;SULFURHEXAFLORIDE;Hexafluorosulphane;Schwefelhcsafluorid;sulfurfluoride(sf6);SULFUR HEXAFLUORIDE;SULFUR HEXAFLOURIDE
CBNumber:
CB7724783
분자식:
F6S
포뮬러 무게:
146.05
MOL 파일:
2551-62-4.mol

육불화황 속성

녹는점
−50 °C(lit.)
끓는 점
−64 °C1 mm Hg(lit.)
밀도
6.602
증기 밀도
5.11 (vs air)
증기압
22 mm Hg ( 21.1 °C)
물리적 상태
colorless gas
수용성
slightly
Merck
13,9063
안정성
Stable. Non-flammable. Explodes on contact with disilane. Reacts with sodium.
CAS 데이터베이스
2551-62-4(CAS DataBase Reference)
NIST
Sulfur hexafluoride(2551-62-4)
EPA
Sulfur hexafluoride (2551-62-4)
안전
  • 위험 및 안전 성명
  • 위험 및 사전주의 사항 (GHS)
위험품 표기 Xi
위험 카페고리 넘버 37
안전지침서 38
유엔번호(UN No.) UN 1080 2.2
WGK 독일 -
RTECS 번호 WS4900000
위험 참고 사항 Irritant
DOT ClassificationII 2.2 (Nonflammable gas)
위험 등급 2.2
유해 물질 데이터 2551-62-4(Hazardous Substances Data)
기존화학 물질 KE-32568
그림문자(GHS):
신호 어: Warning
유해·위험 문구:
암호 유해·위험 문구 위험 등급 범주 신호 어 그림 문자 P- 코드
H280 고압가스; 가열시 폭발할 수 있음 고압가스 압축가스
액화가스
용존 가스
경고 P410+P403
예방조치문구:
P410 직사광선을 피하시오.
NFPA 704
0
1 0

육불화황 MSDS


Sulfur hexafluoride

육불화황 C화학적 특성, 용도, 생산

개요

Sulfur hexafluoride is a colorless, odorless, nontoxic, nonflammable gas that has a high dielectric strength and serves widely as an insulating gas in electrical equipment. At atmospheric pressures it sublimes directly from the solid to the gas phase and does not have a stable liquid phase unless under a pressure of more than 32 psia (221 kPa, abs). It is shipped as a liquefied compressed gas at its vapor pressure of 298 psig at 70°F (2050 kPa at 21.1°C).
One of the most chemically inert gases known, it is completely stable in the presence of most materials to temperatures of about 400°F (204°C) and has shown no breakdown or reaction in quartz at 900°F (482°C). Sulfur hexafluoride is slightly soluble in water and oil. No change in pH occurs when distilled water is saturated with sulfur hexafluoride.

화학적 성질

Chemical properties of sulfur hexafluoride are very stable. And compared to selenium hexafluoride, the hydrolysis rate of sulfur hexafluoride is extremely low, this is due to the small radius sulfur atom, which resulting in six fluorine atoms form a larger steric hindrance around. However, the fluorine atom radius is not big, so the repulsive force between the six fluorine atoms is not too large, S-F bond is not easy to dissociate. Enthalpy of formation of sulfur hexafluoride is-1220 kJ/mol, but enthalpy of formation of sulfur hexafluoride is-74 kJ/mol. Thus, the radius of fluorine atom and sulfur atom radius cause the very stable of sulfur hexafluoride molecule together---the molecules themselves are difficult to disconnect bond and break down and the attack group is difficult to approach to the central atom, in the thermodynamics and kinetics, they are both stable. Studies have said sulfur hexafluoride can be stably present in the atmosphere for thousands of years.

물리적 성질

Colorless, odorless gas; density 6.41 g/L; about five times heavier than air; liquefies at -50.7°C (triple point); density of liquid 1.88 g/mL at -50.7°C; sublimes at -63.8°C; critical temperature 45.54°C; critical pressure 37.13 atm; critical volume 199 cm3/mol; slightly soluble in water; soluble in ethanol.

용도

Sulfur hexafluoride is used extensively as a gaseous dielectric in various kinds of electrical power equipment, such as switchgear, transformers, condensers, and circuit breakers. It has also been used as a dielectric at microwave frequencies and as an insulating medium for the power supplies of high-voltage machines.
Sulfur hexafluoride is also gaining use in nonelectrical applications, including blanketing of molten magnesium, leak detection, and plasma etching in the semiconductor industry. Sulfur hexafluoride also has some limited medical applications.

용도

Dielectric for high-voltage equipment

용도

Sulfur hexafluoride is used extensively as a gaseous dielectric in various kinds of electrical power equipment, such as switchgear, transformers, condensers, and circuit breakers. It has also been used as a dielectric at microwave frequencies and as an insulating medium for the power supplies of high-voltage machines.
Sulfur hexafluoride is also gaining use in nonelectrical applications, including blanketing of molten magnesium, leak detection, and plasma etching in the semiconductor industry. Sulfur hexafluoride also has some limited medical applications.

제조 방법

Sulfur hexachloride may be prepared by reacting fluorine with sulfur or sulfur dioxide.

상표명

SonoVue (for the microbubble formulation) (Ausimont).

반응 프로필

This substance undergoes chemical reactions only under relatively severe circumstances. They are resistant to ignition, although they may become flammable at very high temperatures. They may be resistant to oxidation reduction, except in the most severe conditions. These materials may be nontoxic. They can asphyxiate. Contact of very cold liquefied gas with water may result in vigorous or violent boiling of the product and extremely rapid vaporization due to the large temperature differences involved. If the water is hot, there is the possibility that a liquid "superheat" explosion may occur. Pressures may build to dangerous levels if liquid gas contacts water in a closed container [Handling Chemicals Safely 1980].

위험도

Asphyxiant.

건강위험

Vapors may cause dizziness or asphyxiation without warning. Vapors from liquefied gas are initially heavier than air and spread along ground. Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite. Fire may produce irritating, corrosive and/or toxic gases.

화재위험

Some may burn but none ignite readily. Containers may explode when heated. Ruptured cylinders may rocket.

Materials Uses

Sulfur hexafluoride is noncorrosive to all metals. It may be partially decomposed if subjected to an electrical discharge. Some of the breakdown products are corrosive; this corrosion is enhanced by the presence of moisture or at high temperature. Sulfur hexafluoride decomposes very slightly in the presence of certain metals at temperatures in excess of 400°F (204°C); this effect is most pronounced with silicon and carbon steels. Such breakdown, presumably catalyzed by the metals, is only several tenths of 1 percent over 1 year. Decomposition at elevated temperatures does not occur with aluminum, copper, brass, and silver.
Most common gasket materials, including Teflon, neoprene, and natural rubber are suitable for sulfur hexafluoride service.

Safety Profile

This material is chemically inert in the pure state and is considered to be physiologcally inert as well. However, as it is ordinarily obtainable, it can contain variable quantities of the lowsulfur fluorides. Some of these are toxic, very reactive chemically, and corrosive in nature. These materials can hydrolyze on contact with water to yield hydrogen fluoride, which is highly toxic and very corrosive. In high concentrations and when pure it may act as a simple asphyxiant. Incompatible with disilane. Vigorous reaction with disilane. May explode. When heated to decomposition emits highly toxic fumes of Fand SOx.

잠재적 노출

May contain highly toxic sulfur pentafluoride as an impurity. SF6 is used in various electric power applications as a gaseous dielectric or insulator. The most extensive use is in high-voltage transformers. SF6 is also used in waveguides, linear particle accelerators; Van de Graaff generators; chemically pumped continuous-wave lasers; transmission lines; and power distribution substations. Nonelectrical applications include use as a protective atmosphere for casting of magnesium alloys and use as a leak detector or in tracing moving air masses. Several sources note that vitreous substitution of SF6 in owl monkeys results in a greater ocular vascular permeability than that caused by saline. This implies that SF6 could have an important use in retinal surgery.

Physiological effects

Sulfur hexafluoride is completely nontoxic, and in fact has been used medically with humans in cases involving pneumoperitoneum, the introduction of gas into the abdominal cavity. It can act as a simple asphyxiant by displacing the amount of oxygen in the air necessary to support life.
Lower fluorides of sulfur, some of which are toxic, may be produced if sulfur hexafluoride is subjected to electrical discharge. Personnel must guard against the inhalation of the gas after electrical discharge.
ACGIH recommends a Threshold Limit Value-Time-Weighted Average (TLV-TWA) of 1000 ppm (5970 mg/m3) for sulfur hexafluoride. The TLV- TWA is the time-weighted average concentration for a normal 8-hour workday and a 40-hour workweek, to which nearly all workers may be repeatedly exposed, day after day, without adverse effect.
OSHA lists an 8-hour Time-Weighted Average-Permissible Exposure Limit (TWA-PEL) of 1000 ppm (6000 mg/m3) for sulfur hexafluoride. TWA-PEL is the exposure limit that shall not be exceeded by the 8-hour TWAin any 8-hour work shift of a 40-hour workweek.

저장

All ofthe precautions necessary for the handling of any nonflammable gas must be taken.

운송 방법

UN1080 Sulfur hexafluoride, Hazard Class: 2.2; Labels: 2.2-Nonflammable compressed gas. Cylinders must be transported in a secure upright position, in a wellventilated truck. Protect cylinder and labels from physical damage. The owner of the compressed gas cylinder is the only entity allowed by federal law (49CFR) to transport and refill them. It is a violation of transportation regulations to refill compressed gas cylinders without the express written permission of the owner.

비 호환성

May contain impurities that cause it to hydrolyze on contact with water, forming corrosive and toxic hydrogen fluoride. Vigorous reaction with disilane.

폐기물 처리

Return refillable compressed gas cylinders to supplier. Seal unused cylinders and return to suppliers.

화학적 성질

Sulfur pentafluoride and sulfur tetrafluoride are classified by OSHA as highly hazardous chemicals under its Process Safety Management Standard and as toxic industrial chemicals on the basis of their highly toxic nature and production in large quantities (29 CFR 1910).

GRADES AVAILABLE

Sulfur hexafluoride is available for commercial and industrial use in various grades (minimum 99.8 mole percent) having much the same component proportions from one producer to another.

육불화황 준비 용품 및 원자재

원자재

준비 용품


육불화황 공급 업체

글로벌( 103)공급 업체
공급자 전화 팩스 이메일 국가 제품 수 이점
Henan Tianfu Chemical Co.,Ltd.
0371-55170693
0371-55170693 info@tianfuchem.com China 22607 55
Hangzhou FandaChem Co.,Ltd.
008615858145714
+86-571-56059825 fandachem@gmail.com China 9165 55
career henan chemical co
+86-0371-55982848
sales@coreychem.com China 29953 58
Hubei Jusheng Technology Co.,Ltd.
86-18871470254
027-59599243 linda@hubeijusheng.com CHINA 28229 58
Hubei xin bonus chemical co. LTD
86-13657291602
027-59338440 linda@hubeijusheng.com CHINA 23035 58
Shandong chuangyingchemical Co., Ltd.
18853181302
sale@chuangyingchem.com CHINA 5917 58
Chongqing Chemdad Co., Ltd
+86-13650506873
sales@chemdad.com CHINA 37282 58
BEYOND INDUSTRIES (CHINA) LIMITED
+8613917686115
+862162570268 sales@beyondindustriesgroup.com CHINA 704 58
SIMAGCHEM CORP
13806087780 +86 13806087780
shaobowang@simagchem.com CHINA 17384 58
Hefei TNJ Chemical Industry Co.,Ltd.
0551-65418671
0551-65418697 sales@tnjchem.com CHINA 37441 58

육불화황 관련 검색:

Copyright 2019 © ChemicalBook. All rights reserved