| Identification | More | [Name]
Cobalt chloride | [CAS]
7646-79-9 | [Synonyms]
COBALT(+2)CHLORIDE
Cobalt(Ⅱ)chloride
COBALT AA STANDARD CONCENTRATE
COBALT CHLORIDE
COBALT DICHLORIDE
COBALT(II) CHLORIDE
COBALTOUS CHLORIDE
COBALTOUS CHLORIDE CS
COBALTOUS CHLORIDE TS
LUTEOCOBALTIC CHLORIDE
Cobalt chloride (CoCl2)
Cobalt chloride (ous)
Cobalt muriate
cobaltchloride(cocl2)
cobaltmuriate
Cobaltous chloride anhydrous
Cobaltous dichloride
cobaltousdichloride
Cobatope-60
CobatousChloride | [EINECS(EC#)]
231-589-4 | [Molecular Formula]
Cl2Co | [MDL Number]
MFCD00010938 | [Molecular Weight]
129.84 | [MOL File]
7646-79-9.mol |
| Chemical Properties | Back Directory | [Appearance]
(1) Blue, (2) ruby-red crystals.Soluble in water, alcohol, and acetone. | [Melting point ]
724 °C(lit.)
| [Boiling point ]
1049 °C
| [density ]
3.35
| [vapor pressure ]
40 mm Hg ( 0 °C)
| [Fp ]
500°C | [storage temp. ]
2-8°C
| [solubility ]
585.9g/l soluble | [form ]
beads
| [color ]
Pale blue | [Specific Gravity]
3.356 | [PH]
pH (50g/l, 25℃) : >=3.0 | [Water Solubility ]
soluble | [Sensitive ]
Hygroscopic | [Merck ]
14,2437 | [Sublimation ]
500 ºC | [Exposure limits]
ACGIH: TWA 0.02 mg/m3 | [Stability:]
hygroscopic | [Uses]
Absorbent for ammonia, gas masks, electroplating, sympathetic inks, hygrometers, manufacture of vitamin B
12, flux for magnesium refining,
solid lubricant, dye mordant, catalyst, barometers,
laboratory reagent, fertilizer additive. | [CAS DataBase Reference]
7646-79-9(CAS DataBase Reference) | [NIST Chemistry Reference]
Cobalt dichloride(7646-79-9) | [EPA Substance Registry System]
7646-79-9(EPA Substance) |
| Safety Data | Back Directory | [Hazard Codes ]
T,N | [Risk Statements ]
R49:May cause cancer by inhalation.
R42/43:May cause sensitization by inhalation and skin contact .
R52/53:Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment .
R50/53:Very Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment .
R22:Harmful if swallowed. | [Safety Statements ]
S53:Avoid exposure-obtain special instruction before use .
S23:Do not breathe gas/fumes/vapor/spray (appropriate wording to be specified by the manufacturer) .
S36/37:Wear suitable protective clothing and gloves .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S60:This material and/or its container must be disposed of as hazardous waste .
S61:Avoid release to the environment. Refer to special instructions safety data sheet .
S22:Do not breathe dust . | [RIDADR ]
UN 2923 8/PG 3
| [WGK Germany ]
2
| [RTECS ]
GF9800000
| [F ]
9-21 | [TSCA ]
Yes | [HazardClass ]
8 | [PackingGroup ]
III | [HS Code ]
28273930 | [Safety Profile]
Suspected carcinogen
with experimental carcinogenic data. Poison
experimentally by ingestion, skin contact,
intraperitoneal, intravenous, and
subcutaneous routes. Moderately toxic to
humans by ingestion. Human systemic
effects by ingestion: anorexia, goiter
(increased thyroid size), and weight loss.
Experimental teratogenic and reproductive
effects. Human mutation data reported.
Incompatible with metals (e.g., sodmm and
potassium). See also COBALT. When
heated to decomposition it emits toxic
fumes of Cl-. | [Hazardous Substances Data]
7646-79-9(Hazardous Substances Data) | [Toxicity]
LD50 in mice, rats (mg/kg): 360.0, 171.0 orally; 92.6, 36.9 i.p.; 23.3, 4.3 i.v. (Singh, Junnarkar) |
| Hazard Information | Back Directory | [General Description]
Pink to red solid with a slight sharp odor. Sinks and mixes with water. Pale blue leaflets, turns pink upon exposure to moist air. | [Reactivity Profile]
A 0.2 molar aqueous solution has a pH of 4.6. COBALT CHLORIDE(7646-79-9) acts as a weakly acidic inorganic salt, which is soluble in water. The resulting solutions contain moderate concentrations of hydrogen ions and have pH's of less than 7.0. They react as acids to neutralize bases. These neutralizations generate heat, but less or far less than is generated by neutralization of inorganic acids, inorganic oxoacids, and carboxylic acid. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible. Many of these compounds catalyze organic reactions. Potassium or sodium metals act to reduce metal halides, producing exothermic reactions, even explosions [Bretherick, 5th Ed., 1995]. | [Air & Water Reactions]
Hygroscopic. Soluble in water. | [Hazard]
May not be used in food products (FDA).
Can cause blood damage. | [Health Hazard]
Inhalation causes respiratory disease, shortness of breath, and coughing; permanent disability may occur. Ingestion causes pain, vomiting, and diarrhea. Contact causes irritation of eyes and may cause skin rash. | [Fire Hazard]
Special Hazards of Combustion Products: Toxic cobalt oxide fumes may form in fire. | [Description]
blue crystals (anhydrous)
violet-blue (dihydrate)
rose red crystals (hexahydrate)
Sinks and mixes with water. Pale blue leaflets, turns pink upon exposure to moist air.
| [Chemical Properties]
(1) Blue, (2) ruby-red crystals.Soluble in water, alcohol, and acetone. | [Physical properties]
Blue leaflets; turns pink in moist air; hygroscopic; the dihydrate is violet blue crystal; the hexahydrate is pink monoclinic crystal; density 3.36, 2.48 and 1.92 g/cm3 for anhydrous salt, dihydrate and hexahydrate, respectively; anhydrous salt melts at 740°C and vaporizes at 1,049°C; vapor pressure 60 torr at 801°C; the hexahydrate decomposes at 87°C; the anhydrous salt and the hydrates are all soluble in water, ethanol, acetone, and ether; the solubility of hydrates in water is greater than the anhydrous salt. | [Definition]
ChEBI: A cobalt salt in which the cobalt metal is in the +2 oxidation state and the counter-anion is chloride. It is used as an indicator for water in desiccants. | [Flammability and Explosibility]
Notclassified | [Biochem/physiol Actions]
Cobalt chloride induces hypoxia condition in cells by upregulating hypoxia-inducible factor-1α (HIF-1α), erythropoietin and glycolytic enzymes. It is also responsible for mitochondrial DNA damage in rat neuronal PC12 cells. It is also responsible for the induction of apoptosis.Cobalt chloride 0.1M solution is an additive screening solution of Additive Screening Kit. Additive Screen kit is designed to allow rapid and convenient evaluation of additives and their ability to influence the crystallization of the sample. The Additive Kit provides a tool for refining crystallization conditions. | [Purification Methods]
A saturated aqueous solution at room temperature is fractionally crystallised by standing overnight. The first half of the material that crystallises in this way is used in the next crystallisation. The process is repeated several times, water being removed in a dry-box using air filtered through glass wool and dried over CaCl2 [Hutchinson J Am Chem Soc 76 1022 1954]. It has also been crystallised from dilute aqueous HCl. The hexahydrate m 86o forms pink to red deliquescent crystals. It loses 4H2O on heating at 52-56o and forms the violet dihydrate which loses a further H2O at 100o to form the violet monohydrate which loses the last H2O at 120-140o to give the pale blue anhydrous deliquescent salt m 735o and b 1049o. A pink solution of CoCl2 in H2O becomes blue on heating to 50o or adding conc HCl which may precipitate the mono or dihydrate. The solid dihydrate gives a blue-purple solution with EtOH. Note: CoCl2 in H2O is a “sympathetic ink”, i.e. writing using an aqueous solution is almost invisible on paper, but becomes blue on warming the paper. On cooling or standing, the writing becomes invisible again. The anhydrous salt is soluble in H2O, EtOH, Et2O, Me2CO and pyridine. [Glemser in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol II p 1515 1965.] |
| Questions And Answer | Back Directory | [Uses]
Cobalt(II) chloride has several applications. It is used in hygrometers; as a
humidity indicator; as a temperature indicator in grinding; as a foam stabilizer in beer; in invisible ink; for painting on glass; in electroplating; and a catalyst in Grignard reactions, promoting coupling with an organic halide. It also is used to prepare several other cobalt salts; and in the manufacture of synthetic vitamin B12.
The vapor-phase co-reductions with other metal halides by hydrogen results in finely divided intermetallics with applications as structural materials or compounds with useful thermoelectric, magnetic, and oxidation-resistance properties.
| [Preparation]
Cobalt(II) chloride is prepared by the action of cobalt metal or its oxide, hydroxide, or carbonate with hydrochloric acid:
Co(OH)2 + 2HCl → CoCl2 + 2H2O
The solution on concentration and cooling forms crystals of hexahydrate which on heating with SOCl2 dehydrates to anhydrous cobalt(II) chloride.
Alternatively, the hexahydrate may be converted to anhydrous CoCl2 by dehydration in a stream of hydrogen chloride and dried in vacuum at 100–150°C.
The anhydrous compound also may be obtained by passing chlorine over cobalt powder.
|
|
|